9 files changed, 8 insertions, 27 deletions
diff --git a/keyboards/keychron/q8/ansi/info.json b/keyboards/keychron/q8/ansi/info.json
index 160672b62a..b80cb42432 100644
--- a/keyboards/keychron/q8/ansi/info.json
+++ b/keyboards/keychron/q8/ansi/info.json
@@ -8,6 +8,8 @@
         "pid": "0x0180",
         "device_version": "1.0.0"
     },
+    "processor": "STM32L432",
+    "bootloader": "stm32-dfu",
     "layouts": {
         "LAYOUT_ansi_69": {
             "layout": [
diff --git a/keyboards/keychron/q8/ansi/rules.mk b/keyboards/keychron/q8/ansi/rules.mk
index f5327cf417..345807d824 100644
--- a/keyboards/keychron/q8/ansi/rules.mk
+++ b/keyboards/keychron/q8/ansi/rules.mk
@@ -1,9 +1,3 @@
-# MCU name
-MCU = STM32L432
-
-# Bootloader selection
-BOOTLOADER = stm32-dfu
-
 # Build Options
 #   change yes to no to disable
 #
diff --git a/keyboards/keychron/q8/ansi_encoder/info.json b/keyboards/keychron/q8/ansi_encoder/info.json
index d0f84747d9..3859c19dee 100644
--- a/keyboards/keychron/q8/ansi_encoder/info.json
+++ b/keyboards/keychron/q8/ansi_encoder/info.json
@@ -8,6 +8,8 @@
         "pid": "0x0181",
         "device_version": "1.0.0"
     },
+    "processor": "STM32L432",
+    "bootloader": "stm32-dfu",
     "layouts": {
         "LAYOUT_ansi_69": {
             "layout": [
diff --git a/keyboards/keychron/q8/ansi_encoder/rules.mk b/keyboards/keychron/q8/ansi_encoder/rules.mk
index 7d43a461e7..d0d74a11b5 100644
--- a/keyboards/keychron/q8/ansi_encoder/rules.mk
+++ b/keyboards/keychron/q8/ansi_encoder/rules.mk
@@ -1,9 +1,3 @@
-# MCU name
-MCU = STM32L432
-
-# Bootloader selection
-BOOTLOADER = stm32-dfu
-
 # Build Options
 #   change yes to no to disable
 #
diff --git a/keyboards/keychron/q8/config.h b/keyboards/keychron/q8/config.h
index 4498f7d461..befe8bc94a 100644
--- a/keyboards/keychron/q8/config.h
+++ b/keyboards/keychron/q8/config.h
@@ -32,9 +32,6 @@
 /* If PH3 used with a stronger pull resistor then the following definition needs be included */
 // #define MATRIX_UNSELECT_DRIVE_HIGH
 
-/* Set 0 if debouncing isn't needed */
-#define DEBOUNCE 5
-
 /* RGB Matrix Driver Configuration */
 #define DRIVER_COUNT 2
 #define DRIVER_ADDR_1 0b1110111
diff --git a/keyboards/keychron/q8/iso/info.json b/keyboards/keychron/q8/iso/info.json
index 36c3320b5c..c5a5b7653e 100644
--- a/keyboards/keychron/q8/iso/info.json
+++ b/keyboards/keychron/q8/iso/info.json
@@ -8,6 +8,8 @@
         "pid": "0x0182",
         "device_version": "1.0.0"
     },
+    "processor": "STM32L432",
+    "bootloader": "stm32-dfu",
     "layouts": {
         "LAYOUT_iso_70": {
             "layout": [
diff --git a/keyboards/keychron/q8/iso/rules.mk b/keyboards/keychron/q8/iso/rules.mk
index f5327cf417..345807d824 100644
--- a/keyboards/keychron/q8/iso/rules.mk
+++ b/keyboards/keychron/q8/iso/rules.mk
@@ -1,9 +1,3 @@
-# MCU name
-MCU = STM32L432
-
-# Bootloader selection
-BOOTLOADER = stm32-dfu
-
 # Build Options
 #   change yes to no to disable
 #
diff --git a/keyboards/keychron/q8/iso_encoder/info.json b/keyboards/keychron/q8/iso_encoder/info.json
index 6e35bedf29..48a32c915c 100644
--- a/keyboards/keychron/q8/iso_encoder/info.json
+++ b/keyboards/keychron/q8/iso_encoder/info.json
@@ -8,6 +8,8 @@
         "pid": "0x0183",
         "device_version": "1.0.0"
     },
+    "processor": "STM32L432",
+    "bootloader": "stm32-dfu",
     "layouts": {
         "LAYOUT_iso_70": {
             "layout": [
diff --git a/keyboards/keychron/q8/iso_encoder/rules.mk b/keyboards/keychron/q8/iso_encoder/rules.mk
index 8448f47326..5240004b8c 100644
--- a/keyboards/keychron/q8/iso_encoder/rules.mk
+++ b/keyboards/keychron/q8/iso_encoder/rules.mk
@@ -1,9 +1,3 @@
-# MCU name
-MCU = STM32L432
-
-# Bootloader selection
-BOOTLOADER = stm32-dfu
-
 # Build Options
 #   change yes to no to disable
 #