1 files changed, 0 insertions, 78 deletions
diff --git a/keyboards/keycapsss/plaid_pad/readme.md b/keyboards/keycapsss/plaid_pad/readme.md
deleted file mode 100644
index 7afebba5aa..0000000000
--- a/keyboards/keycapsss/plaid_pad/readme.md
+++ /dev/null
@@ -1,78 +0,0 @@
-# Plaid-Pad
-Rev1.1
-<img src="https://i.imgur.com/Jovhxpr.jpg" width="400" alt="Plaid-Pad Rev1.1">
-Rev3
-<img src="https://i.imgur.com/KHPId3G.jpg" width="400" alt="Plaid-Pad Rev3 with Oled">  
-
-Default Keymap
-<img src="https://i.imgur.com/V82cMqq.png" width="400">
-
-A 4x4 numpad/macro pad with only through hole components. It supports up to 4 rotary encoder. The positions for the encoder are interchangeable with keyboard switches.  
-
-Below you can see the possible positions for the 4 rotary encoder (Rev1 only 2).  
-*If you place a encoder in the top left corner (E1), you can't use another encoder in the lower right corner.*
-```
-Rev1.1 and higher           Rev1
-,-----------------------,   ,-----------------------,
-|  E1 |  E2 |  E3 |  E4 |   |  E1 |     |     |  E2 |
-|-----+-----+-----+-----|   |-----+-----+-----+-----|
-|     |     |     |  E3 |   |     |     |     |     |
-|-----+-----+-----+-----|   |-----+-----+-----+-----|
-|     |     |     |  E2 |   |     |     |     |     |
-|-----+-----+-----+-----|   |-----+-----+-----+-----|
-|     |     |     |  E1 |   |     |     |     |     |
-`-----------------------'   `-----------------------'
-```  
-
-- Encoder E1 performs a tap on `KC_F17` and `KC_F18`.
-- Encoder E2 performs a tap on `KC_F19` and `KC_F20`.
-- Encoder E3 performs a tap on `KC_F21` and `KC_F22`.
-- Encoder E4 performs a tap on `KC_F23` and `KC_F24`.
-
-*The F17-F24 keys are intended to be customized via [Karabiner-Elements (OSX)](https://github.com/pqrs-org/Karabiner-Elements), or [AutoHotkey](https://github.com/Lexikos/AutoHotkey_L) (WIN)*
-
-It's a great companion to the Plaid keyboard by [hsgw](https://github.com/hsgw/) and heavily inspired by it.
-* Keyboard Maintainer: BenRoe [GitHub](https://github.com/BenRoe) / [Twitter](https://twitter.com/keycapsss)
-* Hardware Supported: ATmega328P with VUSB ([see Bootloader section](#Bootloader))
-* Hardware Availability: [Keycapsss.com](https://keycapsss.com)
-
-## QMK Firmware
-_Bootloader and Firmware ([default keymap](https://github.com/qmk/qmk_firmware/tree/master/keyboards/keycapsss/plaid_pad)) are already on the ATmega328P chip._
-
-Make example for this keyboard (after [setting up your build environment](https://docs.qmk.fm/#/getting_started_build_tools)):
-
-    make keycapsss/plaid_pad:default
-    // or
-    qmk compile -kb keycapsss/plaid_pad -km default
-
-Flashing example for this keyboard:
-
-    make keycapsss/plaid_pad:default:flash
-    // or
-    qmk flash -kb keycapsss/plaid_pad -km default
-
-See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
-
-## Bootloader
-- same `usbasploader` as used for Plaid ([Instructions](https://github.com/hsgw/plaid/blob/master/doc/en/bootloader.md), [Repository](https://github.com/hsgw/USBaspLoader/tree/plaid))
-
-### Enter bootloader mode (to flash a new firmware)
-- Plug in the USB cable
-- Push and hold RESET switch
-- Push and hold BOOT switch
-- Release RESET switch
-- Release BOOT switch
-
-alternative method:
-- Unplug the USB cable
-- Hold down the BOOT switch
-- Plug in the USB cable
-- Release the BOOT switch
-
-alternative method ([Bootmagic Lite](https://docs.qmk.fm/#/feature_bootmagic?id=bootmagic-lite)):
-- Unplug the USB cable
-- Hold down the most top left key
-- Plug in the USB cable
-- Release the most top left key
-
-If you succeed to enter bootloader mode, you can see usbasp in device manager, or `*** USBAsp device connected ...` in [QMK Toolbox](https://github.com/qmk/qmk_toolbox).