1 files changed, 0 insertions, 121 deletions
diff --git a/keyboards/input_club/infinity60/led_controller.h b/keyboards/input_club/infinity60/led_controller.h
deleted file mode 100644
index e4b4717646..0000000000
--- a/keyboards/input_club/infinity60/led_controller.h
+++ /dev/null
@@ -1,121 +0,0 @@
-/*
-Copyright 2016 flabbergast <s3+flabbergast@sdfeu.org>
-Copyright 2017 jpetermans <tibcmhhm@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#ifndef _LED_CONTROLLER_H_
-#define _LED_CONTROLLER_H_
-
-/* =========================
- *  communication functions
- * ========================= */
-
-msg_t is31_write_data(uint8_t page, uint8_t *buffer, uint8_t size);
-msg_t is31_write_register(uint8_t page, uint8_t reg, uint8_t data);
-msg_t is31_read_register(uint8_t page, uint8_t reg, uint8_t *result);
-
-/* ============================
- *  init functions/definitions
- * ============================*/
-
-void led_controller_init(void);
-
-#define CAPS_LOCK_LED_ADDRESS 46 //pin matrix location
-#define NUM_LOCK_LED_ADDRESS 85
-
-/* =============================
- * IS31 chip related definitions
- * ============================= */
-
-#define IS31_ADDR_DEFAULT 0x74
-
-#define IS31_REG_CONFIG  0x00
-// bits in reg
-#define IS31_REG_CONFIG_PICTUREMODE 0x00
-#define IS31_REG_CONFIG_AUTOPLAYMODE 0x08
-#define IS31_REG_CONFIG_AUDIOPLAYMODE 0x18
-// D2:D0 bits are starting frame for autoplay mode
-
-#define IS31_REG_PICTDISP 0x01 // D2:D0 frame select for picture mode
-
-#define IS31_REG_AUTOPLAYCTRL1 0x02
-// D6:D4 number of loops (000=infty)
-// D2:D0 number of frames to be used
-
-#define IS31_REG_AUTOPLAYCTRL2 0x03 // D5:D0 delay time (*11ms)
-
-#define IS31_REG_DISPLAYOPT 0x05
-#define IS31_REG_DISPLAYOPT_INTENSITY_SAME 0x20 // same intensity for all frames
-#define IS31_REG_DISPLAYOPT_BLINK_ENABLE 0x08
-// D2:D0 bits blink period time (*0.27s)
-
-#define IS31_REG_AUDIOSYNC 0x06
-#define IS31_REG_AUDIOSYNC_ENABLE 0x1
-
-#define IS31_REG_FRAMESTATE 0x07
-
-#define IS31_REG_BREATHCTRL1 0x08
-// D6:D4 fade out time (26ms*2^i)
-// D2:D0 fade in time (26ms*2^i)
-
-#define IS31_REG_BREATHCTRL2 0x09
-#define IS31_REG_BREATHCTRL2_ENABLE 0x10
-// D2:D0 extinguish time (3.5ms*2^i)
-
-#define IS31_REG_SHUTDOWN 0x0A
-#define IS31_REG_SHUTDOWN_OFF 0x1
-#define IS31_REG_SHUTDOWN_ON 0x0
-
-#define IS31_REG_AGCCTRL 0x0B
-#define IS31_REG_ADCRATE 0x0C
-
-#define IS31_COMMANDREGISTER 0xFD
-#define IS31_FUNCTIONREG 0x0B    // helpfully called 'page nine'
-
-#define IS31_TIMEOUT 10000 // needs to be long enough to write a whole page
-
-/* ========================================
- * LED Thread related items
- * ========================================*/
-
-extern mailbox_t led_mailbox;
-
-void set_led_bit (uint8_t page, uint8_t *led_control_reg, uint8_t led_addr, uint8_t action);
-void set_lock_leds (uint8_t led_addr, uint8_t led_action, uint8_t page);
-void write_led_byte (uint8_t page, uint8_t row, uint8_t led_byte);
-void write_led_page (uint8_t page, uint8_t *led_array, uint8_t led_count);
-
-// constants for signaling the LED controller thread
-enum led_msg_t {
-    KEY_LIGHT,
-    SET_FULL_ROW,
-    OFF_LED,
-    ON_LED,
-    TOGGLE_LED,
-    BLINK_OFF_LED,
-    BLINK_ON_LED,
-    BLINK_TOGGLE_LED,
-    TOGGLE_ALL,
-    TOGGLE_BACKLIGHT,
-    DISPLAY_PAGE,
-    RESET_PAGE,
-    TOGGLE_NUM_LOCK,
-    TOGGLE_CAPS_LOCK,
-    TOGGLE_BREATH,
-    STEP_BRIGHTNESS
-};
-
-#endif /* _LED_CONTROLLER_H_ */