diff options
Diffstat (limited to 'keyboards/jj4x4/README.md')
| -rw-r--r-- | keyboards/jj4x4/README.md | 68 |
1 files changed, 9 insertions, 59 deletions
diff --git a/keyboards/jj4x4/README.md b/keyboards/jj4x4/README.md index 29dc2605de..a7c93c930f 100644 --- a/keyboards/jj4x4/README.md +++ b/keyboards/jj4x4/README.md @@ -2,70 +2,20 @@  -A 4x4 keypad kit made and KPRepublic on AliExpress. This is a chopped off version of the jj40 with rearranged keys. +A 4x4 keypad kit made and KPRepublic on AliExpress. This is a chopped off version of the jj40 with rearranged keys. -Keyboard Maintainer: [QMK Community](https://github.com/qmk) -Hardware Supported: Atmega32A -Hardware Availability: [AliExpress](https://www.aliexpress.com/item/jj4x4-jj4X4-16-keys-Custom-Mechanical-Keyboard-PCB-programmed-numpad-layouts-bface-firmware-with-rgb-bottom/32901955446.html?spm=2114.search0104.3.7.3ebf431ae1d9ic&ws_ab_test=searchweb0_0,searchweb201602_4_10065_10130_10068_10547_319_317_10548_10545_10696_453_10084_454_10083_433_10618_431_10307_537_536_10902_10059_10884_10887_321_322_10103,searchweb201603_6,ppcSwitch_0&algo_expid=9d1891dd-80af-4793-a889-5a62e1fdfdd8-1&algo_pvid=9d1891dd-80af-4793-a889-5a62e1fdfdd8&transAbTest=ae803_5) +* Keyboard Maintainer: [QMK Community](https://github.com/qmk) +* Hardware Supported: Atmega32A +* Hardware Availability: [AliExpress](https://www.aliexpress.com/item/jj4x4-jj4X4-16-keys-Custom-Mechanical-Keyboard-PCB-programmed-numpad-layouts-bface-firmware-with-rgb-bottom/32901955446.html) Make example for this keyboard (after setting up your build environment): - make jj4x4:default:program + make jj4x4:default -See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. +Flashing example for this keyboard ([after setting up the bootloadHID flashing environment](https://docs.qmk.fm/#/flashing_bootloadhid)) -Note that this is a complete replacement for the firmware, so you won't be -using Bootmapper Client to change any keyboard settings, since not all the -USB report options are supported. + make jj4x4:default:flash -In addition you may need the AVR toolchain and `bootloadHID` ([GitHub repo](https://github.com/whiteneon/bootloadHID)) for flashing: +**Reset Key**: Hold down the key located at *K00*, commonly programmed as *8* while plugging in the keyboard. -For macOS: -``` -$ brew cask install crosspack-avr -$ brew install --HEAD https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb -``` - -For Linux: -``` -$ sudo apt install libusb-dev -$ wget https://www.obdev.at/downloads/vusb/bootloadHID.2012-12-08.tar.gz -$ tar -xzf bootloadHID.2012-12-08.tar.gz -$ cd bootloadHID.2012-12-08/commandline -$ make -$ sudo cp bootloadHID /usr/bin -``` - -In order to use the `./util/atmega32a_program.py` script, which can reboot the board into -the bootloader, you'll need Python 2 with PyUSB installed: - -``` -$ pip install pyusb -``` - -If you prefer (or are having issues with a `program` flash), you can just build it (`make jj40:<keymap-name>` and flash the firmware (`.hex` file) directly with -`bootloadHID` if you boot the board while holding down `8` (second from top, second from left, with usb plug is at the top) to keep it -in the bootloader: - -``` -$ make jj40 -$ bootloadHID -r jj4x4_default.hex -``` - -For Windows 10: -Windows sometimes doesn't recognize the jj4x4. The easiest way of flashing a new layout is probably using [HIDBootFlash](http://vusb.wikidot.com/project:hidbootflash). -1. Go to Windows Device Manager and find the keyboard (plug it in while holding down `8` (second from top, second from left, with usb plug is at the top)). It can be found under Human Interface Devices or under Keyboards. -2. Go to properties and the Details tab to find the hardware ID. You want the VID and the PID (code after the underscore). Plug them into HIDBootFlash and hit Find Device. -3. Use `make jj4x4:<keymap-name>` to generate the .hex file in the qmk basis folder. Select the .hex file in HIDBootFlash and press Flash Device. - - -## Troubleshooting - -1. Try plugging the board in while pressing `8` (usb plug at top, second from top, second from left). This will force it - to boot only the bootloader without loading the firmware. Once this is - done, just reflash the board with the original firmware. -2. Sometimes USB hubs can act weird, so try connecting the board directly - to your computer or plugging/unplugging the USB hub. -3. If you get an error such as "Resource Unavailable" when attemting to flash - on Linux, you may want to compile and run `tools/usb_detach.c`. See `tools/README.md` - for more info. +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). |