diff options
Diffstat (limited to 'keyboards/kinesis/kint41/config.h')
| -rw-r--r-- | keyboards/kinesis/kint41/config.h | 105 |
1 files changed, 105 insertions, 0 deletions
diff --git a/keyboards/kinesis/kint41/config.h b/keyboards/kinesis/kint41/config.h new file mode 100644 index 0000000000..349d3ee364 --- /dev/null +++ b/keyboards/kinesis/kint41/config.h @@ -0,0 +1,105 @@ +/* Copyright 2020 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +/* USB Device descriptor parameter */ +#undef VENDOR_ID +#define VENDOR_ID 0x1209 +#undef PRODUCT_ID +#define PRODUCT_ID 0x345C +#undef DEVICE_VER +#define DEVICE_VER 0x0001 +#undef MANUFACTURER +#define MANUFACTURER "https://github.com/stapelberg" +#undef PRODUCT +#define PRODUCT "kinT (kint41)" + +/* key matrix size */ +#define MATRIX_ROWS 15 +#define MATRIX_COLS 7 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * + */ +#define MATRIX_ROW_PINS \ + { \ + LINE_PIN8, /* ROW_EQL */ \ + LINE_PIN9, /* ROW_1 */ \ + LINE_PIN10, /* ROW_2 */ \ + LINE_PIN11, /* ROW_3 */ \ + LINE_PIN7, /* ROW_4 */ \ + LINE_PIN16, /* ROW_5 */ \ + LINE_PIN5, /* ROW_6 */ \ + LINE_PIN3, /* ROW_7 */ \ + LINE_PIN4, /* ROW_8 */ \ + LINE_PIN1, /* ROW_9 */ \ + LINE_PIN0, /* ROW_0 */ \ + LINE_PIN2, /* ROW_MIN */ \ + LINE_PIN17, /* ROW_ESC */ \ + LINE_PIN23, /* ROW_F1 */ \ + LINE_PIN21 /* ROW_F2 */ \ + } + +#define MATRIX_COL_PINS \ + { \ + LINE_PIN18, /* COL_0 */ \ + LINE_PIN14, /* COL_1 */ \ + LINE_PIN15, /* COL_2 */ \ + LINE_PIN20, /* COL_3 */ \ + LINE_PIN22, /* COL_4 */ \ + LINE_PIN19, /* COL_5 */ \ + LINE_PIN6 /* COL_6 */ \ + } + +#define UNUSED_PINS + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* Well-worn Cherry MX key switches can bounce for up to 20ms, despite the + * Cherry data sheet specifying 5ms. Because we use the sym_eager_pk debounce + * algorithm, this debounce latency only affects key releases (not key + * presses). */ +#undef DEBOUNCE +#define DEBOUNCE 20 + +#define IGNORE_MOD_TAP_INTERRUPT + +// Reduce input latency by lowering the USB polling interval +// from its 10ms default to the 125μs minimum that USB 2.x (High Speed) allows: +#define USB_POLLING_INTERVAL_MS 1 + +/* We use the i.MX RT1060 high-speed GPIOs (GPIO6-9) which are connected to the + * AHB bus (AHB_CLK_ROOT), which runs at the same speed as the ARM Core Clock, + * i.e. 600 MHz. See MIMXRT1062, page 949, 12.1 Chip-specific GPIO information. + * No additional delay is necessary. */ + +// in clock cycles +#define GPIO_INPUT_PIN_DELAY 0 + +#define LED_PIN_ON_STATE 0 +#define LED_NUM_LOCK_PIN LINE_PIN26 +#define LED_CAPS_LOCK_PIN LINE_PIN12 +#define LED_SCROLL_LOCK_PIN LINE_PIN25 +#define LED_COMPOSE_PIN LINE_PIN24 |