diff options
Diffstat (limited to 'keyboards/keyhive/honeycomb/matrix.c')
| -rwxr-xr-x | keyboards/keyhive/honeycomb/matrix.c | 196 |
1 files changed, 0 insertions, 196 deletions
diff --git a/keyboards/keyhive/honeycomb/matrix.c b/keyboards/keyhive/honeycomb/matrix.c deleted file mode 100755 index c8a7992ec5..0000000000 --- a/keyboards/keyhive/honeycomb/matrix.c +++ /dev/null @@ -1,196 +0,0 @@ -/* -Copyright 2012 Jun Wako -Copyright 2014 Jack Humbert -Copyright 2019 @filoxo - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ -#include <stdint.h> -#include <stdbool.h> -#if defined(__AVR__) -#include <avr/io.h> -#endif -#include "wait.h" -#include "print.h" -#include "debug.h" -#include "util.h" -#include "matrix.h" -#include "timer.h" -#include "honeycomb.h" -#include "pointing_device.h" -#include "report.h" -#include "uart.h" - -#if (MATRIX_COLS <= 8) -# define print_matrix_header() print("\nr/c 01234567\n") -# define print_matrix_row(row) print_bin_reverse8(matrix_get_row(row)) -# define ROW_SHIFTER ((uint8_t)1) -#elif (MATRIX_COLS <= 16) -# define print_matrix_header() print("\nr/c 0123456789ABCDEF\n") -# define print_matrix_row(row) print_bin_reverse16(matrix_get_row(row)) -# define ROW_SHIFTER ((uint16_t)1) -#elif (MATRIX_COLS <= 32) -# define print_matrix_header() print("\nr/c 0123456789ABCDEF0123456789ABCDEF\n") -# define print_matrix_row(row) print_bin_reverse32(matrix_get_row(row)) -# define ROW_SHIFTER ((uint32_t)1) -#endif - -#define UART_MATRIX_RESPONSE_TIMEOUT 10000 - -/* matrix state(1:on, 0:off) */ -static matrix_row_t matrix[MATRIX_ROWS]; -//extern int8_t encoderValue; -int8_t encoderValue = 0; - -__attribute__ ((weak)) -void matrix_init_quantum(void) { - matrix_init_kb(); -} - -__attribute__ ((weak)) -void matrix_scan_quantum(void) { - matrix_scan_kb(); -} - -__attribute__ ((weak)) -void matrix_init_kb(void) { - matrix_init_user(); -} - -__attribute__ ((weak)) -void matrix_scan_kb(void) { - matrix_scan_user(); -} - -__attribute__ ((weak)) -void matrix_init_user(void) { -} - -__attribute__ ((weak)) -void matrix_scan_user(void) { -} - -inline -uint8_t matrix_rows(void) { - return MATRIX_ROWS; -} - -inline -uint8_t matrix_cols(void) { - return MATRIX_COLS; -} - -void matrix_init(void) { - - matrix_init_quantum(); - uart_init(1000000); -} - -uint8_t matrix_scan(void) -{ - uint32_t timeout = 0; - - // The 's' character requests the RF slave to send the matrix - uart_write('s'); - - // Trust the external keystates entirely, erase the last data - uint8_t uart_data[4] = {0}; - - // There are 3 bytes corresponding to the data, and a checksum - for (uint8_t i = 0; i < 4; i++) { - // Wait for the serial data, timeout if it's been too long - // This only happened in testing with a loose wire, but does no - // harm to leave it in here - while(!uart_available()){ - timeout++; - if (timeout > UART_MATRIX_RESPONSE_TIMEOUT) { - break; - } - } - - if (timeout < UART_MATRIX_RESPONSE_TIMEOUT) { - uart_data[i] = uart_read(); - } else { - uart_data[i] = 0x00; - } - } - - // Check for the end packet, it's our checksum. - // Will only be a match if the correct bytes were recieved - if (uart_data[3] == (uart_data[0] ^ uart_data[1] ^ uart_data[2])) { // This is an arbitrary checksum calculated by XORing all the data. - // Transferring the keystates to the QMK matrix variable - /* ASSUMING MSB FIRST */ - matrix[0] = ((uint16_t) uart_data[0] << 8) | ((uint16_t) uart_data[1]); - encoderValue += (int8_t) uart_data[2]; - if ((uart_data[0] | uart_data[1] | uart_data[2])!=0){ - xprintf("\r\n0x%0X%02X%02X",uart_data[0],uart_data[1], uart_data[2]); - } - /* OK, TURNS OUT THAT WAS A BAD ASSUMPTION */ - for (uint8_t i = 0; i < MATRIX_ROWS; i++) { - // I've unpacked these into the mirror image of what QMK expects them to be, so... - matrix[i] = bitrev16(matrix[i]); - // So I'll reverse it, and this should be fine now. - } - - // A mouse report for scrolling would go here, but I don't plan on doing scrolling with the encoder. So. - - report_mouse_t currentReport = {}; -/* - currentReport = pointing_device_get_report(); - //mouseReport.x = 127 max -127 min - currentReport.x = (int8_t) uart_data[6]; - //mouseReport.y = 127 max -127 min - currentReport.y = (int8_t) uart_data[7]; - //mouseReport.v = 127 max -127 min (scroll vertical) - currentReport.v = (int8_t) uart_data[8]; - //mouseReport.h = 127 max -127 min (scroll horizontal) - currentReport.h = (int8_t) uart_data[9]; - */ - /* - currentReport.x = 0; - currentReport.y = 0; - currentReport.v = 0; - currentReport.h = 0;*/ - - pointing_device_set_report(currentReport); - } else { - xprintf("\r\nRequested packet, data 3 was %d",uart_data[3]); - } - - matrix_scan_quantum(); - return 1; -} - -inline -bool matrix_is_on(uint8_t row, uint8_t col) -{ - return (matrix[row] & ((matrix_row_t)1<col)); -} - -inline -matrix_row_t matrix_get_row(uint8_t row) -{ - return matrix[row]; -} - -void matrix_print(void) -{ - print_matrix_header(); - - for (uint8_t row = 0; row < MATRIX_ROWS; row++) { - print_hex8(row); print(": "); - print_matrix_row(row); - print("\n"); - } -} |