4 files changed, 10 insertions, 37 deletions
diff --git a/keyboards/kprepublic/bm60hsrgb/rev1/config.h b/keyboards/kprepublic/bm60hsrgb/rev1/config.h
index a50d259582..df94a6d357 100644
--- a/keyboards/kprepublic/bm60hsrgb/rev1/config.h
+++ b/keyboards/kprepublic/bm60hsrgb/rev1/config.h
@@ -17,31 +17,11 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-
-//                         0   1   2   3   4   5   6   7   8   9   A   B   C   D
-#define MATRIX_ROW_PINS { B0, B1, B2, B3, E6 }
-#define MATRIX_COL_PINS { D0, D1, D2, D3, D5, D4, D6, D7, B4, B5, B6, C6, C7, F7 }
-
-#define DIODE_DIRECTION COL2ROW
-
 #define RGB_DI_PIN E2
 #define RGB_MATRIX_LED_COUNT 69
-#ifdef RGB_DI_PIN
 #    define RGBLED_NUM 69
 #    define RGB_MATRIX_KEYPRESSES
 #    define RGBLIGHT_LIMIT_VAL 180 // Limit to vendor-recommended value
-#endif
 #ifdef RGB_MATRIX_ENABLE
 #    define RGB_MATRIX_MAXIMUM_BRIGHTNESS 180 // Limit to vendor-recommended value
 // RGB Matrix Animation modes. Explicitly enabled
diff --git a/keyboards/kprepublic/bm60hsrgb/rev1/info.json b/keyboards/kprepublic/bm60hsrgb/rev1/info.json
index ba4d0fcae5..4df7872080 100644
--- a/keyboards/kprepublic/bm60hsrgb/rev1/info.json
+++ b/keyboards/kprepublic/bm60hsrgb/rev1/info.json
@@ -8,6 +8,11 @@
         "pid": "0xEF8C",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["D0", "D1", "D2", "D3", "D5", "D4", "D6", "D7", "B4", "B5", "B6", "C6", "C7", "F7"],
+        "rows": ["B0", "B1", "B2", "B3", "E6"]
+    },
+    "diode_direction": "COL2ROW",
     "processor": "atmega32u4",
     "bootloader": "atmel-dfu",
     "layout_aliases": {
diff --git a/keyboards/kprepublic/bm60hsrgb/rev2/config.h b/keyboards/kprepublic/bm60hsrgb/rev2/config.h
index b30eb50679..bc48c2ec34 100644
--- a/keyboards/kprepublic/bm60hsrgb/rev2/config.h
+++ b/keyboards/kprepublic/bm60hsrgb/rev2/config.h
@@ -15,23 +15,6 @@
  */
 #pragma once
 
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { E6, D2, D3, D5, F6 }
-#define MATRIX_COL_PINS { B2, B3, B7, B0, B1, F7, D4, D6, D7, B4, B5, B6, C6, C7 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION ROW2COL
-
 //rgb light setting
 #define RGBLIGHT_LIMIT_VAL 150
 #define RGBLED_NUM          6
diff --git a/keyboards/kprepublic/bm60hsrgb/rev2/info.json b/keyboards/kprepublic/bm60hsrgb/rev2/info.json
index 9a765bc984..9fe0adf4f4 100644
--- a/keyboards/kprepublic/bm60hsrgb/rev2/info.json
+++ b/keyboards/kprepublic/bm60hsrgb/rev2/info.json
@@ -8,6 +8,11 @@
         "pid": "0x1121",
         "device_version": "0.0.2"
     },
+    "matrix_pins": {
+        "cols": ["B2", "B3", "B7", "B0", "B1", "F7", "D4", "D6", "D7", "B4", "B5", "B6", "C6", "C7"],
+        "rows": ["E6", "D2", "D3", "D5", "F6"]
+    },
+    "diode_direction": "ROW2COL",
     "processor": "atmega32u4",
     "bootloader": "atmel-dfu",
     "debounce": 3,