diff options
Diffstat (limited to 'keyboards/lily58/keymaps/hvp/keymap.c')
| -rw-r--r-- | keyboards/lily58/keymaps/hvp/keymap.c | 181 |
1 files changed, 181 insertions, 0 deletions
diff --git a/keyboards/lily58/keymaps/hvp/keymap.c b/keyboards/lily58/keymaps/hvp/keymap.c new file mode 100644 index 0000000000..67e2541f6b --- /dev/null +++ b/keyboards/lily58/keymaps/hvp/keymap.c @@ -0,0 +1,181 @@ +#include QMK_KEYBOARD_H +#include "hvp.c" + +#ifdef PROTOCOL_LUFA + #include "lufa.h" + #include "split_util.h" +#endif +#ifdef SSD1306OLED + #include "ssd1306.h" +#endif + +#ifdef RGBLIGHT_ENABLE +//Following line allows macro to read current RGB settings +extern rgblight_config_t rgblight_config; +#endif + +extern uint8_t is_master; + +#define _QWERTY 0 +#define _LOWER 1 +#define _RAISE 2 +#define _ADJUST 3 +#define _NAVI 4 + +enum custom_keycodes { + QWERTY = SAFE_RANGE, + LOWER, + RAISE, + NAVI, + ADJUST +}; + + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [_QWERTY] = LAYOUT( + LT(3,KC_ESC), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, + LT(_NAVI,KC_TAB), KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_MINS, + KC_LSFT, KC_A, KC_S, KC_D, LT(4,KC_F), LT(3,KC_G), KC_H, KC_J, KC_K, KC_L, TD(TD1), TD(TD2), + KC_LCTRL, KC_Z, KC_X, KC_C, KC_V, KC_B, MT(MOD_LSFT,KC_BSPC), MT(MOD_LSFT,KC_ENTER), KC_N, KC_M, KC_COMM, KC_DOT, TD(TD3), MT(MOD_RSFT,KC_ENT), + KC_LALT, KC_LGUI, LOWER,LT(1,KC_SPC), LT(2,KC_SPC), RAISE, KC_RALT, KC_RGUI +), +[_RAISE] = LAYOUT( /* Right */ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, + KC_DEL, _______, _______, _______, _______, _______, _______, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, + _______, _______, _______, _______, _______, _______, MT(MOD_LCTL,KC_LBRC), MT(MOD_LALT,KC_RBRC), _______, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, + _______, _______, _______, _______, _______, _______, _______, _______ +), + +[_LOWER] = LAYOUT( /* Left */ + _______, _______, _______, _______, _______, _______, _______, _______, _______,_______, _______, _______, + KC_TILD,KC_EXLM,KC_AT,KC_HASH,KC_DLR,KC_PERC, KC_CIRC,KC_AMPR,KC_ASTR,KC_LPRN,KC_RPRN,KC_BSPC, + KC_DEL, _______, _______, _______, _______, _______, _______, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_BSLS, + _______, _______, _______, _______, _______, _______, MT(MOD_LCTL,KC_LCBR), MT(MOD_LALT,KC_RCBR), _______, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_TILD, + _______, _______, _______, _______, _______, _______, _______, _______ +), + + [_NAVI] = LAYOUT( /* Tab */ + KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, D_NAVI, _______, _______, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_PGUP, KC_END, _______, _______, + _______, KC_VOLD, KC_MPRV, KC_MSTP, KC_MPLY, KC_MNXT, KC_VOLU, _______ + ), + + [_ADJUST] = LAYOUT( /* Esc */ + _______, RGB_TOG, RGB_MOD, RGB_RMOD, _______, _______, _______, KC_7, KC_8, KC_9, KC_0, _______, + _______, RGB_M_P, RGB_HUD, RGB_HUI, _______, _______, _______, KC_4, KC_5, KC_6, _______, _______, + KC_PSCR, _______, RGB_SAD, RGB_SAI, _______, _______, KC_0, KC_1, KC_2, KC_3, _______, _______, + RESET, _______, RGB_VAD, RGB_VAI, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, KC_VOLD, KC_MPRV, KC_MSTP, KC_MPLY, KC_MNXT, KC_VOLU, _______ + ) +}; + +int RGB_current_mode; + +// Setting ADJUST layer RGB back to default +void update_tri_layer_RGB(uint8_t layer1, uint8_t layer2, uint8_t layer3) { + +} + +void matrix_init_user(void) { + #ifdef RGBLIGHT_ENABLE + RGB_current_mode = rgblight_config.mode; + #endif + //SSD1306 OLED init, make sure to add #define SSD1306OLED in config.h + #ifdef SSD1306OLED + iota_gfx_init(!has_usb()); // turns on the display + #endif +} + +//SSD1306 OLED update loop, make sure to add #define SSD1306OLED in config.h +#ifdef SSD1306OLED + +// When add source files to SRC in rules.mk, you can use functions. +const char *read_layer_state(void); +const char *read_logo(void); +void set_keylog(uint16_t keycode, keyrecord_t *record); +const char *read_keylog(void); +const char *read_keylogs(void); + +void matrix_scan_user(void) { + iota_gfx_task(); +} + +void matrix_render_user(struct CharacterMatrix *matrix) { + if (is_master) { + // If you want to change the display of OLED, you need to change here + matrix_write_ln(matrix, read_layer_state()); + matrix_write_ln(matrix, read_keylog()); + matrix_write_ln(matrix, read_keylogs()); + //matrix_write_ln(matrix, read_mode_icon(keymap_config.swap_lalt_lgui)); + //matrix_write_ln(matrix, read_host_led_state()); + //matrix_write_ln(matrix, read_timelog()); + } else { + matrix_write(matrix, read_logo()); + } +} + +void matrix_update(struct CharacterMatrix *dest, const struct CharacterMatrix *source) { + if (memcmp(dest->display, source->display, sizeof(dest->display))) { + memcpy(dest->display, source->display, sizeof(dest->display)); + dest->dirty = true; + } +} + +void iota_gfx_task_user(void) { + struct CharacterMatrix matrix; + matrix_clear(&matrix); + matrix_render_user(&matrix); + matrix_update(&display, &matrix); +} +#endif//SSD1306OLED + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + if (record->event.pressed) { +#ifdef SSD1306OLED + set_keylog(keycode, record); +#endif + // set_timelog(); + } + + switch (keycode) { + case QWERTY: + if (record->event.pressed) { + set_single_persistent_default_layer(_QWERTY); + } + return false; + break; + case LOWER: + if (record->event.pressed) { + layer_on(_LOWER); + update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_LOWER); + update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST); + } + return false; + break; + case RAISE: + if (record->event.pressed) { + layer_on(_RAISE); + update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_RAISE); + update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST); + } + return false; + break; + case ADJUST: + if (record->event.pressed) { + layer_on(_ADJUST); + } else { + layer_off(_ADJUST); + } + return false; + break; + } + return true; +}
\ No newline at end of file |