summaryrefslogtreecommitdiffstats
path: root/keyboards/handwired
diff options
context:
space:
mode:
Diffstat (limited to 'keyboards/handwired')
-rw-r--r--keyboards/handwired/10k/readme.md2
-rw-r--r--keyboards/handwired/3dfoxc/readme.md2
-rw-r--r--keyboards/handwired/3dortho14u/readme.md2
-rw-r--r--keyboards/handwired/3dortho14u/rev1/readme.md2
-rw-r--r--keyboards/handwired/3dortho14u/rev2/readme.md2
-rw-r--r--keyboards/handwired/axon/readme.md4
-rw-r--r--keyboards/handwired/baredev/rev1/readme.md2
-rw-r--r--keyboards/handwired/battleship_gamepad/readme.md2
-rw-r--r--keyboards/handwired/croxsplit44/readme.md2
-rw-r--r--keyboards/handwired/dactyl_manuform/6x6/readme.md2
-rw-r--r--keyboards/handwired/elrgo_s/readme.md2
-rw-r--r--keyboards/handwired/hillside/46/readme.md2
-rw-r--r--keyboards/handwired/hillside/48/readme.md2
-rw-r--r--keyboards/handwired/hillside/52/readme.md2
-rw-r--r--keyboards/handwired/lagrange/readme.md2
-rw-r--r--keyboards/handwired/lemonpad/readme.md2
-rw-r--r--keyboards/handwired/m40/5x5_macropad/readme.md2
-rw-r--r--keyboards/handwired/macroboard/readme.md2
-rw-r--r--keyboards/handwired/meck_tkl/readme.md2
-rw-r--r--keyboards/handwired/snatchpad/readme.md2
-rw-r--r--keyboards/handwired/swiftrax/bumblebee/readme.md2
-rw-r--r--keyboards/handwired/swiftrax/digicarp65/readme.md4
-rw-r--r--keyboards/handwired/swiftrax/digicarpice/readme.md2
-rw-r--r--keyboards/handwired/swiftrax/glacier/readme.md2
-rw-r--r--keyboards/handwired/tractyl_manuform/5x6_right/f411/readme.md2
-rw-r--r--keyboards/handwired/tractyl_manuform/readme.md2
-rw-r--r--keyboards/handwired/wakizashi40/readme.md2
27 files changed, 29 insertions, 29 deletions
diff --git a/keyboards/handwired/10k/readme.md b/keyboards/handwired/10k/readme.md
index 270297e927..e681a274d3 100644
--- a/keyboards/handwired/10k/readme.md
+++ b/keyboards/handwired/10k/readme.md
@@ -21,4 +21,4 @@ Enter the bootloader in 3 ways:
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
-* **Keycode in layout**: Press the key mapped to `RESET` if it is available
+* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
diff --git a/keyboards/handwired/3dfoxc/readme.md b/keyboards/handwired/3dfoxc/readme.md
index 3d6e33a5c1..9f4dff57d6 100644
--- a/keyboards/handwired/3dfoxc/readme.md
+++ b/keyboards/handwired/3dfoxc/readme.md
@@ -37,6 +37,6 @@ Enter the bootloader in 3 ways:
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
-* **Keycode in layout**: Press the key mapped to `RESET` if it is available
+* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
diff --git a/keyboards/handwired/3dortho14u/readme.md b/keyboards/handwired/3dortho14u/readme.md
index 3163891d48..926721fc72 100644
--- a/keyboards/handwired/3dortho14u/readme.md
+++ b/keyboards/handwired/3dortho14u/readme.md
@@ -37,4 +37,4 @@ Enter the bootloader in 3 ways:
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
-* **Keycode in layout**: Press the key mapped to `RESET` if it is available
+* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
diff --git a/keyboards/handwired/3dortho14u/rev1/readme.md b/keyboards/handwired/3dortho14u/rev1/readme.md
index e785369b23..7a30179797 100644
--- a/keyboards/handwired/3dortho14u/rev1/readme.md
+++ b/keyboards/handwired/3dortho14u/rev1/readme.md
@@ -36,4 +36,4 @@ Enter the bootloader in 3 ways:
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
-* **Keycode in layout**: Press the key mapped to `RESET` if it is available
+* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
diff --git a/keyboards/handwired/3dortho14u/rev2/readme.md b/keyboards/handwired/3dortho14u/rev2/readme.md
index bb2e982130..0b2f1c09df 100644
--- a/keyboards/handwired/3dortho14u/rev2/readme.md
+++ b/keyboards/handwired/3dortho14u/rev2/readme.md
@@ -36,4 +36,4 @@ Enter the bootloader in 3 ways:
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
-* **Keycode in layout**: Press the key mapped to `RESET` if it is available
+* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
diff --git a/keyboards/handwired/axon/readme.md b/keyboards/handwired/axon/readme.md
index ca422130ef..d48297b4f7 100644
--- a/keyboards/handwired/axon/readme.md
+++ b/keyboards/handwired/axon/readme.md
@@ -15,8 +15,8 @@ Make example for this keyboard (after setting up your build environment):
## To reset into bootloader mode:
1. While plugged in, press and hold `BOOT` switch
-2. While holding `BOOT`, press `RESET` and hold it for a second or two
-3. Release `RESET`
+2. While holding `BOOT`, press `QK_BOOT` and hold it for a second or two
+3. Release `QK_BOOT`
4. Release `BOOT`
5. The keyboard should now be recognized as a USBasp programmer device.
diff --git a/keyboards/handwired/baredev/rev1/readme.md b/keyboards/handwired/baredev/rev1/readme.md
index 3f852f2bc6..1dac2fb6ad 100644
--- a/keyboards/handwired/baredev/rev1/readme.md
+++ b/keyboards/handwired/baredev/rev1/readme.md
@@ -26,4 +26,4 @@ Enter the bootloader in 3 ways:
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
-* **Keycode in layout**: Press the key mapped to `RESET` if it is available \ No newline at end of file
+* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available \ No newline at end of file
diff --git a/keyboards/handwired/battleship_gamepad/readme.md b/keyboards/handwired/battleship_gamepad/readme.md
index c566753161..58eb72bd28 100644
--- a/keyboards/handwired/battleship_gamepad/readme.md
+++ b/keyboards/handwired/battleship_gamepad/readme.md
@@ -24,6 +24,6 @@ Enter the bootloader in 3 ways:
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (the top left key in the 2x5 bank) and plug in the keyboard.
* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead.
-* **Keycode in layout**: Press the key mapped to `RESET`. In the default layout this is the key at (0,0) on layer 1.
+* **Keycode in layout**: Press the key mapped to `QK_BOOT`. In the default layout this is the key at (0,0) on layer 1.
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
diff --git a/keyboards/handwired/croxsplit44/readme.md b/keyboards/handwired/croxsplit44/readme.md
index b9eeb305b2..64a5e2593e 100644
--- a/keyboards/handwired/croxsplit44/readme.md
+++ b/keyboards/handwired/croxsplit44/readme.md
@@ -20,4 +20,4 @@ Enter the bootloader in 3 ways:
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
-* **Keycode in layout**: Press the key mapped to `RESET` if it is available
+* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
diff --git a/keyboards/handwired/dactyl_manuform/6x6/readme.md b/keyboards/handwired/dactyl_manuform/6x6/readme.md
index 9b079be466..c7500448da 100644
--- a/keyboards/handwired/dactyl_manuform/6x6/readme.md
+++ b/keyboards/handwired/dactyl_manuform/6x6/readme.md
@@ -60,4 +60,4 @@ Enter the bootloader in 3 ways:
* **Bootmagic reset**: Hold down the key at F1 for left side, and F7 for right side.
* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
-* **Keycode in layout**: Press the key mapped to `RESET`, in dumam keymap it's assigned to F1 and F12 keys on mod layers.
+* **Keycode in layout**: Press the key mapped to `QK_BOOT`, in dumam keymap it's assigned to F1 and F12 keys on mod layers.
diff --git a/keyboards/handwired/elrgo_s/readme.md b/keyboards/handwired/elrgo_s/readme.md
index 5fb5ab6acb..d741f423d9 100644
--- a/keyboards/handwired/elrgo_s/readme.md
+++ b/keyboards/handwired/elrgo_s/readme.md
@@ -25,4 +25,4 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to
Enter the bootloader in 2 ways:
* **Physical reset button**: Briefly press the button through the hole on the left side of the case.
-* **Keycode in layout**: Press the key mapped to `RESET` if it is available
+* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
diff --git a/keyboards/handwired/hillside/46/readme.md b/keyboards/handwired/hillside/46/readme.md
index 8765c8029e..f1c9483cab 100644
--- a/keyboards/handwired/hillside/46/readme.md
+++ b/keyboards/handwired/hillside/46/readme.md
@@ -24,6 +24,6 @@ Flashing example for this keyboard:
Enter the bootloader by either:
* **Physical reset button**: Briefly press the button on the front of the PCB.
-* **Keycode in layout**: Press the key mapped to `RESET` if it is available
+* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
diff --git a/keyboards/handwired/hillside/48/readme.md b/keyboards/handwired/hillside/48/readme.md
index ec6dffc0f2..e65deed9c8 100644
--- a/keyboards/handwired/hillside/48/readme.md
+++ b/keyboards/handwired/hillside/48/readme.md
@@ -24,6 +24,6 @@ Flashing example for this keyboard:
Enter the bootloader by either:
* **Physical reset button**: Briefly press the button on the front of the PCB.
-* **Keycode in layout**: Press the key mapped to `RESET` if it is available
+* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
diff --git a/keyboards/handwired/hillside/52/readme.md b/keyboards/handwired/hillside/52/readme.md
index 62ca08ad67..3878bc062a 100644
--- a/keyboards/handwired/hillside/52/readme.md
+++ b/keyboards/handwired/hillside/52/readme.md
@@ -24,6 +24,6 @@ Flashing example for this keyboard:
Enter the bootloader by either:
* **Physical reset button**: Briefly press the button on the front of the PCB.
-* **Keycode in layout**: Press the key mapped to `RESET` if it is available
+* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
diff --git a/keyboards/handwired/lagrange/readme.md b/keyboards/handwired/lagrange/readme.md
index 5d7f5bb08e..a4157771a4 100644
--- a/keyboards/handwired/lagrange/readme.md
+++ b/keyboards/handwired/lagrange/readme.md
@@ -16,6 +16,6 @@ Flashing example for this keyboard:
make handwired/lagrange:default:flash
-To program the keyboard you'll need to reset it. This can be accomplished, either through the reset button, accessible via a hole in the bottom cover, or, if you've assigned the `RESET` keycode to a key, by pressing that key.
+To program the keyboard you'll need to reset it. This can be accomplished, either through the reset button, accessible via a hole in the bottom cover, or, if you've assigned the `QK_BOOT` keycode to a key, by pressing that key.
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
diff --git a/keyboards/handwired/lemonpad/readme.md b/keyboards/handwired/lemonpad/readme.md
index 4c1c2082e9..788bca6b43 100644
--- a/keyboards/handwired/lemonpad/readme.md
+++ b/keyboards/handwired/lemonpad/readme.md
@@ -24,4 +24,4 @@ Enter the bootloader in 3 ways:
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
-* **Keycode in layout**: Press the key mapped to `RESET` if it is available
+* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
diff --git a/keyboards/handwired/m40/5x5_macropad/readme.md b/keyboards/handwired/m40/5x5_macropad/readme.md
index 7ce38d6593..457b8cf4ee 100644
--- a/keyboards/handwired/m40/5x5_macropad/readme.md
+++ b/keyboards/handwired/m40/5x5_macropad/readme.md
@@ -23,4 +23,4 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to
Enter the bootloader in 2 ways:
* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
-* **Keycode in layout**: Press the key mapped to `RESET` if it is available. In default layout (if you flashed it already once) it is the top-right button.
+* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available. In default layout (if you flashed it already once) it is the top-right button.
diff --git a/keyboards/handwired/macroboard/readme.md b/keyboards/handwired/macroboard/readme.md
index ee2351f99f..ea32085bc0 100644
--- a/keyboards/handwired/macroboard/readme.md
+++ b/keyboards/handwired/macroboard/readme.md
@@ -24,4 +24,4 @@ Enter the bootloader in 3 ways:
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
-* **Keycode in layout**: Press the key mapped to `RESET` if it is available, by default 5th column, 5th row
+* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available, by default 5th column, 5th row
diff --git a/keyboards/handwired/meck_tkl/readme.md b/keyboards/handwired/meck_tkl/readme.md
index ec09047dde..9db9cd222f 100644
--- a/keyboards/handwired/meck_tkl/readme.md
+++ b/keyboards/handwired/meck_tkl/readme.md
@@ -24,7 +24,7 @@ Enter the bootloader in 3 ways:
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
-* **Keycode in layout**: Press the key mapped to `RESET` if it is available
+* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
## Wiring instructions
diff --git a/keyboards/handwired/snatchpad/readme.md b/keyboards/handwired/snatchpad/readme.md
index 98021cc6bd..9e502579b5 100644
--- a/keyboards/handwired/snatchpad/readme.md
+++ b/keyboards/handwired/snatchpad/readme.md
@@ -31,4 +31,4 @@ Enter the bootloader in 3 ways:
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
-* **Keycode in layout**: Press the key mapped to `RESET` if it is available
+* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
diff --git a/keyboards/handwired/swiftrax/bumblebee/readme.md b/keyboards/handwired/swiftrax/bumblebee/readme.md
index 32091cb83b..343fb81bf8 100644
--- a/keyboards/handwired/swiftrax/bumblebee/readme.md
+++ b/keyboards/handwired/swiftrax/bumblebee/readme.md
@@ -12,7 +12,7 @@ Enter the bootloader in 3 ways:
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
-* **Keycode in layout**: Press the key mapped to `RESET` if it is available
+* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
Make example for this keyboard (after setting up your build environment):
diff --git a/keyboards/handwired/swiftrax/digicarp65/readme.md b/keyboards/handwired/swiftrax/digicarp65/readme.md
index 619ec519f0..34e0c0b755 100644
--- a/keyboards/handwired/swiftrax/digicarp65/readme.md
+++ b/keyboards/handwired/swiftrax/digicarp65/readme.md
@@ -17,5 +17,5 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to
Enter the bootloader in 3 ways:
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (top left key)and plug in the keyboard
-* **Physical reset button**: Briefly short the pad on the back of the PCB labeled RESET
-* **Keycode in layout**: Press the key mapped to `RESET` if it is available
+* **Physical reset button**: Briefly short the pad on the back of the PCB labeled QK_BOOT
+* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
diff --git a/keyboards/handwired/swiftrax/digicarpice/readme.md b/keyboards/handwired/swiftrax/digicarpice/readme.md
index 228db23a7f..d9deec7dc7 100644
--- a/keyboards/handwired/swiftrax/digicarpice/readme.md
+++ b/keyboards/handwired/swiftrax/digicarpice/readme.md
@@ -12,7 +12,7 @@ Enter the bootloader in 3 ways:
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (top left key) and plug in the keyboard
* **Physical reset button**: short the pads on the back of the pcb
-* **Keycode in layout**: Press the key mapped to `RESET` if it is available
+* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
Make example for this keyboard (after setting up your build environment):
diff --git a/keyboards/handwired/swiftrax/glacier/readme.md b/keyboards/handwired/swiftrax/glacier/readme.md
index 36588e000e..e09c179ae9 100644
--- a/keyboards/handwired/swiftrax/glacier/readme.md
+++ b/keyboards/handwired/swiftrax/glacier/readme.md
@@ -9,7 +9,7 @@
## Bootloader Enter the bootloader in 3 ways:
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
- * **Keycode in layout**: Press the key mapped to `RESET` if it is available
+ * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
Make example for flashing this keyboard (after setting up your build environment):
diff --git a/keyboards/handwired/tractyl_manuform/5x6_right/f411/readme.md b/keyboards/handwired/tractyl_manuform/5x6_right/f411/readme.md
index f732295ba3..6b98bdc9b9 100644
--- a/keyboards/handwired/tractyl_manuform/5x6_right/f411/readme.md
+++ b/keyboards/handwired/tractyl_manuform/5x6_right/f411/readme.md
@@ -35,4 +35,4 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to
* **Bootmagic reset**: Hold down the top right key on the right side, or the top left key on the left side while plugging in.
* **Physical reset button**: Briefly press the "USER" button on the BlackPill
-* **Keycode in layout**: Press the key mapped to `RESET`.
+* **Keycode in layout**: Press the key mapped to `QK_BOOT`.
diff --git a/keyboards/handwired/tractyl_manuform/readme.md b/keyboards/handwired/tractyl_manuform/readme.md
index e78fd2ee06..576a7cc74e 100644
--- a/keyboards/handwired/tractyl_manuform/readme.md
+++ b/keyboards/handwired/tractyl_manuform/readme.md
@@ -22,4 +22,4 @@ Enter the bootloader in 3 ways:
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
-* **Keycode in layout**: Press the key mapped to `RESET` if it is available
+* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
diff --git a/keyboards/handwired/wakizashi40/readme.md b/keyboards/handwired/wakizashi40/readme.md
index 8bb6c2aebc..b419f5032b 100644
--- a/keyboards/handwired/wakizashi40/readme.md
+++ b/keyboards/handwired/wakizashi40/readme.md
@@ -18,4 +18,4 @@ See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools)
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
-* **Keycode in layout**: Press the key mapped to `RESET` if it is available
+* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available