diff options
Diffstat (limited to 'keyboards/keycapsss/o4l_5x12/config.h')
| -rw-r--r-- | keyboards/keycapsss/o4l_5x12/config.h | 115 |
1 files changed, 98 insertions, 17 deletions
diff --git a/keyboards/keycapsss/o4l_5x12/config.h b/keyboards/keycapsss/o4l_5x12/config.h index 67bde35cf2..e24275160f 100644 --- a/keyboards/keycapsss/o4l_5x12/config.h +++ b/keyboards/keycapsss/o4l_5x12/config.h @@ -3,41 +3,122 @@ #include "config_common.h" /* USB Device descriptor parameter */ -#define VENDOR_ID 0x7983 -#define PRODUCT_ID 0x0512 -#define DEVICE_VER 0x0001 -#define MANUFACTURER Keycapsss -#define PRODUCT O4L:5x12 -#define DESCRIPTION A 60 key ortholinear keyboard +#define VENDOR_ID 0x7983 +#define PRODUCT_ID 0x0512 +#define DEVICE_VER 0x0001 +#define MANUFACTURER Keycapsss +#define PRODUCT O4L:5x12 /* key matrix size */ #define MATRIX_ROWS 5 #define MATRIX_COLS 12 -/* key matrix pins */ +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * + */ #define MATRIX_ROW_PINS { F7, B1, B3, B2, B6 } #define MATRIX_COL_PINS { B5, B4, E6, D7, C6, D4, D0, D1, D2, F6, F5, F4 } #define UNUSED_PINS -/* COL2ROW or ROW2COL */ +/* COL2ROW, ROW2COL */ #define DIODE_DIRECTION COL2ROW -/* WS2812 RGB LED */ -#define RGB_DI_PIN D3 +//#define BACKLIGHT_PIN B7 +//#define BACKLIGHT_LEVELS 3 +//#define BACKLIGHT_BREATHING +#define RGB_DI_PIN D3 #ifdef RGB_DI_PIN -#define RGBLIGHT_ANIMATIONS -#define RGBLED_NUM 12 // Number of LEDs -#define RGBLIGHT_HUE_STEP 4 -#define RGBLIGHT_SAT_STEP 4 -#define RGBLIGHT_VAL_STEP 4 +# define RGBLED_NUM 12 +# define RGBLIGHT_HUE_STEP 4 +# define RGBLIGHT_SAT_STEP 4 +# define RGBLIGHT_VAL_STEP 4 +//# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ +//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ +/*== all animations enable ==*/ +# define RGBLIGHT_ANIMATIONS +/*== or choose animations ==*/ +//# define RGBLIGHT_EFFECT_BREATHING +//# define RGBLIGHT_EFFECT_RAINBOW_MOOD +//# define RGBLIGHT_EFFECT_RAINBOW_SWIRL +//# define RGBLIGHT_EFFECT_SNAKE +//# define RGBLIGHT_EFFECT_KNIGHT +//# define RGBLIGHT_EFFECT_CHRISTMAS +//# define RGBLIGHT_EFFECT_STATIC_GRADIENT +//# define RGBLIGHT_EFFECT_RGB_TEST +//# define RGBLIGHT_EFFECT_ALTERNATING +/*== customize breathing effect ==*/ +/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/ +//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64 +/*==== use exp() and sin() ====*/ +//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7 +//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 #endif -/* Set 0 if debouncing isn't needed */ +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ #define DEBOUNCE 5 +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE - /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE + +/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. + * This is useful for the Windows task manager shortcut (ctrl+shift+esc). + */ +//#define GRAVE_ESC_CTRL_OVERRIDE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT + +/* disable these deprecated features by default */ +#define NO_ACTION_MACRO +#define NO_ACTION_FUNCTION + +/* Bootmagic Lite key configuration */ +//#define BOOTMAGIC_LITE_ROW 0 +//#define BOOTMAGIC_LITE_COLUMN 0 |