diff options
Diffstat (limited to 'keyboards/handwired')
36 files changed, 371 insertions, 371 deletions
diff --git a/keyboards/handwired/ergocheap/config.h b/keyboards/handwired/ergocheap/config.h index 26905e8cb3..00b9616e3e 100644 --- a/keyboards/handwired/ergocheap/config.h +++ b/keyboards/handwired/ergocheap/config.h @@ -47,6 +47,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* Set 0 if debouncing isn't needed */ #define DEBOUNCE 5 #define TAPPING_TERM 500 +#define PERMISSIVE_HOLD /* * Feature disable options diff --git a/keyboards/handwired/frenchdev/keymaps/default/keymap.c b/keyboards/handwired/frenchdev/keymaps/default/keymap.c index 2d917b412e..11463a0162 100644 --- a/keyboards/handwired/frenchdev/keymaps/default/keymap.c +++ b/keyboards/handwired/frenchdev/keymaps/default/keymap.c @@ -209,7 +209,7 @@ void press_underscore(void) { uint8_t old_layer=_BASE; void matrix_scan_user(void) { - uint8_t layer = biton32(layer_state); + uint8_t layer = get_highest_layer(layer_state); frenchdev_led_1_off(); frenchdev_led_2_off(); diff --git a/keyboards/handwired/hillside/0_1/0_1.c b/keyboards/handwired/hillside/0_1/0_1.c deleted file mode 100644 index ee096f18a7..0000000000 --- a/keyboards/handwired/hillside/0_1/0_1.c +++ /dev/null @@ -1,4 +0,0 @@ -// Copyright 2021 Michael McCoyd (@mmccoyd) -// SPDX-License-Identifier: GPL-2.0-or-later - -#include "0_1.h" diff --git a/keyboards/handwired/hillside/0_1/keymaps/default/keymap.json b/keyboards/handwired/hillside/0_1/keymaps/default/keymap.json deleted file mode 100644 index 5c672f8b8b..0000000000 --- a/keyboards/handwired/hillside/0_1/keymaps/default/keymap.json +++ /dev/null @@ -1,101 +0,0 @@ -{ "version": 1, - "notes": "", - "documentation": "\"This file is a QMK Configurator export. You can import this at <https://config.qmk.fm>. It can also be used directly with QMK's source code.\n\nTo setup your QMK environment check out the tutorial: <https://docs.qmk.fm/#/newbs>\n\nYou can convert this file to a keymap.c using this command: `qmk json2c {keymap}`\n\nYou can compile this keymap using this command: `qmk compile {keymap}`\"\n", - "keyboard": "handwired/hillside/0_1", - "keymap": "default", - "layout": "LAYOUT", - "layers": [ - ["KC_TAB" , "KC_Q" , "KC_W" , "KC_E" , "KC_R" , "KC_T", - "KC_Y" , "KC_U" , "KC_I" , "KC_O" , "KC_P" , "KC_BSPC", - - "KC_CAPS", "KC_A" , "KC_S" , "KC_D" , "KC_F" , "KC_G", - "KC_H" , "KC_J" , "KC_K" , "KC_L" , "KC_SCLN" , "KC_ENT", - - "KC_LSFT", "KC_Z" , "KC_X" , "KC_C" , "KC_V" , "KC_B" , "KC_GRV", - "KC_ESC" , "KC_N" , "KC_M" , "KC_COMM" , "KC_DOT" , "KC_SLSH" , "KC_RSFT", - - "KC_LCTL", "KC_LGUI" , "KC_LALT" , "MO(5)" , "MO(3)", - "MO(4)" , "KC_SPC" , "KC_LALT" , "KC_RGUI" , "KC_QUOT" - - ], - ["KC_TAB" , "KC_QUOT" , "KC_COMM" , "KC_DOT" , "KC_P" , "KC_Y", - "KC_F" , "KC_G" , "KC_C" , "KC_R" , "KC_L" , "KC_BSPC", - - "KC_CAPS", "KC_A" , "KC_O" , "KC_E" , "KC_U" , "KC_I", - "KC_D" , "KC_H" , "KC_T" , "KC_N" , "KC_S" , "KC_ENT", - - "KC_LSFT", "KC_SCLN" , "KC_Q" , "KC_J" , "KC_K" , "KC_X" , "KC_GRV", - "KC_ESC" , "KC_B" , "KC_M" , "KC_W" , "KC_V" , "KC_Z" , "KC_RSFT", - - "KC_LCTL", "KC_LGUI" , "KC_LALT" , "MO(5)" , "MO(3)", - "MO(4)" , "KC_SPC" , "KC_LALT" , "KC_RGUI" , "KC_SLSH" - - ], - ["KC_TAB" , "KC_Q" , "KC_W" , "KC_F" , "KC_P" , "KC_B", - "KC_J" , "KC_L" , "KC_U" , "KC_Y" , "KC_SCLN" , "KC_BSPC", - - "KC_CAPS", "KC_A" , "KC_R" , "KC_S" , "KC_T" , "KC_G", - "KC_M" , "KC_N" , "KC_E" , "KC_I" , "KC_O" , "KC_ENT", - - "KC_LSFT", "KC_Z" , "KC_X" , "KC_C" , "KC_D" , "KC_V" , "KC_GRV", - "KC_ESC" , "KC_K" , "KC_H" , "KC_COMM" , "KC_DOT" , "KC_SLSH" , "KC_RSFT", - - "KC_LCTL", "KC_LGUI" , "KC_LALT" , "MO(5)" , "MO(3)", - "MO(4)" , "KC_SPC" , "KC_LALT" , "KC_RGUI" , "KC_QUOT" - - ], - ["KC_NO" , "KC_INS" , "KC_NO" , "KC_NO" , "KC_NO" , "KC_VOLU", - "KC_PGUP", "KC_HOME" , "KC_NO" , "KC_END" , "KC_NO" , "KC_DEL", - - "KC_NO" , "KC_LGUI" , "KC_LALT" , "KC_LCTL" , "KC_LSFT" , "KC_VOLD", - "KC_PGDN", "KC_LEFT" , "KC_UP" , "KC_RGHT" , "KC_NO" , "KC_TRNS", - - "KC_LSFT", "LCTL(KC_Z)" , "LCTL(KC_X)" , "LCTL(KC_C)", "LCTL(KC_V)" , "LCTL(KC_Y)", "KC_MUTE", - "KC_ESC" , "OSM(MOD_RALT)", "LCTL(KC_LEFT)", "KC_DOWN" , "LCTL(KC_RGHT)", "KC_APP" , "KC_TRNS", - - "KC_TRNS", "KC_TRNS" , "KC_TRNS" , "KC_TRNS" , "KC_TRNS", - "MO(6)" , "KC_BSPC" , "KC_TRNS" , "KC_TRNS" , "KC_RCTL" - - ], - ["KC_F11" , "KC_EXLM" , "KC_AT" , "KC_HASH" , "KC_DLR" , "KC_PERC", - "KC_CIRC", "KC_AMPR" , "KC_ASTR" , "KC_LPRN" , "KC_RPRN" , "KC_TRNS", - - "KC_F12" , "KC_F1" , "KC_F2" , "KC_F3" , "KC_F4" , "KC_F5", - "KC_PIPE", "KC_LSFT" , "KC_LCTL" , "KC_LALT" , "KC_LGUI" , "KC_TRNS", - - "KC_LSFT", "KC_F6" , "KC_F7" , "KC_F8" , "KC_F9" , "KC_F10" , "KC_PSCR", - "KC_ESC" , "KC_BSLS" , "KC_LBRC" , "KC_RBRC" , "KC_LCBR" , "KC_RCBR" , "KC_TRNS", - - "KC_TRNS", "KC_TRNS" , "KC_TRNS" , "KC_TRNS" , "MO(6)", - "KC_TRNS", "KC_TRNS" , "KC_TRNS" , "KC_TRNS" , "KC_RCTL" - - ], - ["KC_TAB" , "KC_MINS" , "KC_PLUS" , "KC_EQL" , "KC_SLSH" , "KC_ASTR", - "KC_COMM", "KC_7" , "KC_8" , "KC_9" , "KC_NO" , "KC_TRNS", - - "KC_NO" , "KC_LGUI" , "KC_LALT" , "KC_LCTL" , "KC_LSFT" , "KC_NO", - "KC_0" , "KC_1" , "KC_2" , "KC_3" , "KC_UNDS" , "KC_TRNS", - - "KC_TRNS", "KC_NO" , "KC_NO" , "KC_NO" , "KC_NO" , "KC_NO" , "KC_NO", - "KC_NO" , "KC_DOT" , "KC_4" , "KC_5" , "KC_6" , "KC_NO" , "KC_TRNS", - - "KC_TRNS", "KC_TRNS" , "KC_TRNS" , "KC_TRNS" , "KC_NO", - "KC_NO" , "KC_BSPC" , "KC_TRNS" , "KC_TRNS" , "KC_RCTL" - - ], - ["KC_NO" , "DF(0)" , "DF(1)" , "DF(2)" , "AG_SWAP" , "AG_NORM", - "KC_NO" , "KC_NO" , "KC_NO" , "KC_NO" , "KC_NO" , "KC_NO", - - "KC_NO" , "KC_NO" , "KC_NO" , "KC_NO" , "CL_SWAP" , "CL_NORM", - "RGB_MOD", "RGB_VAI" , "RGB_HUI" , "RGB_SAI" , "KC_NO" , "KC_NO", - - "QK_BOOT", "KC_NO" , "KC_NO" , "KC_NO" , "KC_NO" , "KC_NO" , "KC_NO", - "RGB_TOG", "RGB_RMOD" , "RGB_VAD" , "RGB_HUD" , "RGB_SAD" , "KC_NO" , "KC_NO", - - "KC_NO" , "KC_NO" , "KC_NO" , "KC_NO" , "KC_TRNS", - "KC_TRNS", "KC_NO" , "KC_NO" , "KC_NO" , "KC_NO" - - ] - ], - "author": "@mmccoyd" -} diff --git a/keyboards/handwired/hillside/0_1/keymaps/default/readme.md b/keyboards/handwired/hillside/0_1/keymaps/default/readme.md deleted file mode 100644 index 1890d5808c..0000000000 --- a/keyboards/handwired/hillside/0_1/keymaps/default/readme.md +++ /dev/null @@ -1,212 +0,0 @@ -# Default Keymap - -This default keymap follows many of the norms seen in non-programmable keyboards - to ease initial use of the Hillside keyboard. -It is a starting point for you to tweak over time to better suit _your_ preferences. -You can easily customize it with the - [QMK configurator](https://config.qmk.fm/#/hillside/0_1/LAYOUT) - or with the [via firmware](https://caniusevia.com). - -Some of its key features are: -- A mostly standard base layer with letters, some symbols, shift, modifier and delete keys - in the expected places for non-programmable keyboards. -- QWERTY, Colemak-DH and Dvorak options for the letter and symbol layout. -- Comfortable modifier and function or symbol combinations on the non-base layers - using modifiers on the home row of the navigation/edit, symbol/function and number-pad layers. -- Word navigation and cut/copy/paste keys on the navigation layer. -- A slightly optimized number pad with the more frequently used numbers on the home row. - -We've deliberately omitted some features: -- Combos: because the online configuration tools do not handle them - and because they would add to the initial learning curve, - as helpful to a keymap as a light sprinkling of combos can be. -- Multi-function mod-tap keys, auto shift capitalization and auto-exit modes such as CAPWORD or NUMWORD: - as they may be too large a step for someone new to programmable keyboards. - -## Base Layer - -``` -| TAB | Q | W | E | R | T |---------------------------| Y | U | I | O | P | BKSPC | -| CAPS | A | S | D | F | G |---------------------------| H | J | K | L | ; | ENTER | -| SHIFT | Z | X | C | V | B | ~ |---------------| ESC | N | M | , | . | / | SHIFT | ---------------|CTRL |-----| GUI | ALT | Num | Nav |---| Sym |SPACE| ALT | GUI |-----| ' |-------------- -``` - -The base layer provides a very standard key layout: - -- Return, Tab, backspace and shift keys in the outer columns. -- Alt/option and win/command keys on both thumbs, with the location swappable for windows or mac. -- A space key on the right thumb. - -The differences from a standard layout are: - -- There are three additional "shift" keys - to access the navigation/editing, symbol/function, and number layers. -- Esc and `~ are above the thumbs. -- The Menu and AltGr keys are on a layer. - -The default layout is QWERTY with alternatives of Dvorak and Colemak-DH -and the alt/option and win/command key locations are swappable for windows or mac. - -<details> -<summary>Details of Dvorak and Colemak-DH</summary> -The Dvorak and Colemak-DH base layers - have identical non-alpha and non-symbol keys as the QWERTY base layer. -In the Dvorak layout, the symbol key in the bottom row is the "/?" symbols - so that the same 12 symbols are taken care of on the base layer. - -``` -Dvorak -| TAB | ' | , | . | P | Y |---------------------------| F | G | C | R | L | BKSPC | -| CAPS | A | O | E | U | I |---------------------------| D | H | T | N | S | ENTER | -| SHIFT | ; | Q | J | K | X | ~ |---------------| ESC | B | M | W | V | Z | SHIFT | ---------------|CTRL |-----| GUI | ALT | Num | Nav |---| Sym |SPACE| ALT | GUI |-----| / |-------------- - -Colemak-DH -| TAB | Q | W | F | P | B |---------------------------| J | L | U | Y | ; | BKSPC | -| CAPS | A | R | S | T | G |---------------------------| M | N | E | I | O | ENTER | -| SHIFT | Z | X | C | D | V | ~ |---------------| ESC | K | H | , | . | / | SHIFT | ---------------|CTRL |-----| GUI | ALT | Num | Nav |---| Sym |SPACE| ALT | GUI |-----| ' |-------------- -``` -</details> - -## Navigation, Editing and Media Layer - -``` -| | INS | | | |VOL+ |---------------------------|PG_UP|HOME | | END| | DEL | -| | GUI | ALT |CTRL |SHIFT|VOL- |---------------------------|PG_DN|LEFT | UP |RIGHT| | ENTER | -| SHIFT |UNDO | CUT |COPY |PASTE|REDO |MUTE |---------------| ESC |RALT |WORDL|DOWN |WORDR|MENU | SHIFT | ---------------|CTRL |-----| GUI | ALT | Num | *** |---| Adj |BSPC | ALT | GUI |-----|CTRL |-------------- -``` -Holding down the Nav key accesses a navigation and editing layer: - -- Navigation arrows are on and below the right home row in a cross pattern. - This feels more natural for a column stagger keyboard than an inverted T. - The keys below that move left or right by a word. - Home, end, and page up/down are beside them. -- Modifiers in the left home row make it easier to use the arrows - to select text with the shift key or move between desktops or tabs. -- Editing keys appear on the lower left. - The edit keys, modifiers and arrows make it easy to move text around without leaving the layer. -- Delete is in the upper right, and a backspace key is on the thumb. -- The base layer modifiers and escape are in the same spots as on the base layer, - and a right-hand control key is added. -- Media volume and play keys are on the left, accessible with one hand. -- Menu and AltGr keys fill out the layer. -- A few keys do nothing and are available for more user-specific needs. - -## Symbol and Function Layer - -``` -| F11 | ! | @ | # | $ | % |---------------------------| ^ | & | * | ( | ) | BSPC | -| F12 | F1 | F2 | F3 | F4 | F5 |---------------------------| | |SHIFT|CTRL | ALT | GUI | ENTER | -| SHIFT | F6 | F7 | F8 | F9 | F10 |PRTSC|---------------| ESC | \ | [ | ] | { | } | SHIFT | ---------------|CTRL |-----| GUI | ALT | Num | Adj |---| *** |SPACE| ALT | GUI |-----|CTRL |-------------- -``` -Holding down the Sym key accesses a layer of symbol and function keys: - -- The symbols usually found on the number keys are in the top row. - If desired, you can use these positions for other things, - as the symbols are also accessible from the number pad layer with the shift key. -- Several more symbols appear on the right. -- The function keys are on the left, beginning with two rows of five. -- A row of modifiers in the home row allows the comfortable creation of any modifier and function key combination. -- The base layer modifier and escape keys are still available, as is a right-hand control key. - -## Number Pad and Algebraic Layer -``` -| TAB | - | + | = | / | * |---------------------------| . | 7 | 8 | 9 | | BSPC | -| | GUI | ALT |CTRL |SHIFT| |---------------------------| 0 | 1 | 2 | 3 | _ | ENTER | -| SHIFT | | | | | | |---------------| ESC | , | 4 | 5 | 6 | | SHIFT | ---------------|CTRL |-----| GUI | ALT | *** | |---| |BSPC | ALT | GUI |-----|CTRL |-------------- -``` -Holding down the Num key accesses a number pad and arithmetic symbols: - -- The number pad has the lowest numbers swapped into the home row as these are the most commonly used. -- A row of modifiers in the home row allows the comfortable creation of any modifier and number combination. -- Symbols commonly used with numbers fill out the layer - and can be combined with the home row mods or the existing base layer modifiers on the right hand. -- Several keys remain unused and await more user-specific needs. - - -## Adjust Layer -``` -| |QWERT|DVORK|COLMK|AG_SWAP|AG_NORM|-----------------------| | | | | | | -| | | | |CTR_S|CTR_N|---------------------------|MOD+ |BRI+ |HUE+ |SAT+ | | | -| QK_BOOT | | | | | | |--------------|RGBTOG|MOD- |BRI- |HUE- |SAT- | | | ---------------| |-----| | | | *** |---| *** | | | |-----| |-------------- -``` -Simultaneously holding down the Nav and Sym keys enables keys to adjust various keyboard settings: - -- The base layer can be set to QWERTY, Colemak-DH or Dvorak, - but the keyboard reverts to QWERTY each time it is plugged in. -- Alt/option and GUI/command can be swapped for mac users or restored to the windows norm. - This setting persists over power loss. -- The backlight LEDs can be enabled, disabled, and controlled. - These settings also persist over power loss. - - -## Make it Yours - -If you are coming from a traditional keyboard, - with a row-staggered layout and a large set of physical keys, - learning to use a column staggered (ergo) and layer-based keyboard, - which uses layers instead of finger reaches to access numbers, symbols and functions, - will be an adjustment for your muscle memory and your mental keyboard map. -This default layout tries to simplify that adjustment by keeping things in the expected spots when possible. - -Yet this layout is only a decent compromise and is not optimal for each user. - -The online configurator makes it easy to tweak this layout to your needs. -You can add additional layers or completely switch around what these do. - -Some changes you might consider making: -- Put some of your most-used key combinations on the unused keys on the navigation layer. -- If you are on a mac, switch the editing and word navigation keys from ctrl-x to cmd-x. -- Change the shift keys to one-shot shift keys, - where pressing and releasing them shifts the next key pressed. - That is much easier on your hands than holding them down. - Yet, they can still be held as usual if desired. -- Instead of holding down the thumb key to keep the symbol layer active, - you could use a one-shot layer key. - One-shot modifiers are likely less stress on your hands and may even be faster. - You would still be able to hold it down instead. -- Instead of holding down the key for the number pad layer, - you could make it a layer toggle, like caps lock is a capitalization toggle key. - -Here are some other keymaps for inspiration and ideas: -- The [Ferris default](https://github.com/qmk/qmk_firmware/tree/master/keyboards/ferris/keymaps/default) uses more advanced features as it has far fewer keys to work with. -- The [Miryoku](https://github.com/manna-harbour/miryoku/tree/master/docs/reference) keymap ensures that all modifiers are comfortably available with each character key. -- The [Kyria default](https://github.com/qmk/qmk_firmware/tree/master/keyboards/splitkb/kyria/keymaps/default) has different keymap choices and a couple more keys. - -A good metaphor is to think of your keymap as a bonsai tree that you tweak slightly over time - in response to ideas of how it might serve you better. - - -## Why no keymap.c - -Via and the online configurator provide straightforward visual ways to work with a simple layout, - and both use a .json keymap format. -So this default ```keymap.json``` was created with the online configurator - and formatted for easier reading and editing. - -If you wish, you can edit the ```keymap.json``` directly in a text editor, optionally use the below ```json2hill.py``` to restore the spacing, and then compile and flash it. - -Or, you can use the graphical configurator to edit the keymap. To do that: - -- Open the [QMK configurator](https://config.qmk.fm/#/handwired/hillside/LAYOUT) -- Using the green up arrow button, load the keymap from ```qmk_firmware/keyboards/handwired/hillside/keymaps/default/keymap.json``` -- Make the changes you wish to the layout -- Save the keymap using the green down arrow button. -- Copy those changes back into your QMK repository and reformat for easy reading using the format script: -``` -./keyboards/handwired/hillside/0_1/keymaps/json2hill.py --input <Your download directory>/default.json > ./keyboards/handwired/hillside/0_1/keymaps/default/keymap.json -``` - You may need to make that script executable with ```chmod +x```. After your keymap is safely copied and formated, you may want to remove the keymap from your download directory so later downloads will automatically receive the same file name. - -After either method of editing, compile and flash the keymap as usual. - -You can combine a .json based keymap with more advanced features specified in .c files - with a bit more complexity. -For example, see -[pierrec83's Kyria map](https://github.com/qmk/qmk_firmware/tree/master/keyboards/splitkb/kyria/keymaps/pierrec83). diff --git a/keyboards/handwired/hillside/48/48.c b/keyboards/handwired/hillside/48/48.c new file mode 100644 index 0000000000..a1d2c2f6e4 --- /dev/null +++ b/keyboards/handwired/hillside/48/48.c @@ -0,0 +1,4 @@ +// Copyright 2022 Michael McCoyd (@mmccoyd) +// SPDX-License-Identifier: GPL-2.0-or-later + +#include "48.h" diff --git a/keyboards/handwired/hillside/0_1/0_1.h b/keyboards/handwired/hillside/48/48.h index 0aeefdf630..65e1aaee30 100644 --- a/keyboards/handwired/hillside/0_1/0_1.h +++ b/keyboards/handwired/hillside/48/48.h @@ -1,4 +1,4 @@ -// Copyright 2021 Michael McCoyd (@mmccoyd) +// Copyright 2022 Michael McCoyd (@mmccoyd) // SPDX-License-Identifier: GPL-2.0-or-later #pragma once diff --git a/keyboards/handwired/hillside/0_1/config.h b/keyboards/handwired/hillside/48/config.h index c83b23d0e8..c83b23d0e8 100644 --- a/keyboards/handwired/hillside/0_1/config.h +++ b/keyboards/handwired/hillside/48/config.h diff --git a/keyboards/handwired/hillside/0_1/info.json b/keyboards/handwired/hillside/48/info.json index 7e128d5191..2325c2d8d3 100644 --- a/keyboards/handwired/hillside/0_1/info.json +++ b/keyboards/handwired/hillside/48/info.json @@ -2,7 +2,7 @@ "manufacturer": "mmccoyd", "maintainer": "mmccoyd", - "keyboard_name": "Hillside", + "keyboard_name": "Hillside48", "url": "http://github.com/mmccoyd/hillside/", "tags": ["split", "column stagger", "choc v1", "choc spaced" ], @@ -44,7 +44,7 @@ "LAYOUT": { "layout": [ - {"label": "Tab", "x": 0, "y": 0.93}, + {"label": "`", "x": 0, "y": 0.93}, {"label": "Q", "x": 1, "y": 0.93}, {"label": "W", "x": 2, "y": 0.31}, {"label": "E", "x": 3, "y": 0}, @@ -59,7 +59,7 @@ {"label": "Backspace", "x": 14.5, "y": 0.93}, - {"label": "Ctrl", "x": 0, "y": 1.93}, + {"label": "Tab", "x": 0, "y": 1.93}, {"label": "A", "x": 1, "y": 1.93}, {"label": "S", "x": 2, "y": 1.31}, {"label": "D", "x": 3, "y": 1}, @@ -71,7 +71,7 @@ {"label": "K", "x": 11.5, "y": 1}, {"label": "L", "x": 12.5, "y": 1.31}, {"label": ";", "x": 13.5, "y": 1.93}, - {"label": "'", "x": 14.5, "y": 1.93}, + {"label": "Enter", "x": 14.5, "y": 1.93}, {"label": "Shift", "x": 0, "y": 2.93}, @@ -80,9 +80,9 @@ {"label": "C", "x": 3, "y": 2}, {"label": "V", "x": 4, "y": 2.28}, {"label": "B", "x": 5, "y": 2.42}, - {"label": "`", "x": 6, "y": 2.78}, + {"label": "Esc", "x": 6, "y": 2.78}, - {"label": "Esc", "x": 8.5, "y": 2.78}, + {"label": "Caps", "x": 8.5, "y": 2.78}, {"label": "N", "x": 9.5, "y": 2.42}, {"label": "M", "x": 10.5, "y": 2.28}, {"label": ",", "x": 11.5, "y": 2}, @@ -91,18 +91,18 @@ {"label": "Shift", "x": 14.5, "y": 2.93}, - {"label": "Enter", "x": 2, "y": 3.31}, + {"label": "Ctrl", "x": 2, "y": 3.31}, {"label": "Gui", "x": 3.5, "y": 3.28}, {"label": "Alt", "x": 4.5, "y": 3.42}, - {"label": "Num", "x": 5.5, "y": 3.78}, - {"label": "Nav", "x": 6.5, "y": 4.14}, + {"label": "Sym", "x": 5.5, "y": 3.78}, + {"label": "Shift", "x": 6.5, "y": 4.14}, - {"label": "Sym", "x": 8, "y": 4.14}, + {"label": "Nav", "x": 8, "y": 4.14}, {"label": "Space", "x": 9, "y": 3.78}, {"label": "Alt", "x": 10, "y": 3.42}, {"label": "Gui", "x": 11, "y": 3.28}, - {"label": "App", "x": 12.5, "y": 3.31} + {"label": "'", "x": 12.5, "y": 3.31} ] } } diff --git a/keyboards/handwired/hillside/48/keymaps/default/config.h b/keyboards/handwired/hillside/48/keymaps/default/config.h new file mode 100644 index 0000000000..1f71d42e67 --- /dev/null +++ b/keyboards/handwired/hillside/48/keymaps/default/config.h @@ -0,0 +1,9 @@ +// Copyright 2022 Michael McCoyd (@mmccoyd) +// SPDX-License-Identifier: GPL-2.0-or-later + +#pragma once + +// Some boards have issues detecting handedness using the vbus voltage, +// such as Elite-C v3, but not v3.1 on, and apparently some ProMicro boards. +// For those boards, use usb detection instead. +// #define SPLIT_USB_DETECT diff --git a/keyboards/handwired/hillside/48/keymaps/default/keymap.json b/keyboards/handwired/hillside/48/keymaps/default/keymap.json new file mode 100644 index 0000000000..364ab726a0 --- /dev/null +++ b/keyboards/handwired/hillside/48/keymaps/default/keymap.json @@ -0,0 +1,88 @@ +{ "version": 1, + "notes": "", + "documentation": "\"This file is a QMK Configurator export. You can import this at <https://config.qmk.fm>. It can also be used directly with QMK's source code.\n\nTo setup your QMK environment check out the tutorial: <https://docs.qmk.fm/#/newbs>\n\nYou can convert this file to a keymap.c using this command: `qmk json2c {keymap}`\n\nYou can compile this keymap using this command: `qmk compile {keymap}`\"\n", + "keyboard": "handwired/hillside/48", + "keymap": "default", + "layout": "LAYOUT", + "layers": [ + ["KC_GRV" , "KC_Q" , "KC_W" , "KC_E" , "KC_R" , "KC_T", + "KC_Y" , "KC_U" , "KC_I" , "KC_O" , "KC_P" , "KC_BSPC", + + "KC_TAB" , "KC_A" , "KC_S" , "KC_D" , "KC_F" , "KC_G", + "KC_H" , "KC_J" , "KC_K" , "KC_L" , "KC_SCLN" , "KC_ENT", + + "KC_LSFT" , "KC_Z" , "KC_X" , "KC_C" , "KC_V" , "KC_B" , "KC_ESC", + "CAPS_WORD" , "KC_N" , "KC_M" , "KC_COMM", "KC_DOT" , "KC_SLSH" , "KC_RSFT", + + "KC_LCTL" , "KC_LGUI" , "KC_LALT", "MO(3)" , "OSM(MOD_LSFT)", + "MO(4)" , "KC_SPC" , "KC_LALT", "KC_RGUI", "KC_QUOT" + + ], + ["KC_GRV" , "KC_QUOT" , "KC_COMM", "KC_DOT" , "KC_P" , "KC_Y", + "KC_F" , "KC_G" , "KC_C" , "KC_R" , "KC_L" , "KC_BSPC", + + "KC_TAB" , "KC_A" , "KC_O" , "KC_E" , "KC_U" , "KC_I", + "KC_D" , "KC_H" , "KC_T" , "KC_N" , "KC_S" , "KC_ENT", + + "KC_LSFT" , "KC_SCLN" , "KC_Q" , "KC_J" , "KC_K" , "KC_X" , "KC_ESC", + "CAPS_WORD" , "KC_B" , "KC_M" , "KC_W" , "KC_V" , "KC_Z" , "KC_RSFT", + + "KC_LCTL" , "KC_LGUI" , "KC_LALT", "MO(3)" , "OSM(MOD_LSFT)", + "MO(4)" , "KC_SPC" , "KC_LALT", "KC_RGUI", "KC_SLSH" + + ], + ["KC_GRV" , "KC_Q" , "KC_W" , "KC_F" , "KC_P" , "KC_B", + "KC_J" , "KC_L" , "KC_U" , "KC_Y" , "KC_SCLN" , "KC_BSPC", + + "KC_TAB" , "KC_A" , "KC_R" , "KC_S" , "KC_T" , "KC_G", + "KC_M" , "KC_N" , "KC_E" , "KC_I" , "KC_O" , "KC_ENT", + + "KC_LSFT" , "KC_Z" , "KC_X" , "KC_C" , "KC_D" , "KC_V" , "KC_ESC", + "CAPS_WORD" , "KC_K" , "KC_H" , "KC_COMM", "KC_DOT" , "KC_SLSH" , "KC_RSFT", + + "KC_LCTL" , "KC_LGUI" , "KC_LALT", "MO(3)" , "OSM(MOD_LSFT)", + "MO(4)" , "KC_SPC" , "KC_LALT", "KC_RGUI", "KC_QUOT" + + ], + ["KC_HOME" , "KC_EXLM" , "KC_AT" , "KC_HASH", "KC_DLR" , "KC_PERC", + "KC_CIRC" , "KC_AMPR" , "KC_ASTR", "KC_LPRN", "KC_RPRN" , "KC_DEL", + |