diff options
Diffstat (limited to 'keyboards/hs60/v1/config.h')
| -rw-r--r-- | keyboards/hs60/v1/config.h | 143 |
1 files changed, 143 insertions, 0 deletions
diff --git a/keyboards/hs60/v1/config.h b/keyboards/hs60/v1/config.h new file mode 100644 index 0000000000..c297a6e191 --- /dev/null +++ b/keyboards/hs60/v1/config.h @@ -0,0 +1,143 @@ +/* +Copyright 2018 Yiancar + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x0257 +#define DEVICE_VER 0x0001 +#define MANUFACTURER Yiancar-Designs +#define PRODUCT HS60 +#define DESCRIPTION GH60 compatible, tool free RGB keyboard + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 14 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * +*/ +#define MATRIX_ROW_PINS { B0, B1, B2, B3, F7 } +#define MATRIX_COL_PINS { F1, F4, F5, E6, F0, B7, D2, D3, D5, D4, D6, D7, B4, B5 } +#define UNUSED_PINS { B6, C6, C7, F6 } + +/* bootloader configuration */ + +#define QMK_ESC_OUTPUT B5 // usually COL +#define QMK_ESC_INPUT B2 // usually ROW + +/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */ +#define DIODE_DIRECTION COL2ROW + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCING_DELAY 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. + * This is userful for the Windows task manager shortcut (ctrl+shift+esc). + */ +// #define GRAVE_ESC_CTRL_OVERRIDE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Magic Key Options + * + * Magic keys are hotkey commands that allow control over firmware functions of + * the keyboard. They are best used in combination with the HID Listen program, + * found here: https://www.pjrc.com/teensy/hid_listen.html + * + * The options below allow the magic key functionality to be changed. This is + * useful if your keyboard/keypad is missing keys and you want magic key support. + * + */ + +/* key combination for magic key command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* Backlight options */ + +//This is experimental do not enable yet +//#define RGB_MATRIX_KEYPRESSES // reacts to keypresses (will slow down matrix scan by a lot) + +#define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects +#define RGB_DISABLE_WHEN_USB_SUSPENDED false // turn off effects when suspended +#define RGB_MATRIX_SKIP_FRAMES 0 +#define RGB_MATRIX_MAXIMUM_BRIGHTNESS 215 + +#define DRIVER_ADDR_1 0b1110100 +#define DRIVER_ADDR_2 0b1110101 + +#define DRIVER_COUNT 2 +#define DRIVER_1_LED_TOTAL 30 + +#ifdef HS60_ANSI +#define DRIVER_2_LED_TOTAL 31 +#else +#define DRIVER_2_LED_TOTAL 32 +#endif + +#define DRIVER_LED_TOTAL DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL |