diff options
Diffstat (limited to 'keyboards/handwired')
87 files changed, 91 insertions, 414 deletions
diff --git a/keyboards/handwired/108key_trackpoint/config.h b/keyboards/handwired/108key_trackpoint/config.h index 703cd93e64..fccdf6424c 100644 --- a/keyboards/handwired/108key_trackpoint/config.h +++ b/keyboards/handwired/108key_trackpoint/config.h @@ -5,7 +5,7 @@ #define MATRIX_ROWS 8 #define MATRIX_COLS 23 -#ifdef PS2_USE_USART +#ifdef PS2_DRIVER_USART #define PS2_CLOCK_PIN D5 #define PS2_DATA_PIN D2 diff --git a/keyboards/handwired/108key_trackpoint/rules.mk b/keyboards/handwired/108key_trackpoint/rules.mk index ab84b088bc..24f1d9b652 100644 --- a/keyboards/handwired/108key_trackpoint/rules.mk +++ b/keyboards/handwired/108key_trackpoint/rules.mk @@ -17,4 +17,5 @@ BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output PS2_MOUSE_ENABLE = yes -PS2_USE_USART = yes +PS2_ENABLE = yes +PS2_DRIVER = usart diff --git a/keyboards/handwired/3dortho14u/rev1/info.json b/keyboards/handwired/3dortho14u/rev1/info.json index bd9220281c..2c8e229c02 100644 --- a/keyboards/handwired/3dortho14u/rev1/info.json +++ b/keyboards/handwired/3dortho14u/rev1/info.json @@ -4,6 +4,7 @@ "url": "", "maintainer": "xia0", "processor": "atmega32u4", + "bootloader": "atmel-dfu", "debounce": 5, "diode_direction": "COL2ROW", "features": { diff --git a/keyboards/handwired/3dortho14u/rev2/info.json b/keyboards/handwired/3dortho14u/rev2/info.json index 7f241f35ff..28986f295e 100644 --- a/keyboards/handwired/3dortho14u/rev2/info.json +++ b/keyboards/handwired/3dortho14u/rev2/info.json @@ -4,6 +4,7 @@ "url": "", "maintainer": "xia0", "processor": "atmega32u4", + "bootloader": "atmel-dfu", "debounce": 5, "diode_direction": "COL2ROW", "features": { diff --git a/keyboards/handwired/6macro/config.h b/keyboards/handwired/6macro/config.h index 1e8c296855..a117fc65aa 100644 --- a/keyboards/handwired/6macro/config.h +++ b/keyboards/handwired/6macro/config.h @@ -32,7 +32,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGB_DI_PIN D2 #define RGBLED_NUM 10 -#define DRIVER_LED_TOTAL RGBLED_NUM +#define RGB_MATRIX_LED_COUNT RGBLED_NUM #define RGBLIGHT_HUE_STEP 10 #define RGBLIGHT_SAT_STEP 17 #define RGBLIGHT_VAL_STEP 17 diff --git a/keyboards/handwired/arrow_pad/keymaps/pad_21/config.h b/keyboards/handwired/arrow_pad/keymaps/pad_21/config.h index 1f07965555..0bff14a28d 100644 --- a/keyboards/handwired/arrow_pad/keymaps/pad_21/config.h +++ b/keyboards/handwired/arrow_pad/keymaps/pad_21/config.h @@ -15,137 +15,25 @@ You should have received a copy of the GNU General Public License along with this program. If not, see <http://www.gnu.org/licenses/>. */ -#ifndef CONFIG_H -#define CONFIG_H +#pragma once -#include "config_common.h" - -/* USB Device descriptor parameter */ +#undef VENDOR_ID +#undef PRODUCT_ID +#undef DEVICE_VER +#undef MANUFACTURER +#undef PRODUCT #define VENDOR_ID 0xFEED #define PRODUCT_ID 0x4097 #define DEVICE_VER 0x0001 -#define MANUFACTURER Nobody -#define PRODUCT Arrow Pad 21 +#define MANUFACTURER "Nobody" +#define PRODUCT "Arrow Pad 21" -/* key matrix size */ +#undef MATRIX_ROWS +#undef MATRIX_COLS #define MATRIX_ROWS 2 #define MATRIX_COLS 11 -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * -*/ +#undef MATRIX_ROW_PINS +#undef MATRIX_COL_PINS #define MATRIX_ROW_PINS { D3, D5 } #define MATRIX_COL_PINS { F0, F1, F4, F5, F6, F7, B6, B5, B4, D7, D4 } - -/* COL2ROW or ROW2COL */ -#define DIODE_DIRECTION ROW2COL - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ -#define BACKLIGHT_LEVELS 3 - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -//#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -//#define LOCKING_RESYNC_ENABLE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -#define FORCE_NKRO - -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -//#define NO_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION - -#endif diff --git a/keyboards/handwired/arrow_pad/keymaps/pad_21/rules.mk b/keyboards/handwired/arrow_pad/keymaps/pad_21/rules.mk index 6fae940a50..d3e5864916 100644 --- a/keyboards/handwired/arrow_pad/keymaps/pad_21/rules.mk +++ b/keyboards/handwired/arrow_pad/keymaps/pad_21/rules.mk @@ -10,5 +10,3 @@ AUDIO_ENABLE = no # Audio output on port C6 UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. - -CONFIG_H = keymaps/$(KEYMAP)/config.h
\ No newline at end of file diff --git a/ |