diff options
Diffstat (limited to 'keyboards/jj4x4/README.md')
| -rw-r--r-- | keyboards/jj4x4/README.md | 71 |
1 files changed, 71 insertions, 0 deletions
diff --git a/keyboards/jj4x4/README.md b/keyboards/jj4x4/README.md new file mode 100644 index 0000000000..09684bd825 --- /dev/null +++ b/keyboards/jj4x4/README.md @@ -0,0 +1,71 @@ +# jj4x4 + + + +A 4x4 keypad kit made and KPRepublic on AliExpress. This is a chopped off version of the jj40 with rearranged keys. + +Keyboard Maintainer: [QMK Community](https://github.com/qmk) +Hardware Supported: Atmega32A +Hardware Availability: [AliExpress](https://www.aliexpress.com/item/jj4x4-jj4X4-16-keys-Custom-Mechanical-Keyboard-PCB-programmed-numpad-layouts-bface-firmware-with-rgb-bottom/32901955446.html?spm=2114.search0104.3.7.3ebf431ae1d9ic&ws_ab_test=searchweb0_0,searchweb201602_4_10065_10130_10068_10547_319_317_10548_10545_10696_453_10084_454_10083_433_10618_431_10307_537_536_10902_10059_10884_10887_321_322_10103,searchweb201603_6,ppcSwitch_0&algo_expid=9d1891dd-80af-4793-a889-5a62e1fdfdd8-1&algo_pvid=9d1891dd-80af-4793-a889-5a62e1fdfdd8&transAbTest=ae803_5) + +Make example for this keyboard (after setting up your build environment): + + make jj4x4:default:program + +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. + +Note that this is a complete replacement for the firmware, so you won't be +using Bootmapper Client to change any keyboard settings, since not all the +USB report options are supported. + +In addition you may need the AVR toolchain and `bootloadHID` ([GitHub repo](https://github.com/whiteneon/bootloadHID)) for flashing: + +For macOS: +``` +$ brew cask install crosspack-avr +$ brew install --HEAD https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb +``` + +For Linux: +``` +$ sudo apt install libusb-dev +$ wget https://www.obdev.at/downloads/vusb/bootloadHID.2012-12-08.tar.gz +$ tar -xzf bootloadHID.2012-12-08.tar.gz +$ cd bootloadHID.2012-12-08/commandline +$ make +$ sudo cp bootloadHID /usr/bin +``` + +In order to use the `./program` script, which can reboot the board into +the bootloader, you'll need Python 2 with PyUSB installed: + +``` +$ pip install pyusb +``` + +If you prefer (or are having issues with a `program` flash), you can just build it (`make jj40:<keymap-name>` and flash the firmware (`.hex` file) directly with +`bootloadHID` if you boot the board while holding down `8` (second from top, second from left, with usb plug is at the top) to keep it +in the bootloader: + +``` +$ make jj40 +$ bootloadHID -r jj4x4_default.hex +``` + +For Windows 10: +Windows sometimes doesn't recognize the jj4x4. The easiest way of flashing a new layout is probably using [HIDBootFlash](http://vusb.wikidot.com/project:hidbootflash). +1. Go to Windows Device Manager and find the keyboard (plug it in while holding down `8` (second from top, second from left, with usb plug is at the top)). It can be found under Human Interface Devices or under Keyboards. +2. Go to properties and the Details tab to find the hardware ID. You want the VID and the PID (code after the underscore). Plug them into HIDBootFlash and hit Find Device. +3. Use `make jj4x4:<keymap-name>` to generate the .hex file in the qmk basis folder. Select the .hex file in HIDBootFlash and press Flash Device. + + +## Troubleshooting + +1. Try plugging the board in while pressing `8` (usb plug at top, second from top, second from left). This will force it + to boot only the bootloader without loading the firmware. Once this is + done, just reflash the board with the original firmware. +2. Sometimes USB hubs can act weird, so try connecting the board directly + to your computer or plugging/unplugging the USB hub. +3. If you get an error such as "Resource Unavailable" when attemting to flash + on Linux, you may want to compile and run `tools/usb_detach.c`. See `tools/README.md` + for more info. |