diff options
Diffstat (limited to 'keyboards/jian/rev2/config.h')
| -rw-r--r-- | keyboards/jian/rev2/config.h | 136 |
1 files changed, 136 insertions, 0 deletions
diff --git a/keyboards/jian/rev2/config.h b/keyboards/jian/rev2/config.h new file mode 100644 index 0000000000..760389cc64 --- /dev/null +++ b/keyboards/jian/rev2/config.h @@ -0,0 +1,136 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> +Copyright 2015 Jack Humbert + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xC0DE +#define PRODUCT_ID 0x1337 +#define DEVICE_VER 0x0200 +#define MANUFACTURER KgOfHedgehogs +#define PRODUCT Jian +#define DESCRIPTION An ergo keyboard + +/* key matrix size */ +// Rows are doubled-up +#define MATRIX_ROWS 8 +#define MATRIX_COLS 6 +#define DIODE_DIRECTION COL2ROW + +// wiring of each half +#define MATRIX_ROW_PINS { F4, F5, B1, B3 } +#define MATRIX_COL_PINS { D3, D2, B4, F6, F7, B2 } + +//#define USE_I2C +#define USE_SERIAL +#define SOFT_SERIAL_PIN D1 + +//#define EE_HANDS +#define SPLIT_HAND_PIN E6 + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCE 5 + +#define PHYSICAL_LEDS_ENABLE +#define IOS_DEVICE_ENABLE + +#ifdef BACKLIGHT_ENABLE +#define BACKLIGHT_PIN C6 +#define BACKLIGHT_LEVELS 5 +#define BACKLIGHT_BREATHING //not working with splits right now +#define BREATHING_PERIOD 6 +#endif + +/* ws2812 RGB LED */ +#define RGB_DI_PIN D4 +#define RGBLIGHT_TIMER +#define RGBLED_NUM 7 // Number of LEDs +#define RGBLIGHT_ANIMATIONS //not working with splits right now + +#define RGBLIGHT_SLEEP +#define RGBLIGHT_SPLIT + +#ifndef IOS_DEVICE_ENABLE +#if RGBLED_NUM <= 6 +#define RGBLIGHT_LIMIT_VAL 255 +#else +#define RGBLIGHT_LIMIT_VAL 130 +#endif +#define RGBLIGHT_VAL_STEP 8 +#else +#if RGBLED_NUM <= 6 +#define RGBLIGHT_LIMIT_VAL 90 +#else +#define RGBLIGHT_LIMIT_VAL 45 +#endif +#define RGBLIGHT_VAL_STEP 4 +#endif +#define RGBLIGHT_HUE_STEP 10 +#define RGBLIGHT_SAT_STEP 17 + +#if defined(RGBLIGHT_ENABLE) && !defined(IOS_DEVICE_ENABLE) +#define USB_MAX_POWER_CONSUMPTION 400 +#else +// iOS device need lessthan 100 +#define USB_MAX_POWER_CONSUMPTION 100 +#endif + +#define NUM_LOCK_LED_PIN D7 +#define CAPS_LOCK_LED_PIN B5 +#define SCROLL_LOCK_LED_PIN B6 + +// #define NUM_NMOSFET //uncomment this if you using n-mosfet +// #define CAPS_NMOSFET //uncomment this if you using n-mosfet +// #define SCROLL_NMOSFET //uncomment this if you using n-mosfet + +// #define NUM_INVERT // uncomment this if you want to reverse logic of numlock +// This will make it light up only when lock is off +// (Doesn't work on mac. There is no num lock, so it will be always off and lit) + +#ifdef NUM_NMOSFET +#define RESET_NUM_LOCK_LED() writePinLow(NUM_LOCK_LED_PIN) +#ifdef NUM_INVERT +#define UPDATE_NUM_LOCK_LED() writePin(NUM_LOCK_LED_PIN, !led_state.num_lock) +#else +#define UPDATE_NUM_LOCK_LED() writePin(NUM_LOCK_LED_PIN, led_state.num_lock) +#endif // NUM_INVERT +#else +#define RESET_NUM_LOCK_LED() writePinHigh(NUM_LOCK_LED_PIN) +#ifdef NUM_INVERT +#define UPDATE_NUM_LOCK_LED() writePin(NUM_LOCK_LED_PIN, led_state.num_lock) +#else +#define UPDATE_NUM_LOCK_LED() writePin(NUM_LOCK_LED_PIN, !led_state.num_lock) +#endif // NUM_INVERT +#endif // NUM_NMOSFET + +#ifdef CAPS_NMOSFET +#define RESET_CAPS_LOCK_LED() writePinLow(CAPS_LOCK_LED_PIN) +#define UPDATE_CAPS_LOCK_LED() writePin(CAPS_LOCK_LED_PIN, led_state.caps_lock) +#else +#define RESET_CAPS_LOCK_LED() writePinHigh(CAPS_LOCK_LED_PIN) +#define UPDATE_CAPS_LOCK_LED() writePin(CAPS_LOCK_LED_PIN, !led_state.caps_lock) +#endif // CAPS_NMOSFET + +#ifdef SCROLL_NMOSFET +#define RESET_SCROLL_LOCK_LED() writePinLow(SCROLL_LOCK_LED_PIN) +#define UPDATE_SCROLL_LOCK_LED() writePin(SCROLL_LOCK_LED_PIN, led_state.scroll_lock) +#else +#define RESET_SCROLL_LOCK_LED() writePinHigh(SCROLL_LOCK_LED_PIN) +#define UPDATE_SCROLL_LOCK_LED() writePin(SCROLL_LOCK_LED_PIN, !led_state.scroll_lock) +#endif // SCROLL_NMOSFET |