summaryrefslogtreecommitdiffstats
path: root/keyboards/idobao/id80/v3/config.h
diff options
context:
space:
mode:
Diffstat (limited to 'keyboards/idobao/id80/v3/config.h')
-rw-r--r--keyboards/idobao/id80/v3/config.h123
1 files changed, 0 insertions, 123 deletions
diff --git a/keyboards/idobao/id80/v3/config.h b/keyboards/idobao/id80/v3/config.h
deleted file mode 100644
index e962cf1922..0000000000
--- a/keyboards/idobao/id80/v3/config.h
+++ /dev/null
@@ -1,123 +0,0 @@
-/*
-Copyright 2020 Sergey Vlasov <sigprof@gmail.com>
-Copyright 2022 peepeetee
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#pragma once
-
-#include "config_common.h"
-
-/* key matrix size */
-#define MATRIX_ROWS 9
-#define MATRIX_COLS 11
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- * The matrix description in the vendor-supplied JSON file for kbfirmware.com
- * had 9 columns:
- * { D0, D1, D2, D3, D5, D4, D6, D7, B4 }
- * and 12 rows:
- * { B7, B3, B2, B1, B0, E6, F0, F1, F4, F5, F6, F7 }
- * However, the row 6 was completely empty, and the pin F0 was not actually
- * routed anywhere on the PCB, therefore this row was removed to save some
- * resources (the EEPROM space for dynamic keymaps is especially scarce).
- *
- * After doing the above change, the matrix was transposed (rows and columns
- * were swapped), because a matrix with the COL2ROW layout can be scanned much
- * more efficiently than a matrix with the ROW2COL layout (depending on various
- * optimizations, the difference in scan rate can be over 2 times). Because of
- * this, the "columns" in the matrix layout now mostly correspond to physical
- * rows, and the "rows" have mostly vertical physical orientation.
- */
-#define MATRIX_ROW_PINS { D0, D1, D2, D3, D5, D4, D6, D7, B4 }
-#define MATRIX_COL_PINS { B7, B3, B2, B1, B0, E6, F1, F4, F5, F6, F7 }
-
-#define DIODE_DIRECTION COL2ROW
-
-#undef RGB_DI_PIN
-#define RGB_DI_PIN B6
-#ifdef RGB_MATRIX_ENABLE
-# define DRIVER_LED_TOTAL 96 /* 16 Bottom 80 top*/
-# define RGB_MATRIX_MAXIMUM_BRIGHTNESS 180 // Limit to vendor-recommended value
-// RGB Matrix Animation modes. Explicitly enabled
-// For full list of effects, see:
-// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects
-# define RGB_MATRIX_FRAMEBUFFER_EFFECTS
-# define RGB_MATRIX_KEYPRESSES
-# define ENABLE_RGB_MATRIX_ALPHAS_MODS
-# define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN
-# define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT
-# define ENABLE_RGB_MATRIX_BREATHING
-# define ENABLE_RGB_MATRIX_BAND_SAT
-# define ENABLE_RGB_MATRIX_BAND_VAL
-# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT
-# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL
-# define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT
-# define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL
-# define ENABLE_RGB_MATRIX_CYCLE_ALL
-# define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT
-# define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN
-# define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON
-# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN
-# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL
-# define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL
-# define ENABLE_RGB_MATRIX_CYCLE_SPIRAL
-# define ENABLE_RGB_MATRIX_DUAL_BEACON
-# define ENABLE_RGB_MATRIX_RAINBOW_BEACON
-# define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS
-# define ENABLE_RGB_MATRIX_RAINDROPS
-# define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS
-# define ENABLE_RGB_MATRIX_HUE_BREATHING
-# define ENABLE_RGB_MATRIX_HUE_PENDULUM
-# define ENABLE_RGB_MATRIX_HUE_WAVE
-# define ENABLE_RGB_MATRIX_PIXEL_RAIN
-# define ENABLE_RGB_MATRIX_PIXEL_FLOW
-# define ENABLE_RGB_MATRIX_PIXEL_FRACTAL
-// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined
-# define ENABLE_RGB_MATRIX_TYPING_HEATMAP
-# define ENABLE_RGB_MATRIX_DIGITAL_RAIN
-// enabled only if RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined
-# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE
-# define ENABLE_RGB_MATRIX_SOLID_REACTIVE
-# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE
-# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE
-# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS
-# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS
-# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS
-# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS
-# define ENABLE_RGB_MATRIX_SPLASH
-# define ENABLE_RGB_MATRIX_MULTISPLASH
-# define ENABLE_RGB_MATRIX_SOLID_SPLASH
-# define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH
-#endif
-
-/* Bootmagic Lite key configuration: use the Esc key */
-#define BOOTMAGIC_LITE_ROW 0
-#define BOOTMAGIC_LITE_COLUMN 5
-
-#define ENCODERS_PAD_A { C7 }
-#define ENCODERS_PAD_B { C6 }
-
-
-
-