diff options
Diffstat (limited to 'keyboards/hs60/v2/hhkb/config.h')
| -rw-r--r-- | keyboards/hs60/v2/hhkb/config.h | 140 |
1 files changed, 0 insertions, 140 deletions
diff --git a/keyboards/hs60/v2/hhkb/config.h b/keyboards/hs60/v2/hhkb/config.h deleted file mode 100644 index 4dac657b39..0000000000 --- a/keyboards/hs60/v2/hhkb/config.h +++ /dev/null @@ -1,140 +0,0 @@ -/* -Copyright 2018 Yiancar - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#pragma once - -#include "config_common.h" - -#define HS60_HHKB - -/* key matrix size */ -#define MATRIX_ROWS 5 -#define MATRIX_COLS 14 - -#define MATRIX_ROW_PINS { B3, B4, B5, A8, A4 } -#define MATRIX_COL_PINS { A13, A10, A9, A14, A15, B8, B9, C13, C14, C15, A0, A1, A2, A3 } -// To enable debugger set A13 A14 -> A5 A6 - -/* COL2ROW, ROW2COL*/ -#define DIODE_DIRECTION COL2ROW - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is userful for the Windows task manager shortcut (ctrl+shift+esc). - */ -// #define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* Bootmagic Lite key configuration */ -#define BOOTMAGIC_LITE_ROW 0 -#define BOOTMAGIC_LITE_COLUMN 0 - -/* Backlight options */ - -#define RGB_BACKLIGHT_ENABLED 1 - -#define RGB_BACKLIGHT_HS60 - -// they aren't really used if RGB_BACKLIGHT_HS60 defined -#define RGB_BACKLIGHT_USE_SPLIT_BACKSPACE 0 -#define RGB_BACKLIGHT_USE_SPLIT_LEFT_SHIFT 0 -#define RGB_BACKLIGHT_USE_SPLIT_RIGHT_SHIFT 0 -#define RGB_BACKLIGHT_USE_7U_SPACEBAR 0 -#define RGB_BACKLIGHT_USE_ISO_ENTER 0 -#define RGB_BACKLIGHT_DISABLE_HHKB_BLOCKER_LEDS 0 - -// disable backlight when USB suspended (PC sleep/hibernate/shutdown) -#define RGB_BACKLIGHT_DISABLE_WHEN_USB_SUSPENDED 0 - -// disable backlight after timeout in minutes, 0 = no timeout -#define RGB_BACKLIGHT_DISABLE_AFTER_TIMEOUT 0 - -// the default brightness -#define RGB_BACKLIGHT_BRIGHTNESS 255 - -// the default effect (RGB test) -#define RGB_BACKLIGHT_EFFECT 6 - -// the default effect speed (0-3) -#define RGB_BACKLIGHT_EFFECT_SPEED 0 - -// the default color1 and color2 -#define RGB_BACKLIGHT_COLOR_1 { .h = 0, .s = 255 } -#define RGB_BACKLIGHT_COLOR_2 { .h = 127, .s = 255 } - -#define DRIVER_COUNT 2 -#define DRIVER_LED_TOTAL 64 - -// These define which keys in the matrix are alphas/mods -// Used for backlight effects so colors are different for -// alphas vs. mods -// Each value is for a row, bit 0 is column 0 -// Alpha=0 Mod=1 -#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_0 0b0000000000000001 -#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_1 0b0000000000000001 -#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_2 0b0011000000000001 -#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_3 0b0011000000000001 -#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_4 0b0011100000000111 - -#define RGB_BACKLIGHT_CAPS_LOCK_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 } -#define RGB_BACKLIGHT_LAYER_1_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 } -#define RGB_BACKLIGHT_LAYER_2_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 } -#define RGB_BACKLIGHT_LAYER_3_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 } - -// Backlight config starts after VIA's EEPROM usage, -// dynamic keymaps start after this. -#define VIA_EEPROM_CUSTOM_CONFIG_SIZE 32 - -// VIA lighting is handled by the keyboard-level code -#define VIA_CUSTOM_LIGHTING_ENABLE |