diff options
Diffstat (limited to 'keyboards/kinesis/kintlc/config.h')
| -rw-r--r-- | keyboards/kinesis/kintlc/config.h | 101 |
1 files changed, 0 insertions, 101 deletions
diff --git a/keyboards/kinesis/kintlc/config.h b/keyboards/kinesis/kintlc/config.h deleted file mode 100644 index 4ee9f9ca6f..0000000000 --- a/keyboards/kinesis/kintlc/config.h +++ /dev/null @@ -1,101 +0,0 @@ -/* Copyright 2020 QMK - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#pragma once - -/* key matrix size */ -#define MATRIX_ROWS 15 -#define MATRIX_COLS 7 - -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * - */ -#define MATRIX_ROW_PINS \ - { \ - LINE_PIN8, /* ROW_EQL */ \ - LINE_PIN9, /* ROW_1 */ \ - LINE_PIN10, /* ROW_2 */ \ - LINE_PIN11, /* ROW_3 */ \ - LINE_PIN7, /* ROW_4 */ \ - LINE_PIN16, /* ROW_5 */ \ - LINE_PIN5, /* ROW_6 */ \ - LINE_PIN3, /* ROW_7 */ \ - LINE_PIN4, /* ROW_8 */ \ - LINE_PIN1, /* ROW_9 */ \ - LINE_PIN0, /* ROW_0 */ \ - LINE_PIN2, /* ROW_MIN */ \ - LINE_PIN17, /* ROW_ESC */ \ - LINE_PIN23, /* ROW_F1 */ \ - LINE_PIN21 /* ROW_F2 */ \ - } - -#define MATRIX_COL_PINS \ - { \ - LINE_PIN18, /* COL_0 */ \ - LINE_PIN14, /* COL_1 */ \ - LINE_PIN15, /* COL_2 */ \ - LINE_PIN20, /* COL_3 */ \ - LINE_PIN22, /* COL_4 */ \ - LINE_PIN19, /* COL_5 */ \ - LINE_PIN6 /* COL_6 */ \ - } - - -/* COL2ROW or ROW2COL */ -#define DIODE_DIRECTION COL2ROW - -/* Well-worn Cherry MX key switches can bounce for up to 20ms, despite the - * Cherry data sheet specifying 5ms. Because we use the sym_eager_pk debounce - * algorithm, this debounce latency only affects key releases (not key - * presses). */ -#undef DEBOUNCE -#define DEBOUNCE 20 - -#define IGNORE_MOD_TAP_INTERRUPT - -// The Teensy LC power consumption is unknown as per -// https://www.pjrc.com/store/teensylc.html but since -// https://www.pjrc.com/store/teensy41.html says 100mA, let's go with half. -#define USB_MAX_POWER_CONSUMPTION 50 - -/* We use the i.MX RT1060 high-speed GPIOs (GPIO6-9) which are connected to the - * AHB bus (AHB_CLK_ROOT), which runs at the same speed as the ARM Core Clock, - * i.e. 600 MHz. See MIMXRT1062, page 949, 12.1 Chip-specific GPIO information. - * No additional delay is necessary. */ - -// in clock cycles -#define GPIO_INPUT_PIN_DELAY 0 - -// The default "1" results in LEDs being on when they should be off and -// the other way around. -#define LED_PIN_ON_STATE 0 - -// Discussion about which Teensy LC pins can be used for driving staus LEDs: -// https://github.com/kinx-project/kint/issues/55 -// Discussion about using Neopixel LEDs: -// https://github.com/kinx-project/kint/issues/32 -// Available pins can be seen in: -// /lib/chibios-contrib/os/hal/boards/PJRC_TEENSY_LC/board.h -#define LED_CAPS_LOCK_PIN LINE_PIN12 -#define LED_SCROLL_LOCK_PIN LINE_PIN25 -#define LED_COMPOSE_PIN LINE_PIN24 |