diff options
Diffstat (limited to 'keyboards/hhkb/yang/config.h')
| -rw-r--r-- | keyboards/hhkb/yang/config.h | 123 |
1 files changed, 0 insertions, 123 deletions
diff --git a/keyboards/hhkb/yang/config.h b/keyboards/hhkb/yang/config.h deleted file mode 100644 index e1fa406a0b..0000000000 --- a/keyboards/hhkb/yang/config.h +++ /dev/null @@ -1,123 +0,0 @@ -/* -Copyright 2020 Kan-Ru Chen <kanru@kanru.info> -Copyright 2012 Jun Wako <wakojun@gmail.com> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#pragma once - -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 8 -#define MATRIX_COLS 8 - -/* matrix power saving */ -#define MATRIX_POWER_SAVE_TIMEOUT_MS 10000 -#define MATRIX_POWER_SAVE_TIMEOUT_L2_MS 1800000 -#define MATRIX_POWER_SAVE_TIMEOUT_L3_MS 7200000 - -#define LED_CAPS_LOCK_PIN F4 - -#ifdef BLUETOOTH_ENABLE -# define OUTPUT_DEFAULT OUTPUT_AUTO - -# undef SERIAL_UART_BAUD -# undef SERIAL_UART_DATA -# undef SERIAL_UART_UBRR -# undef SERIAL_UART_RXD_VECT -# undef SERIAL_UART_TXD_READY -# undef SERIAL_UART_INIT - -# define SERIAL_UART_BAUD 76800 -# define SERIAL_UART_DATA UDR1 -# define SERIAL_UART_UBRR (F_CPU / (8UL * SERIAL_UART_BAUD) - 1) -# define SERIAL_UART_RXD_VECT USART1_RX_vect -# define SERIAL_UART_TXD_READY (UCSR1A & _BV(UDRE1)) -# define SERIAL_UART_INIT() \ - do { \ - cli(); \ - /* baud rate */ \ - UBRR1L = SERIAL_UART_UBRR; \ - /* baud rate */ \ - UBRR1H = SERIAL_UART_UBRR >> 8; \ - /* enable TX */ \ - UCSR1B |= (0 << TXCIE1) | (1 << TXEN1); \ - /* enable RX */ \ - UCSR1B |= (1 << RXCIE1) | (1 << RXEN1); \ - /* parity: none(00), even(01), odd(11) */ \ - UCSR1C |= (0 << UPM11) | (0 << UPM10); \ - /* 2x speed (error = 0.2%) */ \ - UCSR1A |= (1 << U2X1); \ - sei(); \ - } while (0) -#endif - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -//#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -//#define LOCKING_RESYNC_ENABLE - -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is useful for the Windows task manager shortcut (ctrl+shift+esc). - */ -//#define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -//#define NO_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT - - -/* Bootmagic Lite key configuration */ -//#define BOOTMAGIC_LITE_ROW 0 -//#define BOOTMAGIC_LITE_COLUMN 0 - -//#define DEBUG_MATRIX_SCAN_RATE - -// Disable debounce -#define DEBOUNCE 0 |