1 files changed, 91 insertions, 0 deletions
diff --git a/keyboards/keebio/iris/rev6/config.h b/keyboards/keebio/iris/rev6/config.h
new file mode 100644
index 0000000000..e821012a7d
--- /dev/null
+++ b/keyboards/keebio/iris/rev6/config.h
@@ -0,0 +1,91 @@
+/*
+Copyright 2021 Danny Nguyen <danny@keeb.io>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xCB10
+#define PRODUCT_ID      0x6256
+#define DEVICE_VER      0x0600
+#define MANUFACTURER    Keebio
+#define PRODUCT         Iris Rev. 6
+
+/* key matrix size */
+// Rows are doubled-up
+#define MATRIX_ROWS 10
+#define MATRIX_COLS 6
+
+// wiring of each half
+#define MATRIX_ROW_PINS { B1, F0, F5, B4, D7 }
+#define MATRIX_COL_PINS { F1, F4, B5, C7, D4, D6 }
+#define MATRIX_ROW_PINS_RIGHT { B1, F0, F5, B4, B5 }
+#define MATRIX_COL_PINS_RIGHT { D4, D6, D7, C7, F1, F4 }
+#define SPLIT_HAND_PIN D5
+
+#define ENCODERS_PAD_A { B2 }
+#define ENCODERS_PAD_B { B3 }
+#define ENCODERS_PAD_A_RIGHT { B2 }
+#define ENCODERS_PAD_B_RIGHT { B3 }
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+// #define BACKLIGHT_LEVELS 3
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCE 5
+
+/* serial.c configuration for split keyboard */
+#define SOFT_SERIAL_PIN D0
+
+/* ws2812 RGB LED */
+#define RGB_DI_PIN E6
+#ifdef RGB_DI_PIN
+#    define RGBLED_NUM 68
+#    define RGBLED_SPLIT { 34, 34 }
+#    define RGBLIGHT_HUE_STEP 8
+#    define RGBLIGHT_SAT_STEP 8
+#    define RGBLIGHT_VAL_STEP 8
+#    define RGBLIGHT_LIMIT_VAL 120 /* The maximum brightness level */
+#    define RGBLIGHT_SLEEP         /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+/*== enabled animations ==*/
+#    define RGBLIGHT_EFFECT_BREATHING
+#    define RGBLIGHT_EFFECT_RAINBOW_MOOD
+#    define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+#    define RGBLIGHT_EFFECT_SNAKE
+#    define RGBLIGHT_EFFECT_KNIGHT
+#    define RGBLIGHT_EFFECT_CHRISTMAS
+#    define RGBLIGHT_EFFECT_STATIC_GRADIENT
+#    define RGBLIGHT_EFFECT_RGB_TEST
+#    define RGBLIGHT_EFFECT_ALTERNATING
+#    define RGBLIGHT_EFFECT_TWINKLE
+#    define RGBLIGHT_DEFAULT_VAL 120
+#    define RGBLIGHT_DEFAULT_MODE (RGBLIGHT_MODE_RAINBOW_SWIRL + 2)
+// RGB Matrix
+#    ifdef RGB_MATRIX_ENABLE
+#        define RGB_MATRIX_MAXIMUM_BRIGHTNESS 160
+#        define RGB_MATRIX_STARTUP_VAL RGB_MATRIX_MAXIMUM_BRIGHTNESS
+#        define DRIVER_LED_TOTAL RGBLED_NUM
+#        define RGB_MATRIX_SPLIT { 34, 34 }
+#        define RGB_DISABLE_WHEN_USB_SUSPENDED
+//#        define RGB_MATRIX_KEYPRESSES
+#    endif
+#endif