1 files changed, 66 insertions, 0 deletions
diff --git a/keyboards/hs60/v2/keymaps/default_via/rules.mk b/keyboards/hs60/v2/keymaps/default_via/rules.mk
new file mode 100644
index 0000000000..a2850a8305
--- /dev/null
+++ b/keyboards/hs60/v2/keymaps/default_via/rules.mk
@@ -0,0 +1,66 @@
+# project specific files
+SRC =	keyboards/zeal60/zeal60.c \
+		keyboards/zeal60/rgb_backlight.c \
+		drivers/issi/is31fl3733.c \
+		quantum/color.c \
+		drivers/arm/i2c_master.c
+
+## chip/board settings
+#   the next two should match the directories in
+#   <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
+MCU_FAMILY = STM32
+MCU_SERIES = STM32F3xx
+
+# Linker script to use
+#   it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
+#   or <this_dir>/ld/
+MCU_LDSCRIPT = STM32F303xC
+
+# Startup code to use
+#  - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/
+MCU_STARTUP = stm32f3xx
+
+# Board: it should exist either in <chibios>/os/hal/boards/
+#  or <this_dir>/boards
+BOARD = GENERIC_STM32_F303XC
+
+# Cortex version
+MCU  = cortex-m4
+
+# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
+ARMV = 7
+
+USE_FPU = yes
+
+# Vector table for application
+# 0x00000000-0x00001000 area is occupied by bootlaoder.*/
+# The CORTEX_VTOR... is needed only for MCHCK/Infinity KB
+# OPT_DEFS = -DCORTEX_VTOR_INIT=0x08005000
+OPT_DEFS =
+
+# Do not put the microcontroller into power saving mode
+# when we get USB suspend event. We want it to keep updating
+# backlight effects.
+OPT_DEFS += -DNO_SUSPEND_POWER_DOWN
+
+# Options to pass to dfu-util when flashing
+DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave
+
+# Build Options
+#   comment out to disable the options.
+#
+BACKLIGHT_ENABLE = no              # Enable keyboard backlight functionality
+BOOTMAGIC_ENABLE = no              # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes              # Mouse keys
+EXTRAKEY_ENABLE = yes              # Audio control and System control
+CONSOLE_ENABLE = no                # Console for debug
+COMMAND_ENABLE = no                # Commands for debug and configuration
+SLEEP_LED_ENABLE = no              # Breathing sleep LED during USB suspend
+NKRO_ENABLE = yes                  # USB Nkey Rollover
+AUDIO_ENABLE = no                  # Audio output on port C6
+NO_USB_STARTUP_CHECK = no          # Disable initialization only when usb is plugged in
+#SERIAL_LINK_ENABLE = yes
+
+RAW_ENABLE = yes
+DYNAMIC_KEYMAP_ENABLE = yes
+CIE1931_CURVE = yes