diff options
Diffstat (limited to 'keyboards/helix/pico')
| -rw-r--r-- | keyboards/helix/pico/config.h | 10 | ||||
| -rw-r--r-- | keyboards/helix/pico/keymaps/biacco/keymap.c | 35 | ||||
| -rw-r--r-- | keyboards/helix/pico/keymaps/biacco/rules.mk | 6 | ||||
| -rw-r--r-- | keyboards/helix/pico/keymaps/default/keymap.c | 135 | ||||
| -rw-r--r-- | keyboards/helix/pico/keymaps/default/readme.md | 6 | ||||
| -rw-r--r-- | keyboards/helix/pico/keymaps/default/readme_jp.md | 14 | ||||
| -rw-r--r-- | keyboards/helix/pico/keymaps/default/rules.mk | 6 | ||||
| -rw-r--r-- | keyboards/helix/pico/keymaps/mtei/keymap.c | 163 | ||||
| -rw-r--r-- | keyboards/helix/pico/keymaps/mtei/rules.mk | 6 | ||||
| -rw-r--r-- | keyboards/helix/pico/matrix.c | 342 | ||||
| -rw-r--r-- | keyboards/helix/pico/override_helix_options.mk-maintenance | 42 | ||||
| -rw-r--r-- | keyboards/helix/pico/pico.c | 29 | ||||
| -rw-r--r-- | keyboards/helix/pico/pico.h | 20 | ||||
| -rw-r--r-- | keyboards/helix/pico/post_rules.mk | 138 | ||||
| -rw-r--r-- | keyboards/helix/pico/qmk_conf/rules.mk | 2 | ||||
| -rw-r--r-- | keyboards/helix/pico/rules.mk | 4 | ||||
| -rw-r--r-- | keyboards/helix/pico/split_util.c | 104 | ||||
| -rw-r--r-- | keyboards/helix/pico/split_util.h | 16 |
18 files changed, 165 insertions, 913 deletions
diff --git a/keyboards/helix/pico/config.h b/keyboards/helix/pico/config.h index b01fd3a001..ea2ce8c941 100644 --- a/keyboards/helix/pico/config.h +++ b/keyboards/helix/pico/config.h @@ -1,6 +1,7 @@ /* Copyright 2012 Jun Wako <wakojun@gmail.com> Copyright 2015 Jack Humbert +Copyright 2018 MakotoKurauchi This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by @@ -42,12 +43,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. // #define MASTER_RIGHT // #define EE_HANDS -// Helix keyboard OLED support -// see ./rules.mk: OLED_ENABLE=yes or no -#ifdef OLED_ENABLE - #define SSD1306OLED -#endif - /* key matrix size */ // Rows are doubled-up #define MATRIX_ROWS 8 @@ -114,8 +109,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #if defined(RGBLIGHT_ENABLE) && !defined(IOS_DEVICE_ENABLE) // USB_MAX_POWER_CONSUMPTION value for Helix keyboard -// 120 RGBoff, OLEDoff -// 120 OLED +// 120 RGBoff // 330 RGB 6 // 300 RGB 32 // 310 OLED & RGB 32 diff --git a/keyboards/helix/pico/keymaps/biacco/keymap.c b/keyboards/helix/pico/keymaps/biacco/keymap.c index a1d041c022..aa196c7e6a 100644 --- a/keyboards/helix/pico/keymaps/biacco/keymap.c +++ b/keyboards/helix/pico/keymaps/biacco/keymap.c @@ -1,24 +1,19 @@ +/* Copyright 2018 Biacco42 + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ #include QMK_KEYBOARD_H -#include "bootloader.h" -#ifdef PROTOCOL_LUFA -#include "lufa.h" -#include "split_util.h" -#endif -#ifdef AUDIO_ENABLE - #include "audio.h" -#endif -#ifdef SSD1306OLED - #include "ssd1306.h" -#endif - -extern keymap_config_t keymap_config; - -#ifdef RGBLIGHT_ENABLE -//Following line allows macro to read current RGB settings -extern rgblight_config_t rgblight_config; -#endif - -extern uint8_t is_master; // Each layer gets a name for readability, which is then used in the keymap matrix below. // The underscores don't mean anything - you can have a layer called STUFF or any other name. diff --git a/keyboards/helix/pico/keymaps/biacco/rules.mk b/keyboards/helix/pico/keymaps/biacco/rules.mk index 993ade2673..d971359461 100644 --- a/keyboards/helix/pico/keymaps/biacco/rules.mk +++ b/keyboards/helix/pico/keymaps/biacco/rules.mk @@ -10,10 +10,8 @@ AUDIO_ENABLE = yes # Audio output on port B5 LTO_ENABLE = no # if firmware size over limit, try this option # Helix Spacific Build Options -# you can uncomment and edit follows 6 Variables -# jp: 以下の6つの変数を必要に応じて編集し、コメントアウトをはずします。 -# OLED_ENABLE = no # OLED_ENABLE -# LOCAL_GLCDFONT = no # use each keymaps "helixfont.h" insted of "common/glcdfont.c" +# you can uncomment and edit follows 4 Variables +# jp: 以下の4つの変数を必要に応じて編集し、コメントアウトをはずします。 # LED_BACK_ENABLE = no # LED backlight (Enable WS2812 RGB underlight.) # LED_UNDERGLOW_ENABLE = no # LED underglow (Enable WS2812 RGB underlight.) LED_ANIMATIONS = no # LED animations diff --git a/keyboards/helix/pico/keymaps/default/keymap.c b/keyboards/helix/pico/keymaps/default/keymap.c index f23ab85761..11ee30258c 100644 --- a/keyboards/helix/pico/keymaps/default/keymap.c +++ b/keyboards/helix/pico/keymaps/default/keymap.c @@ -1,24 +1,25 @@ +/* Copyright 2018 MakotoKurauchi + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ #include QMK_KEYBOARD_H -#include "bootloader.h" -#ifdef PROTOCOL_LUFA -#include "lufa.h" -#include "split_util.h" -#endif -#ifdef AUDIO_ENABLE - #include "audio.h" -#endif -#ifdef SSD1306OLED - #include "ssd1306.h" -#endif - #ifdef RGBLIGHT_ENABLE //Following line allows macro to read current RGB settings extern rgblight_config_t rgblight_config; #endif -extern uint8_t is_master; - // Each layer gets a name for readability, which is then used in the keymap matrix below. // The underscores don't mean anything - you can have a layer called STUFF or any other name. // Layer names don't all need to be of the same length, obviously, and you can also skip them @@ -334,10 +335,6 @@ void matrix_init_user(void) { #ifdef RGBLIGHT_ENABLE RGB_current_mode = rgblight_config.mode; #endif - //SSD1306 OLED init, make sure to add #define SSD1306OLED in config.h - #ifdef SSD1306OLED - iota_gfx_init(!has_usb()); // turns on the display - #endif } @@ -365,105 +362,3 @@ void music_scale_user(void) } #endif - - -//SSD1306 OLED update loop, make sure to add #define SSD1306OLED in config.h -#ifdef SSD1306OLED - -void matrix_scan_user(void) { - iota_gfx_task(); // this is what updates the display continuously -} - -void matrix_update(struct CharacterMatrix *dest, - const struct CharacterMatrix *source) { - if (memcmp(dest->display, source->display, sizeof(dest->display))) { - memcpy(dest->display, source->display, sizeof(dest->display)); - dest->dirty = true; - } -} - -//assign the right code to your layers for OLED display -#define L_BASE 0 -#define L_LOWER (1<<_LOWER) -#define L_RAISE (1<<_RAISE) -#define L_ADJUST (1<<_ADJUST) -#define L_ADJUST_TRI (L_ADJUST|L_RAISE|L_LOWER) - -static void render_logo(struct CharacterMatrix *matrix) { - - static char logo[]={ - 0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8a,0x8b,0x8c,0x8d,0x8e,0x8f,0x90,0x91,0x92,0x93,0x94, - 0xa0,0xa1,0xa2,0xa3,0xa4,0xa5,0xa6,0xa7,0xa8,0xa9,0xaa,0xab,0xac,0xad,0xae,0xaf,0xb0,0xb1,0xb2,0xb3,0xb4, - 0xc0,0xc1,0xc2,0xc3,0xc4,0xc5,0xc6,0xc7,0xc8,0xc9,0xca,0xcb,0xcc,0xcd,0xce,0xcf,0xd0,0xd1,0xd2,0xd3,0xd4, - 0}; - matrix_write(matrix, logo); - //matrix_write_P(&matrix, PSTR(" Split keyboard kit")); -} - - - -void render_status(struct CharacterMatrix *matrix) { - - // Render to mode icon - static char logo[][2][3]={{{0x95,0x96,0},{0xb5,0xb6,0}},{{0x97,0x98,0},{0xb7,0xb8,0}}}; - if(keymap_config.swap_lalt_lgui==false){ - matrix_write(matrix, logo[0][0]); - matrix_write_P(matrix, PSTR("\n")); - matrix_write(matrix, logo[0][1]); - }else{ - matrix_write(matrix, logo[1][0]); - matrix_write_P(matrix, PSTR("\n")); - matrix_write(matrix, logo[1][1]); - } - - // Define layers here, Have not worked out how to have text displayed for each layer. Copy down the number you see and add a case for it below - char buf[40]; - snprintf(buf,sizeof(buf), "Undef-%ld", layer_state); - matrix_write_P(matrix, PSTR("\nLayer: ")); - switch (layer_state) { - case L_BASE: - matrix_write_P(matrix, PSTR("Default")); - break; - case L_RAISE: - matrix_write_P(matrix, PSTR("Raise")); - break; - case L_LOWER: - matrix_write_P(matrix, PSTR("Lower")); - break; - case L_ADJUST: - case L_ADJUST_TRI: - matrix_write_P(matrix, PSTR("Adjust")); - break; - default: - matrix_write(matrix, buf); - } - - // Host Keyboard LED Status - char led[40]; - snprintf(led, sizeof(led), "\n%s %s %s", - (host_keyboard_leds() & (1<<USB_LED_NUM_LOCK)) ? "NUMLOCK" : " ", - (host_keyboard_leds() & (1<<USB_LED_CAPS_LOCK)) ? "CAPS" : " ", - (host_keyboard_leds() & (1<<USB_LED_SCROLL_LOCK)) ? "SCLK" : " "); - matrix_write(matrix, led); -} - - -void iota_gfx_task_user(void) { - struct CharacterMatrix matrix; - -#if DEBUG_TO_SCREEN - if (debug_enable) { - return; - } -#endif - - matrix_clear(&matrix); - if(is_master){ - render_status(&matrix); - }else{ - render_logo(&matrix); - } - matrix_update(&display, &matrix); -} - -#endif diff --git a/keyboards/helix/pico/keymaps/default/readme.md b/keyboards/helix/pico/keymaps/default/readme.md index 789097021b..a6c81651a3 100644 --- a/keyboards/helix/pico/keymaps/default/readme.md +++ b/keyboards/helix/pico/keymaps/default/readme.md @@ -96,10 +96,8 @@ see `qmk_firmware/keyboards/helix/pico/keymaps/default/rules.mk` ``` # Helix Spacific Build Options -# you can uncomment and edit follows 6 Variables -# jp: 以下の6つの変数を必要に応じて編集し、コメントアウトをはずします。 -# OLED_ENABLE = no # OLED_ENABLE -# LOCAL_GLCDFONT = no # use each keymaps "helixfont.h" insted of "common/glcdfont.c" +# you can uncomment and edit follows 4 Variables +# jp: 以下の4つの変数を必要に応じて編集し、コメントアウトをはずします。 # LED_BACK_ENABLE = no # LED backlight (Enable WS2812 RGB underlight.) # LED_UNDERGLOW_ENABLE = no # LED underglow (Enable WS2812 RGB underlight.) # LED_ANIMATIONS = yes # LED animations diff --git a/keyboards/helix/pico/keymaps/default/readme_jp.md b/keyboards/helix/pico/keymaps/default/readme_jp.md index 28594dafcb..73f97ad9a6 100644 --- a/keyboards/helix/pico/keymaps/default/readme_jp.md +++ b/keyboards/helix/pico/keymaps/default/readme_jp.md @@ -58,16 +58,13 @@ ## カスタマイズ -オプションの OLED をつけたり、 RGB バックライトまたは、RGB Underglow をつけた場合は、 `qmk_firmware/keyboards/helix/pico/keymaps/default/rules.mk` の以下の部分を編集して機能を有効化してください。 ``` # Helix Spacific Build Options -# you can uncomment and edit follows 6 Variables -# jp: 以下の6つの変数を必要に応じて編集し、コメントアウトをはずします。 -# OLED_ENABLE = no # OLED_ENABLE -# LOCAL_GLCDFONT = no # use each keymaps "helixfont.h" insted of "common/glcdfont.c" +# you can uncomment and edit follows 4 Variables +# jp: 以下の4つの変数を必要に応じて編集し、コメントアウトをはずします。 # LED_BACK_ENABLE = no # LED backlight (Enable WS2812 RGB underlight.) # LED_UNDERGLOW_ENABLE = no # LED underglow (Enable WS2812 RGB underlight.) # LED_ANIMATIONS = yes # LED animations @@ -89,13 +86,6 @@ rules.mk の下記の部分を編集して no を yes に変更してくださ LED_UNDERGLOW_ENABLE = yes # LED underglow (Enable WS2812 RGB underlight.) ``` -## OLEDを有効にする - -rules.mk の下記の部分を編集して no を yes に変更してください。 -``` -OLED_ENABLE = yes # OLED_ENABLE -``` - ## iPad/iPhoneサポートを有効にする。 rules.mk の下記の部分を編集して no を yes に変更してください。 diff --git a/keyboards/helix/pico/keymaps/default/rules.mk b/keyboards/helix/pico/keymaps/default/rules.mk index b50519fef5..9a29406c17 100644 --- a/keyboards/helix/pico/keymaps/default/rules.mk +++ b/keyboards/helix/pico/keymaps/default/rules.mk @@ -3,10 +3,8 @@ AUDIO_ENABLE = yes # Audio output LTO_ENABLE = no # if firmware size over limit, try this option # Helix Spacific Build Options -# you can uncomment and edit follows 6 Variables -# jp: 以下の6つの変数を必要に応じて編集し、コメントアウトをはずします。 -# OLED_ENABLE = no # OLED_ENABLE -# LOCAL_GLCDFONT = no # use each keymaps "helixfont.h" insted of "common/glcdfont.c" +# you can uncomment and edit follows 4 Variables +# jp: 以下の4つの変数を必要に応じて編集し、コメントアウトをはずします。 # LED_BACK_ENABLE = no # LED backlight (Enable WS2812 RGB underlight.) # LED_UNDERGLOW_ENABLE = no # LED underglow (Enable WS2812 RGB underlight.) # LED_ANIMATIONS = yes # LED animations diff --git a/keyboards/helix/pico/keymaps/mtei/keymap.c b/keyboards/helix/pico/keymaps/mtei/keymap.c index 728ef0eb5f..58684be497 100644 --- a/keyboards/helix/pico/keymaps/mtei/keymap.c +++ b/keyboards/helix/pico/keymaps/mtei/keymap.c @@ -1,31 +1,23 @@ +/* Copyright 2018 mtei + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ #include QMK_KEYBOARD_H -#include "bootloader.h" -#ifdef PROTOCOL_LUFA -#include "lufa.h" -#include "split_util.h" -#endif -#ifdef AUDIO_ENABLE - #include "audio.h" -#endif -#ifdef SSD1306OLED - #include "ssd1306.h" -#endif -#ifdef CONSOLE_ENABLE - #include <print.h> -#endif #define LAYOUT_wrapper(...) LAYOUT(__VA_ARGS__) #define kc5(a,b,c,d,e) KC_##a, KC_##b, KC_##c, KC_##d, KC_##e -extern keymap_config_t keymap_config; - -#ifdef RGBLIGHT_ENABLE -//Following line allows macro to read current RGB settings -extern rgblight_config_t rgblight_config; -#endif - -extern uint8_t is_master; - // Each layer gets a name for readability, which is then used in the keymap matrix below. // The underscores don't mean anything - you can have a layer called STUFF or any other name. // Layer names don't all need to be of the same length, obviously, and you can also skip them @@ -373,10 +365,6 @@ void matrix_init_user(void) { #ifdef AUDIO_ENABLE startup_user(); #endif - //SSD1306 OLED init, make sure to add #define SSD1306OLED in config.h - #ifdef SSD1306OLED - iota_gfx_init(!has_usb()); // turns on the display - #endif } @@ -404,124 +392,3 @@ void music_scale_user(void) } #endif - - -//SSD1306 OLED update loop, make sure to add #define SSD1306OLED in config.h -#ifdef SSD1306OLED - -void matrix_scan_user(void) { - iota_gfx_task(); // this is what updates the display continuously -} - -void matrix_update(struct CharacterMatrix *dest, - const struct CharacterMatrix *source) { - if (memcmp(dest->display, source->display, sizeof(dest->display))) { - memcpy(dest->display, source->display, sizeof(dest->display)); - dest->dirty = true; - } -} - -static void render_logo(struct CharacterMatrix *matrix) { - - static char logo[]={ - 0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8a,0x8b,0x8c,0x8d,0x8e,0x8f,0x90,0x91,0x92,0x93,0x94, - 0xa0,0xa1,0xa2,0xa3,0xa4,0xa5,0xa6,0xa7,0xa8,0xa9,0xaa,0xab,0xac,0xad,0xae,0xaf,0xb0,0xb1,0xb2,0xb3,0xb4, - 0xc0,0xc1,0xc2,0xc3,0xc4,0xc5,0xc6,0xc7,0xc8,0xc9,0xca,0xcb,0xcc,0xcd,0xce,0xcf,0xd0,0xd1,0xd2,0xd3,0xd4, - 0}; - matrix_write(matrix, logo); -#if defined(RGBLIGHT_ENABLE) && defined(RGBLIGHT_ANIMATIONS) - char buf[30]; - if(rgblight_config.enable) { - snprintf(buf, sizeof(buf), " LED %2d: %d,%d,%d ", - rgblight_config.mode, - rgblight_config.hue/RGBLIGHT_HUE_STEP, - rgblight_config.sat/RGBLIGHT_SAT_STEP, - rgblight_config.val/RGBLIGHT_VAL_STEP); - matrix_write(matrix, buf); - } -#endif - //matrix_write_P(&matrix, PSTR(" Split keyboard kit")); -} - -static const char Qwerty_name[] PROGMEM = " Qwerty"; -static const char Colemak_name[] PROGMEM = " Colemak"; -static const char Dvorak_name[] PROGMEM = " Dvorak"; -static const char Eucalyn_name[] PROGMEM = " Eucalyn"; - -static const char NumL_name[] PROGMEM = ":NumL"; -static const char NumR_name[] PROGMEM = ":NumR"; -static const char Lower_name[] PROGMEM = ":Func"; -static const char Raise_name[] PROGMEM = ":Extra"; -static const char Adjust_name[] PROGMEM = ":Adjust"; - -static const char *layer_names[] = { - [_QWERTY] = Qwerty_name, - [_COLEMAK] = Colemak_name, - [_DVORAK] = Dvorak_name, - [_EUCALYN] = Eucalyn_name, - - [_NUML] = NumL_name, - [_NUMR] = NumR_name, - [_LOWER] = Lower_name, - [_RAISE] = Raise_name, - [_ADJUST] = Adjust_name -}; - -void render_status(struct CharacterMatrix *matrix) { - - // Render to mode icon - static char logo[][2][3]={{{0x95,0x96,0},{0xb5,0xb6,0}},{{0x97,0x98,0},{0xb7,0xb8,0}}}; - if(keymap_config.swap_lalt_lgui==false){ - matrix_write(matrix, logo[0][0]); - matrix_write_P(matrix, PSTR("\n")); - matrix_write(matrix, logo[0][1]); - }else{ - matrix_write(matrix, logo[1][0]); - matrix_write_P(matrix, PSTR("\n")); - matrix_write(matrix, logo[1][1]); - } - - // Define layers here, Have not worked out how to have text displayed for each layer. Copy down the number you see and add a case for it below - int name_num; - uint32_t lstate; - matrix_write_P(matrix, layer_names[current_default_layer]); - matrix_write_P(matrix, PSTR("\n")); - for( lstate = layer_state, name_num = 0; - lstate && name_num < sizeof(layer_names)/sizeof(char *); - lstate >>=1, name_num++ ) { - if( (lstate & 1) != 0 ) { - if( layer_names[name_num] ) { - matrix_write_P(matrix, layer_names[name_num]); - } - } - } - - // Host Keyboard LED Status - char led[40]; - snprintf(led, sizeof(led), "\n%s %s %s", - (host_keyboard_leds() & (1<<USB_LED_NUM_LOCK)) ? "NUMLOCK" : " ", - (host_keyboard_leds() & (1<<USB_LED_CAPS_LOCK)) ? "CAPS" : " ", - (host_keyboard_leds() & (1<<USB_LED_SCROLL_LOCK)) ? "SCLK" : " "); - matrix_write(matrix, led); -} - - -void iota_gfx_task_user(void) { - struct CharacterMatrix matrix; - -#if DEBUG_TO_SCREEN - if (debug_enable) { - return; - } -#endif - - matrix_clear(&matrix); - if(is_master){ - render_status(&matrix); - }else{ - render_logo(&matrix); - } - matrix_update(&display, &matrix); -} - -#endif diff --git a/keyboards/helix/pico/keymaps/mtei/rules.mk b/keyboards/helix/pico/keymaps/mtei/rules.mk index 05a60f67d5..413d0519d6 100644 --- a/keyboards/helix/pico/keymaps/mtei/rules.mk +++ b/keyboards/helix/pico/keymaps/mtei/rules.mk @@ -10,10 +10,8 @@ AUDIO_ENABLE = yes # Audio output on port B5 LTO_ENABLE = no # if firmware size over limit, try this option # Helix Spacific Build Options -# you can uncomment and edit follows 6 Variables -# jp: 以下の6つの変数を必要に応じて編集し、コメントアウトをはずします。 -# OLED_ENABLE = no # OLED_ENABLE -# LOCAL_GLCDFONT = no # use each keymaps "helixfont.h" insted of "common/glcdfont.c" +# you can uncomment and edit follows 4 Variables +# jp: 以下の4つの変数を必要に応じて編集し、コメントアウトをはずします。 # LED_BACK_ENABLE = no # LED backlight (Enable WS2812 RGB underlight.) # LED_UNDERGLOW_ENABLE = no # LED underglow (Enable WS2812 RGB underlight.) # LED_ANIMATIONS = yes # LED animations diff --git a/keyboards/helix/pico/matrix.c b/keyboards/helix/pico/matrix.c deleted file mode 100644 index b18213d846..0000000000 --- a/keyboards/helix/pico/matrix.c +++ /dev/null @@ -1,342 +0,0 @@ -/* -Copyright 2012 Jun Wako <wakojun@gmail.com> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -/* - * scan matrix - */ -#include <stdint.h> -#include <stdbool.h> -#include <avr/io.h> -#include <avr/wdt.h> -#include <avr/interrupt.h> -#include <util/delay.h> -#include "print.h" -#include "debug.h" -#include "util.h" -#include "matrix.h" -#include "split_util.h" -#include "quantum.h" - -#ifdef USE_MATRIX_I2C -# include "i2c.h" -#else // USE_SERIAL -# include "serial.h" -#endif - -#ifndef DEBOUNCE -# define DEBOUNCE 5 -#endif - -#define ERROR_DISCONNECT_COUNT 5 - -static uint8_t debouncing = DEBOUNCE; -static const int ROWS_PER_HAND = MATRIX_ROWS/2; -static uint8_t error_count = 0; - -static const uint8_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS; -static const uint8_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS; - -/* matrix state(1:on, 0:off) */ -static matrix_row_t matrix[MATRIX_ROWS]; -static matrix_row_t matrix_debouncing[MATRIX_ROWS]; - -static matrix_row_t read_cols(void); -static void init_cols(void); -static void unselect_rows(void); -static void select_row(uint8_t row); -static uint8_t matrix_master_scan(void); - - -__attribute__ ((weak)) -void matrix_init_kb(void) { - matrix_init_user(); -} - -__attribute__ ((weak)) -void matrix_scan_kb(void) { - matrix_scan_user(); -} - -__attribute__ ((weak)) -void matrix_init_user(void) { -} - -__attribute__ ((weak)) -void matrix_scan_user(void) { -} - -inline -uint8_t matrix_rows(void) -{ - return MATRIX_ROWS; -} - -inline -uint8_t matrix_cols(void) -{ - return MATRIX_COLS; -} - -void matrix_init(void) -{ - split_keyboard_setup(); - - // initialize row and col - unselect_rows(); - init_cols(); - - setPinOutput(B0); - setPinOutput(D5); - writePinHigh(B0); - writePinHigh(D5); - - // initialize matrix state: all keys off - for (uint8_t i=0; i < MATRIX_ROWS; i++) { - matrix[i] = 0; - matrix_debouncing[i] = 0; - } - - matrix_init_quantum(); -} - -uint8_t _matrix_scan(void) -{ - // Right hand is stored after the left in the matirx so, we need to offset it - int offset = isLeftHand ? 0 : (ROWS_PER_HAND); - - for (uint8_t i = 0; i < ROWS_PER_HAND; i++) { - select_row(i); - _delay_us(30); // without this wait read unstable value. - matrix_row_t cols = read_cols(); - if (matrix_debouncing[i+offset] != cols) { - matrix_debouncing[i+offset] = cols; - debouncing = DEBOUNCE; - } - unselect_rows(); - } - - if (debouncing) { - if (--debouncing) { - _delay_ms(1); - } else { - for (uint8_t i = 0; i < ROWS_PER_HAND; i++) { - matrix[i+offset] = matrix_debouncing[i+offset]; - } - } - } - - return 1; -} - -#ifdef USE_MATRIX_I2C - -// Get rows from other half over i2c -int i2c_transaction(void) { - int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0; - - int err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_WRITE); - if (err) goto i2c_error; - - // start of matrix stored at 0x00 - err = i2c_master_write(0x00); - if (err) goto i2c_error; - - // Start read - err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_READ); - if (err) goto i2c_error; - - if (!err) { - int i; - for (i = 0; i < ROWS_PER_HAND-1; ++i) { - matrix[slaveOffset+i] = i2c_master_read(I2C_ACK); - } - matrix[slaveOffset+i] = i2c_master_read(I2C_NACK); - i2c_master_stop(); - } else { -i2c_error: // the cable is disconnceted, or something else went wrong - i2c_reset_state(); - return err; - } - - return 0; -} - -#else // USE_SERIAL - -int serial_transaction(void) { - int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0; - int ret=serial_update_buffers(); - if (ret ) { - if(ret==2) writePinLow(B0); - return 1; - } - writePinHigh(B0); - for (int i = 0; i < ROWS_PER_HAND; ++i) { - matrix[slaveOffset+i] = serial_slave_buffer[i]; - } - return 0; -} -#endif - -uint8_t matrix_scan(void) -{ - if (is_helix_master()) { - matrix_master_scan(); - }else{ - matrix_slave_scan(); - - int offset = (isLeftHand) ? ROWS_PER_HAND : 0; - - for (int i = 0; i < ROWS_PER_HAND; ++i) { - matrix[offset+i] = serial_master_buffer[i]; - } - - matrix_scan_quantum(); - } - return 1; -} - - -uint8_t matrix_master_scan(void) { - - int ret = _matrix_scan(); - -#ifndef KEYBOARD_helix_rev1 - int offset = (isLeftHand) ? 0 : ROWS_PER_HAND; - -#ifdef USE_MATRIX_I2C -// for (int i = 0; i < ROWS_PER_HAND; ++i) { - /* i2c_slave_buffer[i] = matrix[offset+i]; */ -// i2c_slave_buffer[i] = matrix[offset+i]; -// } -#else // USE_SERIAL - for (int i = 0; i < ROWS_PER_HAND; ++i) { - serial_master_buffer[i] = matrix[offset+i]; - } -#endif -#endif - -#ifdef USE_MATRIX_I2C - if( i2c_transaction() ) { -#else // USE_SERIAL - if( serial_transaction() ) { -#endif - // turn on the indicator led when halves are disconnected - writePinLow(D5); - - error_count++; - - if (error_count > ERROR_DISCONNECT_COUNT) { - // reset other half if disconnected - int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0; - for (int i = 0; i < ROWS_PER_HAND; ++i) { - matrix[slaveOffset+i] = 0; - } - } - } else { - // turn off the indicator led on no error - writePinHigh(D5); - error_count = 0; - } - matrix_scan_quantum(); - return ret; -} - -void matrix_slave_scan(void) { - _matrix_scan(); - - int offset = (isLeftHand) ? 0 : ROWS_PER_HAND; - -#ifdef USE_MATRIX_I2C - for (int i = 0; i < ROWS_PER_HAND; ++i) { - /* i2c_slave_buffer[i] = matrix[offset+i]; */ - i2c_slave_buffer[i] = matrix[offset+i]; - } -#else // USE_SERIAL - for (int i = 0; i < ROWS_PER_HAND; ++i) { - serial_slave_buffer[i] = matrix[offset+i]; - } -#endif -} - -bool matrix_is_modified(void) -{ - if (debouncing) return false; - return true; -} - -inline -bool matrix_is_on(uint8_t row, uint8_t col) -{ - return (matrix[row] & ((matrix_row_t)1<<col)); -} - -inline -matrix_row_t matrix_get_row(uint8_t row) -{ - return matrix[row]; -} - -void matrix_print(void) -{ - print("\nr/c 0123456789ABCDEF\n"); - for (uint8_t row = 0; row < MATRIX_ROWS; row++) { - print_hex8(row); print(": "); - print_bin_reverse16(matrix_get_row(row)); - print("\n"); - } -} - -uint8_t matrix_key_count(void) -{ - uint8_t count = 0; - for (uint8_t i = 0; i < MATRIX_ROWS; i++) { - count += bitpop16(matrix[i]); - } - return count; -} - -static void init_cols(void) -{ - for(int x = 0; x < MATRIX_COLS; x++) { - _SFR_IO8((col_pins[x] >> 4) + 1) &= ~_BV(col_pins[x] & 0xF); - _SFR_IO8((col_pins[x] >> 4) + 2) |= _BV(col_pins[x] & 0xF); - } -} - -static matrix_row_t read_cols(void) -{ - matrix_row_t result = 0; - for(int x = 0; x < MATRIX_COLS; x++) { - result |= (_SFR_IO8(col_pins[x] >> 4) & _BV(col_pins[x] & 0xF)) ? 0 : (1 << x); - } - return result; -} - -static void unselect_rows(void) -{ - for(int x = 0; x < ROWS_PER_HAND; x++) { - _SFR_IO8((row_pins[x] >> 4) + 1) &= ~_BV(row_pins[x] & 0xF); - _SFR_IO8((row_pins[x] >> 4) + 2) |= _BV(row_pins[x] & 0xF); - } -} - -static void select_row(uint8_t row) -{ - _SFR_IO8((row_pins[row] >> 4) + 1) |= _BV(row_pins[row] & 0xF); - _SFR_IO8((row_pins[row] >> 4) + 2) &= ~_BV(row_pins[row] & 0xF); -} diff --git a/keyboards/helix/pico/override_helix_options.mk-maintenance b/keyboards/helix/pico/override_helix_options.mk-maintenance new file mode 100644 index 0000000000..0ff930957e --- /dev/null +++ b/keyboards/helix/pico/override_helix_options.mk-maintenance @@ -0,0 +1,42 @@ +# +# This file is not normally used. It is used for maintenance testing purposes. +# To use it, do the following: +# +# $ cp override_helix_options.mk-maintenance override_helix_options.mk +# +$(info -------------------------) +$(info override_helix_options.mk) +$(info -------------------------) + +define HELIX_OVERRIDE_PARSE + ifeq ($(strip $1),back) + LED_BACK_ENABLE = yes + LED_UNDERGLOW_ENABLE = no + endif + ifeq ($(strip $1),under) + LED_BACK_ENABLE = no + LED_UNDERGLOW_ENABLE = yes + endif + ifneq ($(filter noled led-off led_off,$(strip $1)),) + LED_BACK_ENABLE = no + LED_UNDERGLOW_ENABLE = no + endif + ifneq ($(filter noaudio audio-off audio_off,$(strip $1)),) + AUDIO_ENABLE = no + endif + ifneq ($(filter audio audio-on audio_on,$(strip $1)),) + AUDIO_ENABLE = yes + endif + ifneq ($(filter sc split-common split_common,$(strip $1)),) + SPLIT_KEYBOARD = yes + endif + ifneq ($(filter nosc no-sc no-split-common no-split_common,$(strip $1)),) + SPLIT_KEYBOARD = no + |