11 files changed, 133 insertions, 729 deletions

diff --git a/keyboards/helix/rev2/config.h b/keyboards/helix/rev2/config.h
index 577edba56b..8c6210bae4 100644
--- a/keyboards/helix/rev2/config.h
+++ b/keyboards/helix/rev2/config.h
@@ -45,12 +45,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // #define MASTER_RIGHT
 // #define EE_HANDS
 
-// Helix keyboard OLED support
-//      see ./local_features.mk: OLED_SELECT=local
-#ifdef OLED_LOCAL_ENABLE
-  #define SSD1306OLED
-#endif
-
 #define OLED_UPDATE_INTERVAL 50
 
 /* Select rows configuration */
diff --git a/keyboards/helix/rev2/custom/matrix.c b/keyboards/helix/rev2/custom/matrix.c
deleted file mode 100644
index 5221d7fd4e..0000000000
--- a/keyboards/helix/rev2/custom/matrix.c
+++ /dev/null
@@ -1,341 +0,0 @@
-/*
-Copyright 2012 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-/*
- * scan matrix
- */
-#include <stdint.h>
-#include <stdbool.h>
-#include <string.h>
-#include <avr/io.h>
-#include <avr/wdt.h>
-#include <avr/interrupt.h>
-#include <util/delay.h>
-#include "print.h"
-#include "debug.h"
-#include "util.h"
-#include "matrix.h"
-#include "split_util.h"
-#include "quantum.h"
-
-#ifdef USE_MATRIX_I2C
-#  include "i2c.h"
-#else // USE_SERIAL
-#  include "split_scomm.h"
-#endif
-
-#ifndef DEBOUNCE
-#  define DEBOUNCE	5
-#endif
-
-#define ERROR_DISCONNECT_COUNT 5
-
-static uint8_t debouncing = DEBOUNCE;
-static const int ROWS_PER_HAND = MATRIX_ROWS/2;
-static uint8_t error_count = 0;
-
-static const uint8_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS;
-static const uint8_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS;
-
-/* matrix state(1:on, 0:off) */
-static matrix_row_t matrix[MATRIX_ROWS];
-static matrix_row_t matrix_debouncing[MATRIX_ROWS];
-
-static matrix_row_t read_cols(void);
-static void init_cols(void);
-static void unselect_rows(void);
-static void select_row(uint8_t row);
-static uint8_t matrix_master_scan(void);
-
-
-__attribute__ ((weak))
-void matrix_init_kb(void) {
-    matrix_init_user();
-}
-
-__attribute__ ((weak))
-void matrix_scan_kb(void) {
-    matrix_scan_user();
-}
-
-__attribute__ ((weak))
-void matrix_init_user(void) {
-}
-
-__attribute__ ((weak))
-void matrix_scan_user(void) {
-}
-
-inline
-uint8_t matrix_rows(void)
-{
-    return MATRIX_ROWS;
-}
-
-inline
-uint8_t matrix_cols(void)
-{
-    return MATRIX_COLS;
-}
-
-void matrix_init(void)
-{
-    split_keyboard_setup();
-
-    // initialize row and col
-    unselect_rows();
-    init_cols();
-
-    setPinOutput(B0);
-    setPinOutput(D5);
-    writePinHigh(B0);
-    writePinHigh(D5);
-
-    // initialize matrix state: all keys off
-    for (uint8_t i=0; i < MATRIX_ROWS; i++) {
-        matrix[i] = 0;
-        matrix_debouncing[i] = 0;
-    }
-
-    matrix_init_quantum();
-}
-
-uint8_t _matrix_scan(void)
-{
-    // Right hand is stored after the left in the matirx so, we need to offset it
-    int offset = isLeftHand ? 0 : (ROWS_PER_HAND);
-
-    for (uint8_t i = 0; i < ROWS_PER_HAND; i++) {
-        select_row(i);
-        _delay_us(30);  // without this wait read unstable value.
-        matrix_row_t cols = read_cols();
-        if (matrix_debouncing[i+offset] != cols) {
-            matrix_debouncing[i+offset] = cols;
-            debouncing = DEBOUNCE;
-        }
-        unselect_rows();
-    }
-
-    if (debouncing) {
-        if (--debouncing) {
-            _delay_ms(1);
-        } else {
-            for (uint8_t i = 0; i < ROWS_PER_HAND; i++) {
-                matrix[i+offset] = matrix_debouncing[i+offset];
-            }
-        }
-    }
-
-    return 1;
-}
-
-#ifdef USE_MATRIX_I2C
-
-// Get rows from other half over i2c
-int i2c_transaction(void) {
-    int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0;
-
-    int err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_WRITE);
-    if (err) goto i2c_error;
-
-    // start of matrix stored at 0x00
-    err = i2c_master_write(0x00);
-    if (err) goto i2c_error;
-
-    // Start read
-    err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_READ);
-    if (err) goto i2c_error;
-
-    if (!err) {
-        int i;
-        for (i = 0; i < ROWS_PER_HAND-1; ++i) {
-            matrix[slaveOffset+i] = i2c_master_read(I2C_ACK);
-        }
-        matrix[slaveOffset+i] = i2c_master_read(I2C_NACK);
-        i2c_master_stop();
-    } else {
-i2c_error: // the cable is disconnceted, or something else went wrong
-        i2c_reset_state();
-        return err;
-    }
-
-    return 0;
-}
-
-#else // USE_SERIAL
-
-int serial_transaction(int master_changed) {
-    int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0;
-#ifdef SERIAL_USE_MULTI_TRANSACTION
-    int ret=serial_update_buffers(master_changed);
-#else
-    int ret=serial_update_buffers();
-#endif
-    if (ret ) {
-        if(ret==2) writePinLow(B0);
-        return 1;
-    }
-    writePinHigh(B0);
-    memcpy(&matrix[slaveOffset],
-        (void *)serial_slave_buffer, sizeof(serial_slave_buffer));
-    return 0;
-}
-#endif
-
-uint8_t matrix_scan(void)
-{
-    if (is_helix_master()) {
-        matrix_master_scan();
-    }else{
-        matrix_slave_scan();
-        int offset = (isLeftHand) ? ROWS_PER_HAND : 0;
-        memcpy(&matrix[offset],
-               (void *)serial_master_buffer, sizeof(serial_master_buffer));
-        matrix_scan_quantum();
-    }
-    return 1;
-}
-
-
-uint8_t matrix_master_scan(void) {
-
-    int ret = _matrix_scan();
-    int mchanged = 1;
-
-#ifndef KEYBOARD_helix_rev1
-    int offset = (isLeftHand) ? 0 : ROWS_PER_HAND;
-
-#ifdef USE_MATRIX_I2C
-//    for (int i = 0; i < ROWS_PER_HAND; ++i) {
-        /* i2c_slave_buffer[i] = matrix[offset+i]; */
-//        i2c_slave_buffer[i] = matrix[offset+i];
-//    }
-#else // USE_SERIAL
-  #ifdef SERIAL_USE_MULTI_TRANSACTION
-    mchanged = memcmp((void *)serial_master_buffer,
-		      &matrix[offset], sizeof(serial_master_buffer));
-  #endif
-    memcpy((void *)serial_master_buffer,
-	   &matrix[offset], sizeof(serial_master_buffer));
-#endif
-#endif
-
-#ifdef USE_MATRIX_I2C
-    if( i2c_transaction() ) {
-#else // USE_SERIAL
-    if( serial_transaction(mchanged) ) {
-#endif
-        // turn on the indicator led when halves are disconnected
-        writePinLow(D5);
-
-        error_count++;
-
-        if (error_count > ERROR_DISCONNECT_COUNT) {
-            // reset other half if disconnected
-            int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0;
-            for (int i = 0; i < ROWS_PER_HAND; ++i) {
-                matrix[slaveOffset+i] = 0;
-            }
-        }
-    } else {
-        // turn off the indicator led on no error
-        writePinHigh(D5);
-        error_count = 0;
-    }
-    matrix_scan_quantum();
-    return ret;
-}
-
-void matrix_slave_scan(void) {
-    _matrix_scan();
-
-    int offset = (isLeftHand) ? 0 : ROWS_PER_HAND;
-
-#ifdef USE_MATRIX_I2C
-    for (int i = 0; i < ROWS_PER_HAND; ++i) {
-        /* i2c_slave_buffer[i] = matrix[offset+i]; */
-        i2c_slave_buffer[i] = matrix[offset+i];
-    }
-#else // USE_SERIAL
-  #ifdef SERIAL_USE_MULTI_TRANSACTION
-    int change = 0;
-  #endif
-    for (int i = 0; i < ROWS_PER_HAND; ++i) {
-  #ifdef SERIAL_USE_MULTI_TRANSACTION
-        if( serial_slave_buffer[i] != matrix[offset+i] )
-	    change = 1;
-  #endif
-        serial_slave_buffer[i] = matrix[offset+i];
-    }
-  #ifdef SERIAL_USE_MULTI_TRANSACTION
-    slave_buffer_change_count += change;
-  #endif
-#endif
-}
-
-inline
-bool matrix_is_on(uint8_t row, uint8_t col)
-{
-    return (matrix[row] & ((matrix_row_t)1<<col));
-}
-
-inline
-matrix_row_t matrix_get_row(uint8_t row)
-{
-    return matrix[row];
-}
-
-void matrix_print(void)
-{
-    print("\nr/c 0123456789ABCDEF\n");
-    for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
-        print_hex8(row); print(": ");
-        print_bin_reverse16(matrix_get_row(row));
-        print("\n");
-    }
-}
-
-static void  init_cols(void)
-{
-    for(int x = 0; x < MATRIX_COLS; x++) {
-        _SFR_IO8((col_pins[x] >> 4) + 1) &=  ~_BV(col_pins[x] & 0xF);
-        _SFR_IO8((col_pins[x] >> 4) + 2) |= _BV(col_pins[x] & 0xF);
-    }
-}
-
-static matrix_row_t read_cols(void)
-{
-    matrix_row_t result = 0;
-    for(int x = 0; x < MATRIX_COLS; x++) {
-        result |= (_SFR_IO8(col_pins[x] >> 4) & _BV(col_pins[x] & 0xF)) ? 0 : (1 << x);
-    }
-    return result;
-}
-
-static void unselect_rows(void)
-{
-    for(int x = 0; x < ROWS_PER_HAND; x++) {
-        _SFR_IO8((row_pins[x] >> 4) + 1) &=  ~_BV(row_pins[x] & 0xF);
-        _SFR_IO8((row_pins[x] >> 4) + 2) |= _BV(row_pins[x] & 0xF);
-    }
-}
-
-static void select_row(uint8_t row)
-{
-    _SFR_IO8((row_pins[row] >> 4) + 1) |=  _BV(row_pins[row] & 0xF);
-    _SFR_IO8((row_pins[row] >> 4) + 2) &= ~_BV(row_pins[row] & 0xF);
-}
diff --git a/keyboards/helix/rev2/custom/split_scomm.c b/keyboards/helix/rev2/custom/split_scomm.c
deleted file mode 100644
index 378781b98c..0000000000
--- a/keyboards/helix/rev2/custom/split_scomm.c
+++ /dev/null
@@ -1,92 +0,0 @@
-#ifdef USE_SERIAL
-#ifdef SERIAL_USE_MULTI_TRANSACTION
-/* --- USE flexible API (using multi-type transaction function) --- */
-
-#include <stdbool.h>
-#include <stdint.h>
-#include <stddef.h>
-#include "split_scomm.h"
-#include "serial.h"
-#ifdef CONSOLE_ENABLE
-  #include "print.h"
-#endif
-
-uint8_t volatile serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH] = {0};
-uint8_t volatile serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH] = {0};
-uint8_t volatile status_com = 0;
-uint8_t volatile status1 = 0;
-uint8_t slave_buffer_change_count = 0;
-uint8_t s_change_old = 0xff;
-uint8_t s_change_new = 0xff;
-
-SSTD_t transactions[] = {
-#define GET_SLAVE_STATUS 0
-    /* master buffer not changed, only recive slave_buffer_change_count */
-    { (uint8_t *)&status_com,
-      0, NULL,
-      sizeof(slave_buffer_change_count), &slave_buffer_change_count,
-    },
-#define PUT_MASTER_GET_SLAVE_STATUS 1
-    /* master buffer changed need send, and recive slave_buffer_change_count  */
-    { (uint8_t *)&status_com,
-      sizeof(serial_master_buffer), (uint8_t *)serial_master_buffer,
-      sizeof(slave_buffer_change_count), &slave_buffer_change_count,
-    },
-#define GET_SLAVE_BUFFER 2
-    /* recive serial_slave_buffer */
-    { (uint8_t *)&status1,
-      0, NULL,
-      sizeof(serial_slave_buffer), (uint8_t *)serial_slave_buffer
-    }
-};
-
-void serial_master_init(void)
-{
-    soft_serial_initiator_init(transactions, TID_LIMIT(transactions));
-}
-
-void serial_slave_init(void)
-{
-    soft_serial_target_init(transactions, TID_LIMIT(transactions));
-}
-
-// 0 => no error
-// 1 => slave did not respond
-// 2 => checksum error
-int serial_update_buffers(int master_update)
-{
-    int status, smatstatus;
-    static int need_retry = 0;
-
-    if( s_change_old != s_change_new ) {
-        smatstatus = soft_serial_transaction(GET_SLAVE_BUFFER);
-        if( smatstatus == TRANSACTION_END ) {
-            s_change_old = s_change_new;
-#ifdef CONSOLE_ENABLE
-            uprintf("slave matrix = %b %b %b %b %b\n",
-                    serial_slave_buffer[0], serial_slave_buffer[1],
-                    serial_slave_buffer[2], serial_slave_buffer[3],
-                    serial_slave_buffer[4] );
-#endif
-        }
-    } else {
-        // serial_slave_buffer dosen't change
-        smatstatus = TRANSACTION_END; // dummy status
-    }
-
-    if( !master_update && !need_retry) {
-        status = soft_serial_transaction(GET_SLAVE_STATUS);
-    } else {
-        status = soft_serial_transaction(PUT_MASTER_GET_SLAVE_STATUS);
-    }
-    if( status == TRANSACTION_END ) {
-        s_change_new = slave_buffer_change_count;
-        need_retry = 0;
-    } else {
-        need_retry = 1;
-    }
-    return smatstatus;
-}
-
-#endif // SERIAL_USE_MULTI_TRANSACTION
-#endif /* USE_SERIAL */
diff --git a/keyboards/helix/rev2/custom/split_scomm.h b/keyboards/helix/rev2/custom/split_scomm.h
deleted file mode 100644
index 16887eb74f..0000000000
--- a/keyboards/helix/rev2/custom/split_scomm.h
+++ /dev/null
@@ -1,21 +0,0 @@
-#pragma once
-
-#ifndef SERIAL_USE_MULTI_TRANSACTION
-/* --- USE Simple API (OLD API, compatible with let's split serial.c) --- */
-#include "serial.h"
-
-#else
-/* --- USE flexible API (using multi-type transaction function) --- */
-// Buffers for master - slave communication
-#define SERIAL_SLAVE_BUFFER_LENGTH MATRIX_ROWS/2
-#define SERIAL_MASTER_BUFFER_LENGTH MATRIX_ROWS/2
-
-extern volatile uint8_t serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH];
-extern volatile uint8_t serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH];
-extern uint8_t slave_buffer_change_count;
-
-void serial_master_init(void);
-void serial_slave_init(void);
-int serial_update_buffers(int master_changed);
-
-#endif
diff --git a/keyboards/helix/rev2/custom/split_util.c b/keyboards/helix/rev2/custom/split_util.c
deleted file mode 100644
index ab40315487..0000000000
--- a/keyboards/helix/rev2/custom/split_util.c
+++ /dev/null
@@ -1,109 +0,0 @@
-#include <avr/io.h>
-#include <avr/wdt.h>
-#include <avr/power.h>
-#include <avr/interrupt.h>
-#include <util/delay.h>
-#include <avr/eeprom.h>
-#include "split_util.h"
-#include "matrix.h"
-#include "keyboard.h"
-#include "wait.h"
-
-#ifdef USE_MATRIX_I2C
-#  include "i2c.h"
-#else
-#  include "split_scomm.h"
-#endif
-
-#ifdef EE_HANDS
-#    include "eeconfig.h"
-#endif
-
-#ifndef SPLIT_USB_TIMEOUT
-#    define SPLIT_USB_TIMEOUT 2000
-#endif
-
-#ifndef SPLIT_USB_TIMEOUT_POLL
-#    define SPLIT_USB_TIMEOUT_POLL 10
-#endif
-
-volatile bool isLeftHand = true;
-
-bool waitForUsb(void) {
-    for (uint8_t i = 0; i < (SPLIT_USB_TIMEOUT / SPLIT_USB_TIMEOUT_POLL); i++) {
-        // This will return true if a USB connection has been established
-        if (UDADDR & _BV(ADDEN)) {
-            return true;
-        }
-        wait_ms(SPLIT_USB_TIMEOUT_POLL);
-    }
-
-    // Avoid NO_USB_STARTUP_CHECK - Disable USB as the previous checks seem to enable it somehow
-    (USBCON &= ~(_BV(USBE) | _BV(OTGPADE)));
-
-    return false;
-}
-
-
-bool is_keyboard_left(void) {
-#if defined(SPLIT_HAND_PIN)
-    // Test pin SPLIT_HAND_PIN for High/Low, if low it's right hand
-    setPinInput(SPLIT_HAND_PIN);
-    return readPin(SPLIT_HAND_PIN);
-#elif defined(EE_HANDS)
-    return eeconfig_read_handedness();
-#elif defined(MASTER_RIGHT)
-    return !is_helix_master();
-#endif
-
-    return is_helix_master();
-}
-
-bool is_helix_master(void) {
-    static enum { UNKNOWN, MASTER, SLAVE } usbstate = UNKNOWN;
-
-    // only check once, as this is called often
-    if (usbstate == UNKNOWN) {
-#if defined(SPLIT_USB_DETECT)
-        usbstate = waitForUsb() ? MASTER : SLAVE;
-#elif defined(__AVR__)
-        USBCON |= (1 << OTGPADE);  // enables VBUS pad
-        wait_us(5);
-
-        usbstate = (USBSTA & (1 << VBUS)) ? MASTER : SLAVE;  // checks state of VBUS
-#else
-        usbstate = MASTER;
-#endif
-    }
-
-    return (usbstate == MASTER);
-}
-
-static void keyboard_master_setup(void) {
-
-#ifdef USE_MATRIX_I2C
-    i2c_master_init();
-#else
-    serial_master_init();
-#endif
-}
-
-static void keyboard_slave_setup(void) {
-
-#ifdef USE_MATRIX_I2C
-    i2c_slave_init(SLAVE_I2C_ADDRESS);
-#else
-    serial_slave_init();
-#endif
-}
-
-void split_keyboard_setup(void) {
-   isLeftHand = is_keyboard_left();
-
-   if (is_helix_master()) {
-      keyboard_master_setup();
-   } else {
-      keyboard_slave_setup();
-   }
-   sei();
-}
diff --git a/keyboards/helix/rev2/custom/split_util.h b/keyboards/helix/rev2/custom/split_util.h
deleted file mode 100644
index 3b1d4249f5..0000000000
--- a/keyboards/helix/rev2/custom/split_util.h
+++ /dev/null
@@ -1,21 +0,0 @@
-#pragma once
-
-#ifdef SPLIT_KEYBOARD
-#   error This is helix local split_util.h.
-#   error This header file is used only when SPLIT_KEYBOARD=no.
-#endif
-
-#include <stdbool.h>
-#include "eeconfig.h"
-
-#define SLAVE_I2C_ADDRESS           0x32
-
-extern volatile bool isLeftHand;
-
-// slave version of matix scan, defined in matrix.c
-void matrix_slave_scan(void);
-
-void split_keyboard_setup(void);
-bool is_helix_master(void);
-
-void matrix_master_OLED_init (void);
diff --git a/keyboards/helix/rev2/keymaps/default/oled_display.c b/keyboards/helix/rev2/keymaps/default/oled_display.c
index 824d2e4d86..ad5558869f 100644
--- a/keyboards/helix/rev2/keymaps/default/oled_display.c
+++ b/keyboards/helix/rev2/keymaps/default/oled_display.c
@@ -18,10 +18,6 @@
 #include <string.h>
 #include QMK_KEYBOARD_H
 
-#ifdef SSD1306OLED
-  #include "ssd1306.h"
-#endif
-
 // Each layer gets a name for readability, which is then used in the keymap matrix below.
 // The underscores don't mean anything - you can have a layer called STUFF or any other name.
 // Layer names don't all need to be of the same length, obviously, and you can also skip them
@@ -35,10 +31,15 @@ enum layer_number {
     _ADJUST
 };
 
-//SSD1306 OLED update loop, make sure to add #define SSD1306OLED in config.h
-#if defined(SSD1306OLED) || defined(OLED_ENABLE)
+//assign the right code to your layers for OLED display
+#define L_BASE 0
+#define L_LOWER (1<<_LOWER)
+#define L_RAISE (1<<_RAISE)
+#define L_ADJUST (1<<_ADJUST)
+#define L_ADJUST_TRI (L_ADJUST|L_RAISE|L_LOWER)
 
-#    if defined(OLED_ENABLE)
+//OLED update loop
+#ifdef OLED_ENABLE
 oled_rotation_t oled_init_user(oled_rotation_t rotation) {
     if (is_keyboard_master()) {
         return OLED_ROTATION_0;
@@ -46,12 +47,120 @@ oled_rotation_t oled_init_user(oled_rotation_t rotation) {
         return OLED_ROTATION_180;
     }
 }
-#    else
-#        define oled_write(data,flag)    matrix_write(matrix, data)
-#        define oled_write_P(data,flag)  matrix_write_P(matrix, data)
+
+static void render_rgbled_status(bool full) {
+#    ifdef RGBLIGHT_ENABLE
+    char buf[30];
+    if (RGBLIGHT_MODES > 1 && rgblight_is_enabled()) {
+        if (full) {
+            snprintf(buf, sizeof(buf), " LED %2d: %d,%d,%d ",
+                     rgblight_get_mode(),
+                     rgblight_get_hue()/RGBLIGHT_HUE_STEP,
+                     rgblight_get_sat()/RGBLIGHT_SAT_STEP,
+                     rgblight_get_val()/RGBLIGHT_VAL_STEP);
+        } else {
+            snprintf(buf, sizeof(buf), "[%2d] ", rgblight_get_mode());
+        }
+        oled_write(buf, false);
+    }
 #    endif
+}
+
+static void render_layer_status(void) {
+  // Define layers here, Have not worked out how to have text displayed for each layer. Copy down the number you see and add a case for it below
+    char buf[10];
+    oled_write_P(PSTR("Layer: "), false);
+    switch (layer_state) {
+    case L_BASE:
+        oled_write_P(PSTR("Default"), false);
+        break;
+    case L_RAISE:
+        oled_write_P(PSTR("Raise"), false);
+        break;
+    case L_LOWER:
+        oled_write_P(PSTR("Lower"), false);
+        break;
+    case L_ADJUST:
+    case L_ADJUST_TRI:
+        oled_write_P(PSTR("Adjust"), false);
+        break;
+    default:
+        oled_write_P(PSTR("Undef-"), false);
+        snprintf(buf,sizeof(buf), "%ld", layer_state);
+        oled_write(buf, false);
+    }
+    oled_write_P(PSTR("\n"), false);
+}
+
+void render_status(void) {
+  // Render to mode icon
+    static const char os_logo[][2][3] PROGMEM = {{{0x95,0x96,0},{0xb5,0xb6,0}},{{0x97,0x98,0},{0xb7,0xb8,0}}};
+    if (is_mac_mode()) {
+        oled_write_P(os_logo[0][0], false);
+        oled_write_P(PSTR("\n"), false);
+        oled_write_P(os_logo[0][1], false);
+    } else {
+        oled_write_P(os_logo[1][0], false);
+        oled_write_P(PSTR("\n"), false);
+        oled_write_P(os_logo[1][1], false);
+    }
+
+    oled_write_P(PSTR(" "), false);
+    render_layer_status();
+
+    // Host Keyboard LED Status
+    led_t led_state = host_keyboard_led_state();
+    oled_write_P(led_state.num_lock ? PSTR("NUMLOCK") : PSTR("       "), false);
+    oled_write_P(led_state.caps_lock ? PSTR("CAPS") : PSTR("    "), false);
+    oled_write_P(led_state.scroll_lock ? PSTR("SCLK") : PSTR("    "), false);
+    oled_advance_page(true);
+    render_rgbled_status(true);
+    oled_write_P(PSTR("\n"), false);
+}
+
+bool oled_task_user(void) {
+
+#        if DEBUG_TO_SCREEN
+    if (debug_enable) {
+        return;
+    }
+#        endif
+
+    if (is_keyboard_master()) {
+        render_status();
+    } else {
+        render_helix_logo();
+        render_rgbled_status(false);
+        render_layer_status();
+    }
+    return false;
+}
+#endif // end of OLED_ENABLE
+
+//SSD1306 OLED update loop
+/*
+    The following code is left as a sample to help you transition from SSD1306OLED to OLED_ENABLE.
+
+    * `matrix_write(matrix, data)` is replaced by `oled_write(data, false)`.
+    * `matrix_write_P(matrix, data)` is replaced by `oled_write_P(data, false)`.
+    * It is no longer necessary to call `iota_gfx_task()`.
+    * `matrix_update()` are no longer needed.
+    * `iota_gfx_task_user()` is no longer needed. Instead, `bool oled_task_user(void)` is provided.
+
+    以下のコードは、SSD1306OLED から OLED_ENABLE に移行する助けになるようにサンプルとして残してあります。
+
+    * `matrix_write(matrix, data)` は、`oled_write(data, false)` に書き換えます。
+    * `matrix_write_P(matrix, data)` は、`oled_write_P(data, false)` に書き換えます。
+    * `iota_gfx_task()` を呼び出す必要はなくなります。
+    * `matrix_update()` は不要になります。
+    * `iota_gfx_task_user()` は不要になります。代りに `bool oled_task_user(void)` を用意します。
+ */
+
+#ifdef SSD1306OLED
+#include "ssd1306.h"
+#define oled_write(data,flag)    matrix_write(matrix, data)
+#define oled_write_P(data,flag)  matrix_write_P(matrix, data)
 
-#    ifdef SSD1306OLED
 void matrix_scan_user(void) {
     iota_gfx_task();  // this is what updates the display continuously
 }
@@ -63,16 +172,7 @@ void matrix_update(struct CharacterMatrix *dest,
         dest->dirty = true;
     }
 }
-#    endif
-
-//assign the right code to your layers for OLED display
-#define L_BASE 0
-#define L_LOWER (1<<_LOWER)
-#define L_RAISE (1<<_RAISE)
-#define L_ADJUST (1<<_ADJUST)
-#define L_ADJUST_TRI (L_ADJUST|L_RAISE|L_LOWER)
 
-#    ifdef SSD1306OLED
 static void render_logo(struct CharacterMatrix *matrix) {
 
     static const char helix_logo[] PROGMEM ={
@@ -82,13 +182,8 @@ static void render_logo(struct CharacterMatrix *matrix) {
         0};
     oled_write_P(helix_logo, false);
 }
-#    endif
 
-#    ifdef SSD1306OLED
 static void render_rgbled_status(bool full, struct CharacterMatrix *matrix) {
-#    else
-static void render_rgbled_status(bool full) {
-#    endif
 #    ifdef RGBLIGHT_ENABLE
     char buf[30];
     if (RGBLIGHT_MODES > 1 && rgblight_is_enabled()) {
@@ -106,11 +201,7 @@ static void render_rgbled_status(bool full) {
 #    endif
 }
 
-#    ifdef SSD1306OLED
 static void render_layer_status(struct CharacterMatrix *matrix) {
-#    else
-static void render_layer_status(void) {
-#    endif
   // Define layers here, Have not worked out how to have text displayed for each layer. Copy down the number you see and add a case for it below
     char buf[10];
     oled_write_P(PSTR("Layer: "), false);
@@ -136,11 +227,7 @@ static void render_layer_status(void) {
     oled_write_P(PSTR("\n"), false);
 }
 
-#    ifdef SSD1306OLED
 void render_status(struct CharacterMatrix *matrix) {
-#    else
-void render_status(void) {
-#    endif
   // Render to mode icon
     static const char os_logo[][2][3] PROGMEM = {{{0x95,0x96,0},{0xb5,0xb6,0}},{{0x97,0x98,0},{0xb7,0xb8,0}}};
     if (is_mac_mode()) {
@@ -154,11 +241,7 @@ void render_status(void) {
     }
 
     oled_write_P(PSTR(" "), false);
-#    ifdef SSD1306OLED
     render_layer_status(matrix);
-#    else
-    render_layer_status();
-#    endif
 
     // Host Keyboard LED Status
     led_t led_state = host_keyboard_led_state();
@@ -166,35 +249,28 @@ void render_status(void) {
     oled_write_P(led_state.caps_lock ? PSTR("CAPS") : PSTR("    "), false);
     oled_write_P(led_state.scroll_lock ? PSTR("SCLK") : PSTR("    "), false);
     oled_write_P(PSTR("\n"), false);
-#    ifdef SSD1306OLED
     render_rgbled_status(true, matrix);
-#    else
-    render_rgbled_status(true);
-    oled_write_P(PSTR("\n"), false);
-#    endif
 }
 
-
-#    ifdef SSD1306OLED
-#        if OLED_UPDATE_INTERVAL > 0
+#    if OLED_UPDATE_INTERVAL > 0
 uint16_t oled_update_timeout;
-#        endif
+#    endif
 
 void iota_gfx_task_user(void) {
     struct CharacterMatrix matrix;
 
-#        if DEBUG_TO_SCREEN
+#    if DEBUG_TO_SCREEN
     if (debug_enable) {
         return;
     }
-#        endif
+#    endif
 
-#if      OLED_UPDATE_INTERVAL > 0
+#    if OLED_UPDATE_INTERVAL > 0
     if (timer_elapsed(oled_update_timeout) < OLED_UPDATE_INTERVAL) {
         return;
     }
     oled_update_timeout = timer_read();
-#endif
+#    endif
     matrix_clear(&matrix);
     if (is_keyboard_master()) {
         render_status(&matrix);
@@ -205,23 +281,5 @@ void iota_gfx_task_user(void) {
     }
     matrix_update(&display, &matrix);
 }
-#    else
-bool oled_task_user(void) {
 
-#        if DEBUG_TO_SCREEN
-    if (debug_enable) {
-        return;
-    }
-#        endif
-
-    if (is_keyboard_master()) {
-        render_status();
-    } else {
-        render_helix_logo();
-        render_rgbled_status(false);
-        render_layer_status();
-    }
-    return false;
-}
-#    endif
-#endif
+#endif // end of SSD1306OLED
diff --git a/keyboards/helix/rev2/local_features.mk b/keyboards/helix/rev2/local_features.mk
index c6f818bf39..34fd699a65 100644
--- a/keyboards/helix/rev2/local_features.mk
+++ b/keyboards/helix/rev2/local_features.mk
@@ -40,24 +40,6 @@ ifneq ($(strip $(HELIX)),)
     SHOW_HELIX_OPTIONS = yes
 endif
 
-ifneq ($(strip $(SPLIT_KEYBOARD)), yes)
-  # In the very near future, all keymaps will be compatible with split_common and this block will be removed.
-  SRC += local_drivers/serial.c
-  KEYBOARD_PATHS += $(HELIX_TOP_DIR)/local_drivers
-
-  # A workaround until #7089 is merged.
-  #   serial.c must not be compiled with the -lto option.
-  #   The current LIB_SRC has a side effect with the -fno-lto option, so use it.
-  LIB_SRC += local_drivers/serial.c
-
-  CUSTOM_MATRIX = yes
-
-  SRC += rev2/custom/matrix.c
-  SRC += rev2/custom/split_util.c
-  SRC += rev2/custom/split_scomm.c
-  KEYBOARD_PATHS += $(HELIX_TOP_DIR)/rev2/custom
-endif
-
 ########
 # convert Helix-specific options (that represent combinations of standard options)
 #   into QMK standard options.
@@ -88,44 +70,17 @@ ifeq ($(strip $(LED_ANIMATIONS)), yes)
 endif
 
 ifeq ($(strip $(OLED_ENABLE)), yes)
-    ifeq ($(strip $(OLED_SELECT)),core)
-        OLED_ENABLE = yes
-        OLED_DRIVER = SSD1306
-        ifeq ($(strip $(LOCAL_GLCDFONT)), yes)
-           OPT_DEFS += -DOLED_FONT_H=\<helixfont.h\>
-        else
-           OPT_DEFS += -DOLED_FONT_H=\"common/glcdfont.c\"
-        endif
+    OLED_DRIVER = SSD1306
+    ifeq ($(strip $(LOCAL_GLCDFONT)), yes)
+       OPT_DEFS += -DOLED_FONT_H=\<helixfont.h\>
     else
-
-        # In the very near future, all keymaps will be compatible with QMK standard oled_driver and this block will be removed.
-        ifeq ($(strip $(SPLIT_KEYBOARD)), yes)
-            $(info Helix/rev2: The following combinations are not supported.)
-            $(info - SPLIT_KEYBOARD = $(SPLIT_KEYBOARD)) # yes
-            $(info - OLED_ENABLE    = $(OLED_ENABLE))    # yes
-            $(info - OLED_SELECT    = $(OLED_SELECT))    # local
-            $(info Force : OLED_ENABLE = no)
-            $(info .)
-            OLED_ENABLE = no
-        endif
-        ifeq ($(strip $(OLED_ENABLE)), yes)
-            OLED_ENABLE = no # disable OLED in TOP/common_features.mk
-            OLED_LOCAL_ENABLE = yes
-            SRC += local_drivers/i2c.c
-            SRC += local_drivers/ssd1306.c
-            KEYBOARD_PATHS += $(HELIX_TOP_DIR)/local_drivers
-            OPT_DEFS += -DOLED_LOCAL_ENABLE
-            ifeq ($(strip $(LOCAL_GLCDFONT)), yes)
-                OPT_DEFS += -DLOCAL_GLCDFONT
-            endif
-        endif
+       OPT_DEFS += -DOLED_FONT_H=\"common/glcdfont.c\"
     endif
 endif
 
 ifneq ($(strip $(SHOW_HELIX_OPTIONS)),)
   $(info Helix Spacific Build Options)
   $(info -  OLED_ENABLE          = $(OLED_ENABLE))
-  $(info -  OLED_SELECT          = $(OLED_SELECT))
   $(info -  LED_BACK_ENABLE      = $(LED_BACK_ENABLE))
   $(info -  LED_UNDERGLOW_ENABLE = $(LED_UNDERGLOW_ENABLE))
   $(info -  LED_ANIMATIONS       = $(LED_ANIMATIONS))
diff --git a/keyboards/helix/rev2/override_helix_options.mk b/keyboards/helix/rev2/override_helix_options.mk-maintenance
index 56dee8ce78..56dee8ce78 100644
--- a/keyboards/helix/rev2/override_helix_options.mk
+++ b/keyboards/helix/rev2/override_helix_options.mk-maintenance
diff --git a/keyboards/helix/rev2/rev2.c b/keyboards/helix/rev2/rev2.c
index ba29f3c7de..2bbe9a28e2 100644
--- a/keyboards/helix/rev2/rev2.c
+++ b/keyboards/helix/rev2/rev2.c
@@ -20,14 +20,6 @@
 //  for the old keymap.c.
 uint8_t is_master = false;
 
-#ifdef SSD1306OLED
-#include "ssd1306.h"
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-	return process_record_gfx(keycode,record) && process_record_user(keycode, record);
-}
-#endif
-
 bool is_mac_mode(void) {
     // This is the opposite of the QMK standard, but we'll leave it for backwards compatibility.
     return keymap_config.swap_lalt_lgui == false;
@@ -59,12 +51,6 @@ void keyboard_post_init_kb(void) {
     keyboard_post_init_user();
 }
 
-#if defined(SPLIT_KEYBOARD) && defined(SSD1306OLED)
-void matrix_slave_scan_user(void) {
-    matrix_scan_user();
-}
-#endif
-
 #ifdef OLED_ENABLE
 void render_helix_logo(void) {
     static const char helix_logo[] PROGMEM ={
@@ -82,7 +68,7 @@ bool oled_task_kb(void) {
         oled_write_P(led_state.num_lock ? PSTR("NUMLOCK") : PSTR("       "), false);
         oled_wri