diff options
Diffstat (limited to 'keyboards/keychron/bluetooth/ckbt51.h')
| -rw-r--r-- | keyboards/keychron/bluetooth/ckbt51.h | 156 |
1 files changed, 156 insertions, 0 deletions
diff --git a/keyboards/keychron/bluetooth/ckbt51.h b/keyboards/keychron/bluetooth/ckbt51.h new file mode 100644 index 0000000000..0992aea01f --- /dev/null +++ b/keyboards/keychron/bluetooth/ckbt51.h @@ -0,0 +1,156 @@ +/* Copyright 2021 @ Keychron (https://www.keychron.com) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +#include "stdint.h" + +#ifdef BT_DRIVER_UART_BANK +# define BT_DRIVER_UART_TX_BANK BT_DRIVER_UART_BANK +# define BT_DRIVER_UART_RX_BANK BT_DRIVER_UART_BANK +#endif + +#ifndef BT_DRIVER_UART_TX_BANK +# define BT_DRIVER_UART_TX_BANK GPIOA +#endif + +#ifndef BT_DRIVER_UART_RX_BANK +# define BT_DRIVER_UART_RX_BANK GPIOA +#endif + +#ifndef BT_DRIVER_UART_TX +# define BT_DRIVER_UART_TX 2 +#endif + +#ifndef BT_DRIVER_UART_RX +# define BT_DRIVER_UART_RX 3 +#endif + +#ifndef BT_DRIVER +# define BT_DRIVER SD2 +#endif + +#ifdef USE_GPIOV1 +# ifndef BT_DRIVER_UART_TX_PAL_MODE +# define BT_DRIVER_UART_TX_PAL_MODE PAL_MODE_STM32_ALTERNATE_PUSHPULL +# endif +# ifndef BT_DRIVER_UART_RX_PAL_MODE +# define BT_DRIVER_UART_RX_PAL_MODE PAL_MODE_STM32_ALTERNATE_PUSHPULL +# endif +#else +// The default PAL alternate modes are used to signal that the pins are used for I2C +# ifndef BT_DRIVER_UART_TX_PAL_MODE +# define BT_DRIVER_UART_TX_PAL_MODE 7 +# endif +# ifndef BT_DRIVER_UART_RX_PAL_MODE +# define BT_DRIVER_UART_RX_PAL_MODE 7 +# endif +#endif + +// Error checking +#if !STM32_SERIAL_USE_USART1 && !STM32_SERIAL_USE_USART2 && !STM32_SERIAL_USE_USART3 && !STM32_SERIAL_USE_UART4 && !STM32_SERIAL_USE_UART5 && !STM32_SERIAL_USE_USART6 && !STM32_SERIAL_USE_UART7 && !STM32_SERIAL_USE_UART8 && !STM32_SERIAL_USE_LPUART1 +# error "BT driver activated but no USART/UART peripheral assigned" +#endif + +#define PACKECT_HEADER_LEN 5 +#define BDA_LEN 6 +#define PACKET_MAX_LEN 64 + +enum { + PAIRING_MODE_DEFAULT = 0x00, + PAIRING_MODE_JUST_WORK, + PAIRING_MODE_PASSKEY_ENTRY, + PAIRING_MODE_LESC_OR_SSP, + PAIRING_MODE_INVALID +}; + +enum { + BT_MODE_DEFAUL, + BT_MODE_CLASSIC, + BT_MODE_LE, // Note: CKBT51 doesn't support BLE + BT_MODE_INVALID, +}; + +typedef struct { + uint8_t hostIndex; + uint16_t timeout; /* Pairing timeout, valid value range from 30 to 3600 seconds, 0 for default */ + uint8_t pairingMode; /* 0: default, 1: Just Works, 2: Passkey Entry */ + uint8_t BRorLE; /* Only available for dual mode module. Keep 0 for single mode module */ + uint8_t txPower; /* Only available for BLE module */ + const char* leName; /* Only available for BLE module */ +} pairing_param_t; + +typedef struct { + uint8_t type; + uint16_t full_votage; + uint16_t empty_voltage; + uint16_t shutdown_voltage; +} battery_param_t; + +typedef struct { + uint8_t model_name[11]; + uint8_t mode; + uint8_t bluetooth_version; + uint8_t firmware_version[11]; + uint8_t hardware_version[11]; + uint16_t cmd_set_verson; +} __attribute__((packed)) module_info_t; + +typedef struct { + uint8_t event_mode; /* Must be 0x02 */ + uint16_t connected_idle_timeout; + uint16_t pairing_timeout; /* Range: 30 ~ 3600 second, 0 for default */ + uint8_t pairing_mode; /* 0: default, 1: Just Works, 2: Passkey Entry */ + uint16_t reconnect_timeout; /* 0: default, 0xFF: Unlimited time, 2 ~ 254 seconds */ + uint8_t report_rate; /* 90 or 133 */ + uint8_t rsvd1; + uint8_t rsvd2; + uint8_t vendor_id_source; /* 0: From Bluetooth SIG, 1: From USB-IF */ + uint16_t verndor_id; /* No effect, the vendor ID is 0x3434 */ + uint16_t product_id; + /* Below parametes is only available for BLE module */ + uint16_t le_connection_interval_min; + uint16_t le_connection_interval_max; + uint16_t le_connection_interval_timeout; +} __attribute__((packed)) module_param_t; + +void ckbt51_init(bool wakeup_from_low_power_mode); +void ckbt51_send_cmd(uint8_t* payload, uint8_t len, bool ack_enable); + +void ckbt51_send_keyboard(uint8_t* report); +void ckbt51_send_nkro(uint8_t* report); +void ckbt51_send_consumer(uint16_t report); +void ckbt51_send_system(uint16_t report); +void ckbt51_send_mouse(uint8_t* report); + +void ckbt51_become_discoverable(uint8_t host_idx, void* param); +void ckbt51_connect(uint8_t hostIndex, uint16_t timeout); +void ckbt51_disconnect(void); +void ckbt51_switch_host(uint8_t hostIndex); +void ckbt51_read_state_reg(uint8_t reg, uint8_t len); + +void ckbt51_get_info(module_info_t* info); +void ckbt51_set_param(module_param_t* param); +void ckbt51_get_param(module_param_t* param); +void ckbt51_set_local_name(const char* name); +void ckbt51_get_local_name(char* name); + +void ckbt51_factory_reset(void); +void ckbt51_int_pin_test(bool enable); +void ckbt51_dfu_rx(uint8_t* data, uint8_t length); + +void ckbt51_task(void); + |