diff options
Diffstat (limited to 'keyboards/honeycomb')
-rwxr-xr-x | keyboards/honeycomb/config.h | 45 | ||||
-rwxr-xr-x | keyboards/honeycomb/honeycomb.c | 76 | ||||
-rwxr-xr-x | keyboards/honeycomb/honeycomb.h | 32 | ||||
-rw-r--r-- | keyboards/honeycomb/info.json | 30 | ||||
-rwxr-xr-x | keyboards/honeycomb/keymaps/default/keymap.c | 91 | ||||
-rwxr-xr-x | keyboards/honeycomb/matrix.c | 190 | ||||
-rwxr-xr-x | keyboards/honeycomb/readme.md | 20 | ||||
-rwxr-xr-x | keyboards/honeycomb/rules.mk | 23 |
8 files changed, 0 insertions, 507 deletions
diff --git a/keyboards/honeycomb/config.h b/keyboards/honeycomb/config.h deleted file mode 100755 index 6780c2d41b..0000000000 --- a/keyboards/honeycomb/config.h +++ /dev/null @@ -1,45 +0,0 @@ -/* -Copyright 2019 @filoxo - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#pragma once - -#include "config_common.h" - -/* USB Device descriptor parameter */ - -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0xACC8 -#define DEVICE_VER 0x0001 -#define MANUFACTURER Keyhive -#define PRODUCT Honeycomb Macropad - -/* key matrix size */ -#define MATRIX_ROWS 1 -#define MATRIX_COLS 16 - -#define ONESHOT_TIMEOUT 500 - -/* disable debug print */ -//#define NO_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT diff --git a/keyboards/honeycomb/honeycomb.c b/keyboards/honeycomb/honeycomb.c deleted file mode 100755 index 603400c7a3..0000000000 --- a/keyboards/honeycomb/honeycomb.c +++ /dev/null @@ -1,76 +0,0 @@ -#include "honeycomb.h" -#include "pointing_device.h" -#include "report.h" - -void pointing_device_task(void){ - /*report_mouse_t currentReport = {}; - uint32_t timeout = 0; - - //the m character requests the RF slave to send the mouse report - uart_write('m'); - - //trust the external inputs completely, erase old data - uint8_t uart_data[5] = {0}; - - //there are 10 bytes corresponding to 10 columns, and an end byte - for (uint8_t i = 0; i < 5; i++) { - //wait for the serial data, timeout if it's been too long - //this only happened in testing with a loose wire, but does no - //harm to leave it in here - while(!uart_available()){ - timeout++; - if (timeout > 10000){ - xprintf("\r\nTIMED OUT"); - break; - } - } - xprintf("\r\nGOT DATA for %d",i); - uart_data[i] = uart_read(); - } - - //check for the end packet, bytes 1-4 are movement and scroll - //but byte 5 has bits 0-3 for the scroll button state - //(1000 if pressed, 0000 if not) and bits 4-7 are always 1 - //We can use this to verify the report sent properly. - if (uart_data[4] == 0x0F || uart_data[4] == 0x8F) - { - xprintf("\r\nREQUESTED MOUSE, RECEIVED %i, %i, %i, %i, %i",uart_data[0],uart_data[1],uart_data[2],uart_data[3],uart_data[4]); - currentReport = pointing_device_get_report(); - //shifting and transferring the info to the mouse report varaible - //mouseReport.x = 127 max -127 min - currentReport.x = (int8_t) uart_data[0]; - //mouseReport.y = 127 max -127 min - currentReport.y = (int8_t) uart_data[1]; - //mouseReport.v = 127 max -127 min (scroll vertical) - currentReport.v = (int8_t) uart_data[2]; - //mouseReport.h = 127 max -127 min (scroll horizontal) - currentReport.h = (int8_t) uart_data[3]; - //mouseReport.buttons = 0x31 max (bitmask for mouse buttons 1-5) 0x00 min - //mouse buttons 1 and 2 are handled by the keymap, but not 3 - if (uart_data[4] == 0x0F) { //then 3 is not pressed - currentReport.buttons &= ~MOUSE_BTN3; //MOUSE_BTN3 is def in report.h - } else { //3 must be pressed - currentReport.buttons |= MOUSE_BTN3; - } - pointing_device_set_report(currentReport); - } else { - xprintf("\r\nRequested packet, data 4 was %d",uart_data[4]); - }*/ - pointing_device_send(); -} - -void led_init(void) { - setPinOutput(D1); - writePinHigh(D1); - setPinOutput(F4); - writePinHigh(F4); - setPinOutput(F5); - writePinHigh(F5); -} - -void matrix_init_kb(void) { - // put your keyboard start-up code here - // runs once when the firmware starts up - matrix_init_user(); - led_init(); -} diff --git a/keyboards/honeycomb/honeycomb.h b/keyboards/honeycomb/honeycomb.h deleted file mode 100755 index ec54b59f20..0000000000 --- a/keyboards/honeycomb/honeycomb.h +++ /dev/null @@ -1,32 +0,0 @@ -#pragma once - -#include "quantum.h" - -#define RED_LED_OFF() writePinHigh(F6) -#define RED_LED_ON() writePinLow(F6) -#define BLU_LED_OFF() writePinHigh(F5) -#define BLU_LED_ON() writePinLow(F5) -#define GRN_LED_OFF() writePinHigh(D1) -#define GRN_LED_ON() writePinLow(D1) - -#define SET_LED_OFF (RED_LED_OFF(); GRN_LED_OFF(); BLU_LED_OFF(); ) -#define SET_LED_RED (RED_LED_ON(); GRN_LED_OFF(); BLU_LED_OFF(); ) -#define SET_LED_BLUE (RED_LED_OFF(); GRN_LED_OFF(); BLU_LED_ON(); ) -#define SET_LED_GREEN (RED_LED_OFF(); GRN_LED_ON(); BLU_LED_OFF(); ) -#define SET_LED_YELLOW (RED_LED_ON(); GRN_LED_ON(); BLU_LED_OFF(); ) -#define SET_LED_MAGENTA (RED_LED_ON(); GRN_LED_OFF(); BLU_LED_ON(); ) -#define SET_LED_CYAN (RED_LED_OFF(); GRN_LED_ON(); BLU_LED_ON(); ) -#define SET_LED_WHITE (RED_LED_ON(); GRN_LED_ON(); BLU_LED_ON(); ) - -// This a shortcut to help you visually see your layout. -// The first section contains all of the arguements -// The second converts the arguments into a two-dimensional array -#define LAYOUT( \ - k13, k14, k15, k16, \ - k09, k10, k11, k12, \ - k05, k06, k07, k08, \ - k01, k02, k03, k04 \ -) \ -{ \ - { k01, k02, k03, k04, k05, k06, k07, k08, k09, k10, k11, k12, k13, k14, k15, k16 } \ -} diff --git a/keyboards/honeycomb/info.json b/keyboards/honeycomb/info.json deleted file mode 100644 index b11ece332b..0000000000 --- a/keyboards/honeycomb/info.json +++ /dev/null @@ -1,30 +0,0 @@ -{ - "keyboard_name": "Honeycomb", - "url": "", - "maintainer": "filoxo", - "layouts": { - "LAYOUT": { - "layout": [ - {"x":0, "y":0}, - {"x":1, "y":0}, - {"x":2, "y":0}, - {"x":3, "y":0}, - - {"x":0, "y":1}, - {"x":1, "y":1}, - {"x":2, "y":1}, - {"x":3, "y":1}, - - {"x":0, "y":2}, - {"x":1, "y":2}, - {"x":2, "y":2}, - {"x":3, "y":2}, - - {"x":0, "y":3}, - {"x":1, "y":3}, - {"x":2, "y":3}, - {"x":3, "y":3} - ] - } - } -} diff --git a/keyboards/honeycomb/keymaps/default/keymap.c b/keyboards/honeycomb/keymaps/default/keymap.c deleted file mode 100755 index d0a5961873..0000000000 --- a/keyboards/honeycomb/keymaps/default/keymap.c +++ /dev/null @@ -1,91 +0,0 @@ -#include QMK_KEYBOARD_H - -// Each layer gets a name for readability, which is then used in the keymap matrix below. -// The underscores don't mean anything - you can have a layer called STUFF or any other name. -// Layer names don't all need to be of the same length, obviously, and you can also skip them -// entirely and just use numbers. -enum honeycomb_layers { - _BS, - _EN -}; - -// Macro definitions for readability -enum honeycomb_keycodes { - HW = SAFE_RANGE, - COPY, - PASTA -}; - -extern int8_t encoderValue; - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [_BS] = LAYOUT( /* Base layout, put whatever defaults. */ - HW, COPY, PASTA, KC_MUTE, - KC_4, KC_5, KC_6, KC_7, - KC_8, KC_9, KC_A, KC_B, - KC_C, KC_D, KC_E, KC_F - ), - - [_EN] = LAYOUT( /* Alternate layer */ - _______, _______, _______, _______, - _______, _______, _______, _______, - _______, _______, _______, _______, - _______, _______, _______, _______ - ) -}; - -report_mouse_t currentReport = {}; - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - //uint8_t layer = biton32(layer_state); // get the current layer - - // Basic example functions - switch (keycode) { - case HW: - if (record->event.pressed) { - SEND_STRING("Hello, world!"); - } else { - SEND_STRING("Goodbye, cruel world!"); - } - break; - case COPY: - if (record->event.pressed) { - tap_code16(LCTL(KC_C)); // Replace with tap_code16(LCMD(KC_C)) to enable for Mac - } - break; - case PASTA: - if (record->event.pressed) { - tap_code16(LCTL(KC_V)); // Replace with tap_code16(LCMD(KC_V)) to enable for Mac - } - break; - return false; - } - return true; -}; - -void matrix_scan_user(void) { - /* Leaving some LED stuff in here in comment form so you can see how to use it. - if (shiftLED || capsLED){ - red_led_on; - } else { - red_led_off; - } - if (numLED){ - grn_led_on; - } else { - grn_led_off; - } - if (mouseLED){ - blu_led_on; - } else { - blu_led_off; - }*/ - while (encoderValue < 0){ - tap_code(KC_VOLD); - encoderValue++; - } - while (encoderValue > 0){ - tap_code(KC_VOLU); - encoderValue--; - } -}; diff --git a/keyboards/honeycomb/matrix.c b/keyboards/honeycomb/matrix.c deleted file mode 100755 index 9a87ca9a2e..0000000000 --- a/keyboards/honeycomb/matrix.c +++ /dev/null @@ -1,190 +0,0 @@ -/* -Copyright 2012 Jun Wako -Copyright 2014 Jack Humbert -Copyright 2019 @filoxo - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ -#include <stdint.h> -#include <stdbool.h> -#if defined(__AVR__) -#include <avr/io.h> -#endif -#include "wait.h" -#include "print.h" -#include "debug.h" -#include "util.h" -#include "matrix.h" -#include "timer.h" -#include "honeycomb.h" -#include "pointing_device.h" -#include "report.h" -#include "uart.h" - -#if (MATRIX_COLS <= 8) -# define print_matrix_header() print("\nr/c 01234567\n") -# define print_matrix_row(row) print_bin_reverse8(matrix_get_row(row)) -# define ROW_SHIFTER ((uint8_t)1) -#elif (MATRIX_COLS <= 16) -# define print_matrix_header() print("\nr/c 0123456789ABCDEF\n") -# define print_matrix_row(row) print_bin_reverse16(matrix_get_row(row)) -# define ROW_SHIFTER ((uint16_t)1) -#elif (MATRIX_COLS <= 32) -# define print_matrix_header() print("\nr/c 0123456789ABCDEF0123456789ABCDEF\n") -# define print_matrix_row(row) print_bin_reverse32(matrix_get_row(row)) -# define ROW_SHIFTER ((uint32_t)1) -#endif - -/* matrix state(1:on, 0:off) */ -static matrix_row_t matrix[MATRIX_ROWS]; -//extern int8_t encoderValue; -int8_t encoderValue = 0; - -__attribute__ ((weak)) -void matrix_init_quantum(void) { - matrix_init_kb(); -} - -__attribute__ ((weak)) -void matrix_scan_quantum(void) { - matrix_scan_kb(); -} - -__attribute__ ((weak)) -void matrix_init_kb(void) { - matrix_init_user(); -} - -__attribute__ ((weak)) -void matrix_scan_kb(void) { - matrix_scan_user(); -} - -__attribute__ ((weak)) -void matrix_init_user(void) { -} - -__attribute__ ((weak)) -void matrix_scan_user(void) { -} - -inline -uint8_t matrix_rows(void) { - return MATRIX_ROWS; -} - -inline -uint8_t matrix_cols(void) { - return MATRIX_COLS; -} - -void matrix_init(void) { - - matrix_init_quantum(); - uart_init(1000000); -} - -uint8_t matrix_scan(void) -{ - uint32_t timeout = 0; - - // The 's' character requests the RF slave to send the matrix - uart_write('s'); - - // Trust the external keystates entirely, erase the last data - uint8_t uart_data[4] = {0}; - - // There are 3 bytes corresponding to the data, and a checksum - for (uint8_t i = 0; i < 4; i++) { - // Wait for the serial data, timeout if it's been too long - // This only happened in testing with a loose wire, but does no - // harm to leave it in here - while(!uart_available()){ - timeout++; - if (timeout > 10000){ - xprintf("\r\nTime out in keyboard."); - break; - } - } - uart_data[i] = uart_read(); - } - - // Check for the end packet, it's our checksum. - // Will only be a match if the correct bytes were recieved - if (uart_data[3] == (uart_data[0] ^ uart_data[1] ^ uart_data[2])) { // This is an arbitrary checksum calculated by XORing all the data. - // Transferring the keystates to the QMK matrix variable - /* ASSUMING MSB FIRST */ - matrix[0] = ((uint16_t) uart_data[0] << 8) | ((uint16_t) uart_data[1]); - encoderValue += (int8_t) uart_data[2]; - if ((uart_data[0] | uart_data[1] | uart_data[2])!=0){ - xprintf("\r\n0x%0X%02X%02X",uart_data[0],uart_data[1], uart_data[2]); - } - /* OK, TURNS OUT THAT WAS A BAD ASSUMPTION */ - for (uint8_t i = 0; i < MATRIX_ROWS; i++) { - // I've unpacked these into the mirror image of what QMK expects them to be, so... - matrix[i] = bitrev16(matrix[i]); - // So I'll reverse it, and this should be fine now. - } - - // A mouse report for scrolling would go here, but I don't plan on doing scrolling with the encoder. So. - - report_mouse_t currentReport = {}; -/* - currentReport = pointing_device_get_report(); - //mouseReport.x = 127 max -127 min - currentReport.x = (int8_t) uart_data[6]; - //mouseReport.y = 127 max -127 min - currentReport.y = (int8_t) uart_data[7]; - //mouseReport.v = 127 max -127 min (scroll vertical) - currentReport.v = (int8_t) uart_data[8]; - //mouseReport.h = 127 max -127 min (scroll horizontal) - currentReport.h = (int8_t) uart_data[9]; - */ - /* - currentReport.x = 0; - currentReport.y = 0; - currentReport.v = 0; - currentReport.h = 0;*/ - - pointing_device_set_report(currentReport); - } else { - xprintf("\r\nRequested packet, data 3 was %d",uart_data[3]); - } - - matrix_scan_quantum(); - return 1; -} - -inline -bool matrix_is_on(uint8_t row, uint8_t col) -{ - return (matrix[row] & ((matrix_row_t)1<col)); -} - -inline -matrix_row_t matrix_get_row(uint8_t row) -{ - return matrix[row]; -} - -void matrix_print(void) -{ - print_matrix_header(); - - for (uint8_t row = 0; row < MATRIX_ROWS; row++) { - print_hex8(row); print(": "); - print_matrix_row(row); - print("\n"); - } -} diff --git a/keyboards/honeycomb/readme.md b/keyboards/honeycomb/readme.md deleted file mode 100755 index 955f0ac7a2..0000000000 --- a/keyboards/honeycomb/readme.md +++ /dev/null @@ -1,20 +0,0 @@ -Honeycomb Keyboard Firmware -====================== - -These configuration files use a completely different 'matrix scan' system than other keyboards, it relies on an external nRF51822 microcontroller maintaining a matrix of keystates received from the macropad - it also receives rotary encoder information from the macropad. The matrix.c file contains the code to poll the external microcontroller for the key matrix, and the keymap.c file contains example code for encoder use. As long as the relevant functions in these files are not changed, all other QMK features are supported. - -## Building - -Run the following command in your terminal: - -``` -make honeycomb:default -# or use this to automatically flash the controller -make honeycomb:default:avrdude -``` - -Follow the QMK guide for this or ask in Discord. - -### Other Keymaps - -Because this is a totally custom macropad, it is recommended that you copy the `default/` folder, rename it as desired, and modify the `keymap.c` to your liking.
\ No newline at end of file diff --git a/keyboards/honeycomb/rules.mk b/keyboards/honeycomb/rules.mk deleted file mode 100755 index 420e409e43..0000000000 --- a/keyboards/honeycomb/rules.mk +++ /dev/null @@ -1,23 +0,0 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = caterina - -# Build Options -# change yes to no to disable -# -BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite -#MOUSEKEY_ENABLE = yes # Mouse keys -POINTING_DEVICE_ENABLE = yes # Generic Pointer, not as big as mouse keys hopefully. -POINTING_DEVICE_DRIVER = custom -EXTRAKEY_ENABLE = yes # Audio control and System control -CONSOLE_ENABLE = yes # Console for debug -COMMAND_ENABLE = yes # Commands for debug and configuration -CUSTOM_MATRIX = yes # Remote matrix from the wireless bridge -NKRO_ENABLE = yes # Enable N-Key Rollover -# BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality - -# # project specific files -SRC += matrix.c -QUANTUM_LIB_SRC += uart.c |