5 files changed, 0 insertions, 141 deletions
diff --git a/keyboards/hillside/52/0_1/0_1.c b/keyboards/hillside/52/0_1/0_1.c
deleted file mode 100644
index 9a9808da8c..0000000000
--- a/keyboards/hillside/52/0_1/0_1.c
+++ /dev/null
@@ -1,21 +0,0 @@
-// Copyright 2022 Michael McCoyd (@mmccoyd)
-// SPDX-License-Identifier: GPL-2.0-or-later
-
-#include "0_1.h"
-
-// Keymatrix spots to ignore, as one signals handedness and others have no key
-const matrix_row_t matrix_mask[] = {
-//c:543210  column id's
-  0b111111,
-  0b111111,
-  0b111111,
-  0b000111,
-  0b111110,
-  
-//c:543210  
-  0b111111,
-  0b111111,
-  0b111111,
-  0b000111,
-  0b111110
-};
diff --git a/keyboards/hillside/52/0_1/0_1.h b/keyboards/hillside/52/0_1/0_1.h
deleted file mode 100644
index f09d896938..0000000000
--- a/keyboards/hillside/52/0_1/0_1.h
+++ /dev/null
@@ -1,39 +0,0 @@
-// Copyright 2021 Michael McCoyd (@mmccoyd)
-// SPDX-License-Identifier: GPL-2.0-or-later
-
-#pragma once
-
-#include "quantum.h"
-
-/* This is a mapping so keymap files can be more readable to humans.
- *
- * The first section contains all of the arguments representing the physical
- * layout of the board and position of the keys.
- *
- * The second converts those identifiers into a two-dimensional array which
- * represents the switch matrix.
- * 
- * The identifiers could be anything, but for human sanity have the folowing form
- * <Left or Right><Physical or thumb row><Circuit column counting from outer pinky>
- */
-
-// clang-format off
-#define LAYOUT( \
-  L00, L01, L02, L03, L04, L05,                     R05, R04, R03, R02, R01, R00, \
-  L10, L11, L12, L13, L14, L15,                     R15, R14, R13, R12, R11, R10, \
-  L20, L21, L22, L23, L24, L25, LT5,           RT5, R25, R24, R23, R22, R21, R20, \
-  L30, L31, L32,      LT1, LT2, LT3, LT4, RT4, RT3, RT2, RT1,      R32, R31, R30 \
-  ) \
-  { \
-    { L00,   L01, L02, L03,   L04,   L05 }, \
-    { L10,   L11, L12, L13,   L14,   L15 }, \
-    { L20,   L21, L22, L23,   L24,   L25 }, \
-    { L30,   L31, L32, KC_NO, KC_NO, KC_NO }, \
-    { KC_NO, LT1, LT2, LT3,   LT4,   LT5 }, \
-    { R00,   R01, R02, R03,   R04,   R05 }, \
-    { R10,   R11, R12, R13,   R14,   R15 }, \
-    { R20,   R21, R22, R23,   R24,   R25 }, \
-    { R30,   R31, R32, KC_NO, KC_NO, KC_NO }, \
-    { KC_NO, RT1, RT2, RT3,   RT4,   RT5 } \
-  }
-// clang-format on
diff --git a/keyboards/hillside/52/0_1/config.h b/keyboards/hillside/52/0_1/config.h
deleted file mode 100644
index 23872aa37b..0000000000
--- a/keyboards/hillside/52/0_1/config.h
+++ /dev/null
@@ -1,39 +0,0 @@
-// Copyright 2022 Michael McCoyd (@mmccoyd)
-// SPDX-License-Identifier: GPL-2.0-or-later
-
-#pragma once
-
-#include "config_common.h"
-
-/* key matrix size */
-// Rows are doubled-up
-#define MATRIX_ROWS 10
-#define MATRIX_COLS 6
-
-/* Split */
-#define SPLIT_HAND_MATRIX_GRID B5, F6
-#define MATRIX_MASKED
-
-/* Encoder */
-#define ENCODERS_PAD_A { F5 }
-#define ENCODERS_PAD_B { F4 }
-#define ENCODERS_PAD_A_RIGHT { F4 }
-#define ENCODERS_PAD_B_RIGHT { F5 }
-
-#define RGBLIGHT_SLEEP
-
-/* Haptic hardware */
-// The Pimoroni is the likely hardware, for which these settings work
-#define FB_ERM_LRA 1
-#define FB_BRAKEFACTOR 3 /* 1x:0, 2x:1, 3x:2, 4x:3, 6:4, 8:5, 16:6, Disable:7 */
-#define FB_LOOPGAIN 1 /* For  Low:0, Medium:1, High:2, Very High:3 */
-/* Please refer to your datasheet for optimal setting for your specific motor.*/
-#define RATED_VOLTAGE 2
-#define V_PEAK 2.8
-#define V_RMS 2.0
-#define F_LRA 205 /* resonance freq */
-
-/* Haptic waveforms */
-// Two mild waveforms
-#define DRV_GREETING alert_750ms
-#define DRV_MODE_DEFAULT sharp_tick3_60
diff --git a/keyboards/hillside/52/0_1/info.json b/keyboards/hillside/52/0_1/info.json
deleted file mode 100644
index f5cf4486d5..0000000000
--- a/keyboards/hillside/52/0_1/info.json
+++ /dev/null
@@ -1,34 +0,0 @@
-{
-    "processor": "atmega32u4",
-    "bootloader": "atmel-dfu",
-
-    "matrix_pins": {
-        "rows": ["C6", "D7", "E6", "B4", "B5"],
-        "cols": ["F6", "F7", "B1", "B3", "B2", "B6"]
-     },    
-    "diode_direction": "COL2ROW",
-
-    "usb": {
-      "vid": "0x4D4D",
-      "pid": "0x4852",
-      "device_version": "0.0.1"
-    },
-
-    "features": {
-        "encoder": true,
-        "extrakey": true,
-        "rgblight": true
-    },
-    "split": {
-        "soft_serial_pin": "D2"
-    },
-
-    "rgblight": {
-        "led_count": 5,
-        "pin": "D3",
-        "split": true,
-        "hue_steps": 8,
-        "saturation_steps": 8,
-        "brightness_steps": 8
-    }
-}
diff --git a/keyboards/hillside/52/0_1/rules.mk b/keyboards/hillside/52/0_1/rules.mk
deleted file mode 100644
index 2501147ea8..0000000000
--- a/keyboards/hillside/52/0_1/rules.mk
+++ /dev/null
@@ -1,8 +0,0 @@
-SPLIT_KEYBOARD = yes        # Use shared split_common code
-LTO_ENABLE = yes            # Use link time optimization for smaller firmware
-
-# If you add a haptic board,
-# enable it and set its driver here or in your keymap folder
-# The Pimoroni board's driver is DRV2605L 
-# HAPTIC_ENABLE = yes        # Enable haptic driver
-# HAPTIC_DRIVER = DRV2605L