diff options
Diffstat (limited to 'keyboards/kprepublic/bm68hsrgb/rev1')
6 files changed, 10 insertions, 13 deletions
diff --git a/keyboards/kprepublic/bm68hsrgb/rev1/config.h b/keyboards/kprepublic/bm68hsrgb/rev1/config.h index 636ff1c785..9b9d534c42 100644 --- a/keyboards/kprepublic/bm68hsrgb/rev1/config.h +++ b/keyboards/kprepublic/bm68hsrgb/rev1/config.h @@ -19,13 +19,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #include "config_common.h" -/* USB Device descriptor parameter */ -#define VENDOR_ID 0x4B50 //KP -#define PRODUCT_ID 0xEF6F -#define DEVICE_VER 0x0001 -#define MANUFACTURER KPRepublic -#define PRODUCT BM68HSRGB - /* key matrix size */ #define MATRIX_ROWS 5 #define MATRIX_COLS 15 @@ -46,7 +39,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. B3, \ E6 } #define MATRIX_COL_PINS { D0, D1, D2, D3, D5, D4, D6, D7, B4, B5, B6, C6, C7, F7, F6 } -#define UNUSED_PINS /* COL2ROW, ROW2COL */ #define DIODE_DIRECTION COL2ROW diff --git a/keyboards/kprepublic/bm68hsrgb/rev1/info.json b/keyboards/kprepublic/bm68hsrgb/rev1/info.json index 0a72da6e98..c89d5262ba 100644 --- a/keyboards/kprepublic/bm68hsrgb/rev1/info.json +++ b/keyboards/kprepublic/bm68hsrgb/rev1/info.json @@ -1,7 +1,13 @@ { - "keyboard_name": "BM68HSRGB", + "keyboard_name": "BM68HSRGB Rev1", + "manufacturer": "KPrepublic", "url": "", "maintainer": "peepeetee", + "usb": { + "vid": "0x4B50", + "pid": "0xEF6F", + "device_version": "0.0.1" + }, "layouts": { "LAYOUT_65_ansi": { "layout": [ diff --git a/keyboards/kprepublic/bm68hsrgb/rev1/keymaps/default/keymap.c b/keyboards/kprepublic/bm68hsrgb/rev1/keymaps/default/keymap.c index 878967718f..feea65f84c 100644 --- a/keyboards/kprepublic/bm68hsrgb/rev1/keymaps/default/keymap.c +++ b/keyboards/kprepublic/bm68hsrgb/rev1/keymaps/default/keymap.c @@ -34,7 +34,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_GRAVE, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, _______, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, QK_BOOT, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, QK_BOOT, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ), diff --git a/keyboards/kprepublic/bm68hsrgb/rev1/keymaps/peepeetee/config.h b/keyboards/kprepublic/bm68hsrgb/rev1/keymaps/peepeetee/config.h index 0748f83cdc..3ddb813486 100644 --- a/keyboards/kprepublic/bm68hsrgb/rev1/keymaps/peepeetee/config.h +++ b/keyboards/kprepublic/bm68hsrgb/rev1/keymaps/peepeetee/config.h @@ -35,7 +35,6 @@ // #define MOUSEKEY_MAX_SPEED 10 // #define MOUSEKEY_WHEEL_DELAY 0 #define FORCE_NKRO // NKRO by default requires to be turned on, this forces it on during keyboard startup regardless of EEPROM setting. NKRO can still be turned off but will be turned on again if the keyboard reboots. -// #define QMK_KEYS_PER_SCAN 4 // Allows sending more than one key per scan. By default, only one key event gets sent via process_record() per scan. This has little impact on most typing, but if you're doing a lot of chords, or your scan rate is slow to begin with, you can have some delay in processing key events. Each press and release is a separate event. For a keyboard with 1ms or so scan times, even a very fast typist isn't going to produce the 500 keystrokes a second needed to actually get more than a few ms of delay from this. But if you're doing chording on something with 3-4ms scan times? You probably want this. // #define STRICT_LAYER_RELEASE // Force a key release to be evaluated using the current layer stack instead of remembering which layer it came from (used for advanced cases) // #define LOCKING_SUPPORT_ENABLE // Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap // #define LOCKING_RESYNC_ENABLE // Tries to keep switch state consistent with keyboard LED state diff --git a/keyboards/kprepublic/bm68hsrgb/rev1/keymaps/peepeetee/keymap.c b/keyboards/kprepublic/bm68hsrgb/rev1/keymaps/peepeetee/keymap.c index 934463b11f..bf842b138b 100644 --- a/keyboards/kprepublic/bm68hsrgb/rev1/keymaps/peepeetee/keymap.c +++ b/keyboards/kprepublic/bm68hsrgb/rev1/keymaps/peepeetee/keymap.c @@ -35,7 +35,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_GRAVE, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_DELETE, RGB_MOD, RGB_HUI, RGB_VAI, RGB_SAI, RGB_SPI, _______, KC_KP_7, KC_KP_8, KC_KP_9, _______, _______, _______, _______, _______, KC_PGUP, RGB_TOG, RGB_HUD, RGB_VAD, RGB_SAD, RGB_SPD, _______, KC_KP_4, KC_KP_5, KC_KP_6, _______, _______, _______, _______, KC_PGDOWN, - BL_TOGG, _______, _______, _______, _______, RESET, KC_KP_1, KC_KP_2, KC_KP_3, _______, _______, _______, KC_AUDIO_VOL_UP, KC_END, + BL_TOGG, _______, _______, _______, _______, QK_BOOT, KC_KP_1, KC_KP_2, KC_KP_3, _______, _______, _______, KC_AUDIO_VOL_UP, KC_END, _______, _______, _______, _______, _______, _______, _______, KC_BRIGHTNESS_DOWN, KC_AUDIO_VOL_DOWN, KC_BRIGHTNESS_UP ), diff --git a/keyboards/kprepublic/bm68hsrgb/rev1/keymaps/via/keymap.c b/keyboards/kprepublic/bm68hsrgb/rev1/keymaps/via/keymap.c index 453853fc63..09df21f267 100644 --- a/keyboards/kprepublic/bm68hsrgb/rev1/keymaps/via/keymap.c +++ b/keyboards/kprepublic/bm68hsrgb/rev1/keymaps/via/keymap.c @@ -34,7 +34,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_GRAVE, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, _______, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, QK_BOOT, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, QK_BOOT, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ), [2] = LAYOUT_65_ansi( |