diff options
Diffstat (limited to 'keyboards/kprepublic')
82 files changed, 600 insertions, 583 deletions
diff --git a/keyboards/kprepublic/bm16a/bm16a.c b/keyboards/kprepublic/bm16a/bm16a.c deleted file mode 100644 index 9676b50119..0000000000 --- a/keyboards/kprepublic/bm16a/bm16a.c +++ /dev/null @@ -1,16 +0,0 @@ -/* Copyright 2019 - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ -#include "bm16a.h" diff --git a/keyboards/kprepublic/bm16a/bm16a.h b/keyboards/kprepublic/bm16a/bm16a.h deleted file mode 100644 index cf8bab4730..0000000000 --- a/keyboards/kprepublic/bm16a/bm16a.h +++ /dev/null @@ -1,39 +0,0 @@ -/* Copyright 2019 - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ -#pragma once - -#include "quantum.h" - -/* This a shortcut to help you visually see your layout. - * - * The first section contains all of the arguments representing the physical - * layout of the board and position of the keys. - * - * The second converts the arguments into a two-dimensional array which - * represents the switch matrix. - */ -#define LAYOUT_ortho_4x4( \ - K01, K02, K03, K04, \ - K11, K12, K13, K14, \ - K21, K22, K23, K24, \ - K31, K32, K33, K34 \ -) \ -{ \ - { K01, K02, K03, K04 }, \ - { K11, K12, K13, K14 }, \ - { K21, K22, K23, K24 }, \ - { K31, K32, K33, K34 } \ -} diff --git a/keyboards/kprepublic/bm16a/config.h b/keyboards/kprepublic/bm16a/config.h deleted file mode 100644 index e5cc440d25..0000000000 --- a/keyboards/kprepublic/bm16a/config.h +++ /dev/null @@ -1,128 +0,0 @@ -/* Copyright 2019 - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#pragma once - -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 4 -#define MATRIX_COLS 4 - -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * -*/ -#define MATRIX_ROW_PINS { D3, D5, D1, D2} -#define MATRIX_COL_PINS { D6, D4, D7, B4} - -/* COL2ROW, ROW2COL*/ -#define DIODE_DIRECTION COL2ROW - -/* - * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. - */ -//#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 - -#define BACKLIGHT_PIN B6 -// #define BACKLIGHT_BREATHING -#define BACKLIGHT_LEVELS 5 - -#define RGB_DI_PIN E2 -#define RGBLED_NUM 4 -#define RGBLIGHT_EFFECT_BREATHING -#define RGBLIGHT_EFFECT_RAINBOW_MOOD -#define RGBLIGHT_EFFECT_RAINBOW_SWIRL -#define RGBLIGHT_EFFECT_SNAKE -#define RGBLIGHT_EFFECT_KNIGHT -#define RGBLIGHT_EFFECT_CHRISTMAS -#define RGBLIGHT_EFFECT_STATIC_GRADIENT -#define RGBLIGHT_EFFECT_RGB_TEST -#define RGBLIGHT_EFFECT_ALTERNATING -#define RGBLIGHT_EFFECT_TWINKLE -// #ifdef RGB_DI_PIN -// #define RGBLED_NUM 16 -// #define RGBLIGHT_HUE_STEP 8 -// #define RGBLIGHT_SAT_STEP 8 -// #define RGBLIGHT_VAL_STEP 8 -// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ -// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ -// #endif - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is userful for the Windows task manager shortcut (ctrl+shift+esc). - */ -// #define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -//#define NO_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT - -/* Bootmagic Lite key configuration */ -// #define BOOTMAGIC_LITE_ROW 0 -// #define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/kprepublic/bm16a/info.json b/keyboards/kprepublic/bm16a/info.json deleted file mode 100644 index 6c616e11d1..0000000000 --- a/keyboards/kprepublic/bm16a/info.json +++ /dev/null @@ -1,33 +0,0 @@ -{ - "keyboard_name": "bm16a", - "manufacturer": "KPrepublic", - "url": "", - "maintainer": "qmk", - "usb": { - "vid": "0x4B50", - "pid": "0x016A", - "device_version": "0.0.1" - }, - "layouts": { - "LAYOUT_ortho_4x4": { - "layout": [ - {"x":0, "y":0}, - {"x":1, "y":0}, - {"x":2, "y":0}, - {"x":3, "y":0}, - {"x":0, "y":1}, - {"x":1, "y":1}, - {"x":2, "y":1}, - {"x":3, "y":1}, - {"x":0, "y":2}, - {"x":1, "y":2}, - {"x":2, "y":2}, - {"x":3, "y":2}, - {"x":0, "y":3}, - {"x":1, "y":3}, - {"x":2, "y":3}, - {"x":3, "y":3} - ] - } - } - } diff --git a/keyboards/kprepublic/bm16a/rules.mk b/keyboards/kprepublic/bm16a/rules.mk deleted file mode 100644 index 325564a154..0000000000 --- a/keyboards/kprepublic/bm16a/rules.mk +++ /dev/null @@ -1,20 +0,0 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = atmel-dfu - -# Build Options -# change yes to no to disable -# -BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite -MOUSEKEY_ENABLE = yes # Mouse keys -EXTRAKEY_ENABLE = yes # Audio control and System control -CONSOLE_ENABLE = no # Console for debug -COMMAND_ENABLE = no # Commands for debug and configuration -NKRO_ENABLE = yes # Enable N-Key Rollover -BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality -RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow -AUDIO_ENABLE = no # Audio output - -LAYOUTS = ortho_4x4 diff --git a/keyboards/kprepublic/bm16a/v1/info.json b/keyboards/kprepublic/bm16a/v1/info.json new file mode 100644 index 0000000000..6c700b37b8 --- /dev/null +++ b/keyboards/kprepublic/bm16a/v1/info.json @@ -0,0 +1,75 @@ +{ + "keyboard_name": "bm16a", + "manufacturer": "KPrepublic", + "url": "", + "maintainer": "qmk", + "usb": { + "vid": "0x4B50", + "pid": "0x016A", + "device_version": "0.0.1" + }, + "processor": "atmega32u4", + "bootloader": "atmel-dfu", + "features": { + "bootmagic": true, + "mousekey": true, + "extrakey": true, + "console": false, + "command": false, + "nkro": true, + "backlight": true, + "rgblight": true, + "audio": false + }, + "matrix_pins": { + "rows": ["D3", "D5", "D1", "D2"], + "cols": ["D6", "D4", "D7", "B4"] + }, + "diode_direction": "COL2ROW", + "backlight": { + "pin": "B6", + "levels": 5 + }, + "rgblight": { + "pin": "E2", + "led_count": 4, + "animations": { + "breathing": true, + "rainbow_mood": true, + "rainbow_swirl": true, + "snake": true, + "knight": true, + "christmas": true, + "static_gradient": true, + "rgb_test": true, + "alternating": true, + "twinkle": true + } + }, + "community_layouts": ["ortho_4x4"], + "layouts": { + "LAYOUT_ortho_4x4": { + "layout": [ + {"matrix": [0, 0], "x": 0, "y": 0}, + {"matrix": [0, 1], "x": 1, "y": 0}, + {"matrix": [0, 2], "x": 2, "y": 0}, + {"matrix": [0, 3], "x": 3, "y": 0}, + + {"matrix": [1, 0], "x": 0, "y": 1}, + {"matrix": [1, 1], "x": 1, "y": 1}, + {"matrix": [1, 2], "x": 2, "y": 1}, + {"matrix": [1, 3], "x": 3, "y": 1}, + + {"matrix": [2, 0], "x": 0, "y": 2}, + {"matrix": [2, 1], "x": 1, "y": 2}, + {"matrix": [2, 2], "x": 2, "y": 2}, + {"matrix": [2, 3], "x": 3, "y": 2}, + + |