8 files changed, 0 insertions, 247 deletions
diff --git a/keyboards/kira75/config.h b/keyboards/kira75/config.h
deleted file mode 100644
index 17c73df412..0000000000
--- a/keyboards/kira75/config.h
+++ /dev/null
@@ -1,106 +0,0 @@
-/*
-Copyright 2018 MechMerlin
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#pragma once
-
-#include "config_common.h"
-
-/* key matrix size */
-#define MATRIX_ROWS 6
-#define MATRIX_COLS 16
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { D0, D1, D2, D3, D5, D4 }
-#define MATRIX_COL_PINS { F6, F7, C7, C6, B6, B5, B4, F5, F4, F1, F0, E6, B3, B2, B1, B0 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
-#define BACKLIGHT_PIN B7
-#define BACKLIGHT_BREATHING
-#define BACKLIGHT_LEVELS 3
-
-#define RGB_DI_PIN E2
-#define RGBLIGHT_ANIMATIONS
-#define RGBLED_NUM 18
-#define RGBLIGHT_HUE_STEP 8
-#define RGBLIGHT_SAT_STEP 8
-#define RGBLIGHT_VAL_STEP 8
-
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
-/* number of backlight levels */
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-// #define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
- * Feature disable options
- *  These options are also useful to firmware size reduction.
- */
-
-/* disable debug print */
-//#define NO_DEBUG
-
-/* disable print */
-//#define NO_PRINT
-
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT
diff --git a/keyboards/kira75/info.json b/keyboards/kira75/info.json
deleted file mode 100644
index 37bded93f7..0000000000
--- a/keyboards/kira75/info.json
+++ /dev/null
@@ -1,16 +0,0 @@
-{
-    "keyboard_name": "Kira 75", 
-    "manufacturer": "thesiscamper",
-    "url": "", 
-    "maintainer": "qmk", 
-    "usb": {
-        "vid": "0xFEED",
-        "pid": "0x0000",
-        "device_version": "0.0.1"
-    },
-    "layouts": {
-        "LAYOUT": {
-            "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":1, "y":0}, {"label":"F2", "x":2, "y":0}, {"label":"F3", "x":3, "y":0}, {"label":"F4", "x":4, "y":0}, {"label":"F5", "x":5, "y":0}, {"label":"F6", "x":6, "y":0}, {"label":"F7", "x":7, "y":0}, {"label":"F8", "x":8, "y":0}, {"label":"F9", "x":9, "y":0}, {"label":"F10", "x":10, "y":0}, {"label":"F11", "x":11, "y":0}, {"label":"F12", "x":12, "y":0}, {"label":"PrtSc", "x":13, "y":0}, {"label":"Pause", "x":14, "y":0}, {"label":"Delete", "x":15, "y":0}, {"label":"~", "x":0, "y":1}, {"label":"!", "x":1, "y":1}, {"label":"@", "x":2, "y":1}, {"label":"#", "x":3, "y":1}, {"label":"$", "x":4, "y":1}, {"label":"%", "x":5, "y":1}, {"label":"^", "x":6, "y":1}, {"label":"&", "x":7, "y":1}, {"label":"*", "x":8, "y":1}, {"label":"(", "x":9, "y":1}, {"label":")", "x":10, "y":1}, {"label":"_", "x":11, "y":1}, {"label":"+", "x":12, "y":1}, {"label":"Backspace", "x":13, "y":1, "w":2}, {"label":"Home", "x":15, "y":1}, {"label":"Tab", "x":0, "y":2, "w":1.5}, {"label":"Q", "x":1.5, "y":2}, {"label":"W", "x":2.5, "y":2}, {"label":"E", "x":3.5, "y":2}, {"label":"R", "x":4.5, "y":2}, {"label":"T", "x":5.5, "y":2}, {"label":"Y", "x":6.5, "y":2}, {"label":"U", "x":7.5, "y":2}, {"label":"I", "x":8.5, "y":2}, {"label":"O", "x":9.5, "y":2}, {"label":"P", "x":10.5, "y":2}, {"label":"{", "x":11.5, "y":2}, {"label":"}", "x":12.5, "y":2}, {"label":"|", "x":13.5, "y":2, "w":1.5}, {"label":"Page Up", "x":15, "y":2}, {"label":"Caps Lock", "x":0, "y":3, "w":1.75}, {"label":"A", "x":1.75, "y":3}, {"label":"S", "x":2.75, "y":3}, {"label":"D", "x":3.75, "y":3}, {"label":"F", "x":4.75, "y":3}, {"label":"G", "x":5.75, "y":3}, {"label":"H", "x":6.75, "y":3}, {"label":"J", "x":7.75, "y":3}, {"label":"K", "x":8.75, "y":3}, {"label":"L", "x":9.75, "y":3}, {"label":":", "x":10.75, "y":3}, {"label":"\"", "x":11.75, "y":3}, {"label":"Enter", "x":12.75, "y":3, "w":2.25}, {"label":"Page Down", "x":15, "y":3}, {"label":"Shift", "x":0, "y":4, "w":2.25}, {"label":"Z", "x":2.25, "y":4}, {"label":"X", "x":3.25, "y":4}, {"label":"C", "x":4.25, "y":4}, {"label":"V", "x":5.25, "y":4}, {"label":"B", "x":6.25, "y":4}, {"label":"N", "x":7.25, "y":4}, {"label":"M", "x":8.25, "y":4}, {"label":"<", "x":9.25, "y":4}, {"label":">", "x":10.25, "y":4}, {"label":"?", "x":11.25, "y":4}, {"label":"Shift", "x":12.25, "y":4, "w":1.75}, {"label":"\u2191", "x":14, "y":4}, {"label":"End", "x":15, "y":4}, {"label":"Ctrl", "x":0, "y":5, "w":1.25}, {"label":"Win", "x":1.25, "y":5, "w":1.25}, {"label":"Alt", "x":2.5, "y":5, "w":1.25}, {"x":3.75, "y":5, "w":6.25}, {"label":"Alt", "x":10, "y":5, "w":1.5}, {"label":"Ctrl", "x":11.5, "y":5, "w":1.5}, {"label":"\u2190", "x":13, "y":5}, {"label":"\u2193", "x":14, "y":5}, {"label":"\u2192", "x":15, "y":5}]
-        }
-    }
-}
diff --git a/keyboards/kira75/keymaps/default/keymap.c b/keyboards/kira75/keymaps/default/keymap.c
deleted file mode 100644
index b8458ab463..0000000000
--- a/keyboards/kira75/keymaps/default/keymap.c
+++ /dev/null
@@ -1,27 +0,0 @@
-/* Copyright 2018 MechMerlin
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-#include QMK_KEYBOARD_H
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-[0] = LAYOUT( /* Base */
-  KC_ESC,  KC_F1,  KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_INS,
-  KC_TILD, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL,
-  KC_TAB,  KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGUP,
-  KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGDN,
-  KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, MO(1),
-  KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RCTL, KC_LEFT, KC_DOWN, KC_RIGHT
-),
-};
diff --git a/keyboards/kira75/keymaps/default/readme.md b/keyboards/kira75/keymaps/default/readme.md
deleted file mode 100644
index fcf6f71110..0000000000
--- a/keyboards/kira75/keymaps/default/readme.md
+++ /dev/null
@@ -1 +0,0 @@
-# The default keymap for kira75
diff --git a/keyboards/kira75/kira75.c b/keyboards/kira75/kira75.c
deleted file mode 100644
index bf9afcc8f1..0000000000
--- a/keyboards/kira75/kira75.c
+++ /dev/null
@@ -1,16 +0,0 @@
-/* Copyright 2018 MechMerlin
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-#include "kira75.h"
diff --git a/keyboards/kira75/kira75.h b/keyboards/kira75/kira75.h
deleted file mode 100644
index 27fdab02db..0000000000
--- a/keyboards/kira75/kira75.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/* Copyright 2018 MechMerlin
-
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#pragma once
-
-#include "quantum.h"
-
-// Functions for setting LEDs on toggle keys
-inline void caps_led_on(void)     { DDRD |=  (1<<7); PORTD &= ~(1<<7); }
-inline void caps_led_off(void)    { DDRD &= ~(1<<7); PORTD &= ~(1<<7); }
-
-inline void num_led_on(void)      { DDRD |=  (1<<6); PORTD &= ~(1<<6); }
-inline void num_led_off(void)     { DDRD &= ~(1<<6); PORTD &= ~(1<<6); }
-
-#define XXX KC_NO
-
-// This a shortcut to help you visually see your layout.
-// The following is an example using the Planck MIT layout
-// The first section contains all of the arguments
-// The second converts the arguments into a two-dimensional array
-#define LAYOUT( \
-    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E, k0F, \
-    k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D,      k1F, \
-    k20,      k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, k2E, k2F, \
-    k30,      k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D,      k3F, \
-         k41, k42, k43, k44, k45, k46, k47, k48, k49, k4A, k4B, k4D, k4E,      k4F, \
-    k50, k51,      k53,           k56,                k5A, k5B, k5D, k5E,      k5F \
-) { \
-    { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E, k0F }, \
-    { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, XXX, k1F }, \
-    { k20, XXX, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, k2E, k2F }, \
-    { k30, XXX, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, XXX, k3F }, \
-    { XXX, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4A, k4B, XXX, k4D, k4E, k4F }, \
-    { k50, k51, XXX, k53, XXX, XXX, k56, XXX, XXX, XXX, k5A, k5B, XXX, k5D, k5E, k5F } \
-}
diff --git a/keyboards/kira75/readme.md b/keyboards/kira75/readme.md
deleted file mode 100644
index 5ab0b3f2cc..0000000000
--- a/keyboards/kira75/readme.md
+++ /dev/null
@@ -1,15 +0,0 @@
-# Kira 75
-
-![kira75](imgur.com image replace me!)
-
-75% keyboard designed by thesiscamper
-
-Keyboard Maintainer: [MechMerlin](https://github.com/mechmerlin)     
-Hardware Supported: Kira 75     
-Hardware Availability: Group Buy      
-
-Make example for this keyboard (after setting up your build environment):
-
-    make kira75:default
-
-See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information.
diff --git a/keyboards/kira75/rules.mk b/keyboards/kira75/rules.mk
deleted file mode 100644
index 532462bca2..0000000000
--- a/keyboards/kira75/rules.mk
+++ /dev/null
@@ -1,18 +0,0 @@
-# MCU name
-MCU = atmega32u4
-
-# Bootloader selection
-BOOTLOADER = atmel-dfu
-
-# Build Options
-#   change yes to no to disable
-#
-BOOTMAGIC_ENABLE = no       # Enable Bootmagic Lite
-MOUSEKEY_ENABLE = no       # Mouse keys
-EXTRAKEY_ENABLE = yes       # Audio control and System control
-CONSOLE_ENABLE = yes        # Console for debug
-COMMAND_ENABLE = yes        # Commands for debug and configuration
-NKRO_ENABLE = no            # Enable N-Key Rollover
-BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality
-RGBLIGHT_ENABLE = yes        # Enable keyboard RGB underglow
-AUDIO_ENABLE = no           # Audio output