diff options
Diffstat (limited to 'keyboards/kakunpc/business_card')
| -rw-r--r-- | keyboards/kakunpc/business_card/alpha/config.h | 29 | ||||
| -rw-r--r-- | keyboards/kakunpc/business_card/beta/config.h | 29 |
2 files changed, 0 insertions, 58 deletions
diff --git a/keyboards/kakunpc/business_card/alpha/config.h b/keyboards/kakunpc/business_card/alpha/config.h index afc05e4048..ea5caa4948 100644 --- a/keyboards/kakunpc/business_card/alpha/config.h +++ b/keyboards/kakunpc/business_card/alpha/config.h @@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" /* key matrix size */ #define MATRIX_ROWS 2 @@ -44,10 +43,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. */ #define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 -// #define BACKLIGHT_PIN B7 -// #define BACKLIGHT_BREATHING -// #define BACKLIGHT_LEVELS 3 - #define RGB_DI_PIN D3 #ifdef RGB_DI_PIN #define RGBLED_NUM 6 @@ -61,9 +56,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ #define DEBOUNCE 5 -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ @@ -75,27 +67,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. // #define GRAVE_ESC_CTRL_OVERRIDE /* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - -/* * Feature disable options * These options are also useful to firmware size reduction. */ diff --git a/keyboards/kakunpc/business_card/beta/config.h b/keyboards/kakunpc/business_card/beta/config.h index a9466074a8..3bcc520dad 100644 --- a/keyboards/kakunpc/business_card/beta/config.h +++ b/keyboards/kakunpc/business_card/beta/config.h @@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" /* key matrix size */ #define MATRIX_ROWS 3 @@ -44,10 +43,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. */ #define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 -// #define BACKLIGHT_PIN B7 -// #define BACKLIGHT_BREATHING -// #define BACKLIGHT_LEVELS 3 - #define RGB_DI_PIN D3 #ifdef RGB_DI_PIN #define RGBLED_NUM 6 @@ -61,9 +56,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ #define DEBOUNCE 5 -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ @@ -75,27 +67,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. // #define GRAVE_ESC_CTRL_OVERRIDE /* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - -/* * Feature disable options * These options are also useful to firmware size reduction. */ |