summaryrefslogtreecommitdiffstats
path: root/keyboards/kakunpc/suihankey/rev1
diff options
context:
space:
mode:
Diffstat (limited to 'keyboards/kakunpc/suihankey/rev1')
-rw-r--r--keyboards/kakunpc/suihankey/rev1/config.h47
-rw-r--r--keyboards/kakunpc/suihankey/rev1/info.json2
-rw-r--r--keyboards/kakunpc/suihankey/rev1/keymaps/default/keymap.c7
3 files changed, 6 insertions, 50 deletions
diff --git a/keyboards/kakunpc/suihankey/rev1/config.h b/keyboards/kakunpc/suihankey/rev1/config.h
index d24e9b7dbb..1dfc7fc37b 100644
--- a/keyboards/kakunpc/suihankey/rev1/config.h
+++ b/keyboards/kakunpc/suihankey/rev1/config.h
@@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-#include "config_common.h"
/* key matrix size */
#define MATRIX_ROWS 5
@@ -39,16 +38,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
/* COL2ROW, ROW2COL*/
#define DIODE_DIRECTION COL2ROW
-/*
- * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
- */
-#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
-#define SPLIT_HAND_PIN D2
-
-// #define BACKLIGHT_PIN B7
-// #define BACKLIGHT_BREATHING
-// #define BACKLIGHT_LEVELS 3
-
#define RGB_DI_PIN D3
#ifdef RGB_DI_PIN
#define RGBLED_NUM 18
@@ -69,43 +58,11 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_EFFECT_TWINKLE
#endif
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-// #define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
/*
* Feature disable options
* These options are also useful to firmware size reduction.
@@ -122,8 +79,4 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
-/* Bootmagic Lite key configuration */
-// #define BOOTMAGIC_LITE_ROW 0
-// #define BOOTMAGIC_LITE_COLUMN 0
-
// #define RGBLED_SPLIT {18,18}
diff --git a/keyboards/kakunpc/suihankey/rev1/info.json b/keyboards/kakunpc/suihankey/rev1/info.json
index 299c847aab..76c31631ff 100644
--- a/keyboards/kakunpc/suihankey/rev1/info.json
+++ b/keyboards/kakunpc/suihankey/rev1/info.json
@@ -8,6 +8,8 @@
"pid": "0x0000",
"device_version": "0.0.1"
},
+ "processor": "atmega32u4",
+ "bootloader": "atmel-dfu",
"layouts": {
"LAYOUT": {
"layout": [
diff --git a/keyboards/kakunpc/suihankey/rev1/keymaps/default/keymap.c b/keyboards/kakunpc/suihankey/rev1/keymaps/default/keymap.c
index b581c54a08..339a7895cf 100644
--- a/keyboards/kakunpc/suihankey/rev1/keymaps/default/keymap.c
+++ b/keyboards/kakunpc/suihankey/rev1/keymaps/default/keymap.c
@@ -77,9 +77,10 @@ bool oled_task_user(void) {
}
// Host Keyboard LED Status
- oled_write_P(IS_HOST_LED_ON(USB_LED_NUM_LOCK) ? PSTR("NUMLCK ") : PSTR(" "), false);
- oled_write_P(IS_HOST_LED_ON(USB_LED_CAPS_LOCK) ? PSTR("CAPLCK ") : PSTR(" "), false);
- oled_write_P(IS_HOST_LED_ON(USB_LED_SCROLL_LOCK) ? PSTR("SCRLCK ") : PSTR(" "), false);
+ led_t led_state = host_keyboard_led_state();
+ oled_write_P(led_state.num_lock ? PSTR("NUMLCK ") : PSTR(" "), false);
+ oled_write_P(led_state.caps_lock ? PSTR("CAPLCK ") : PSTR(" "), false);
+ oled_write_P(led_state.scroll_lock ? PSTR("SCRLCK ") : PSTR(" "), false);
return false;
}