diff options
Diffstat (limited to 'keyboards/handwired/unicomp_mini_m')
| -rw-r--r-- | keyboards/handwired/unicomp_mini_m/config.h | 51 | ||||
| -rw-r--r-- | keyboards/handwired/unicomp_mini_m/info.json | 113 | ||||
| -rw-r--r-- | keyboards/handwired/unicomp_mini_m/keymaps/default/keymap.c | 106 | ||||
| -rw-r--r-- | keyboards/handwired/unicomp_mini_m/keymaps/default/readme.md | 1 | ||||
| -rw-r--r-- | keyboards/handwired/unicomp_mini_m/readme.md | 127 | ||||
| -rw-r--r-- | keyboards/handwired/unicomp_mini_m/rules.mk | 18 | ||||
| -rw-r--r-- | keyboards/handwired/unicomp_mini_m/unicomp_mini_m.c | 16 | ||||
| -rw-r--r-- | keyboards/handwired/unicomp_mini_m/unicomp_mini_m.h | 49 |
8 files changed, 0 insertions, 481 deletions
diff --git a/keyboards/handwired/unicomp_mini_m/config.h b/keyboards/handwired/unicomp_mini_m/config.h deleted file mode 100644 index 77e2d1c7ea..0000000000 --- a/keyboards/handwired/unicomp_mini_m/config.h +++ /dev/null @@ -1,51 +0,0 @@ -/* -Copyright 2021 stevendlander - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#pragma once - -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 12 -#define MATRIX_COLS 16 - -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * -*/ -#define MATRIX_ROW_PINS { F7, F6, F5, F4, F3, F2, F1, F0, E6, E7, B0, B1 } -#define MATRIX_COL_PINS { C7, C6, C5, C4, C3, C2, C1, C0, E1, E0, D7, B7, D5, D4, D3, D2 } - -#define LED_PIN_ON_STATE 0 -#define LED_NUM_LOCK_PIN B6 -#define LED_CAPS_LOCK_PIN B5 -#define LED_SCROLL_LOCK_PIN B4 - -/* COL2ROW, ROW2COL*/ -#define DIODE_DIRECTION ROW2COL - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed (5 is default) */ -#define DEBOUNCE 5 - -/* The Mini M has no diodes */ -#define MATRIX_HAS_GHOST diff --git a/keyboards/handwired/unicomp_mini_m/info.json b/keyboards/handwired/unicomp_mini_m/info.json deleted file mode 100644 index ea2ab10b1b..0000000000 --- a/keyboards/handwired/unicomp_mini_m/info.json +++ /dev/null @@ -1,113 +0,0 @@ -{ - "keyboard_name": "Unicomp Mini M", - "manufacturer": "stevendlander", - "url": "", - "maintainer": "stevendlander", - "usb": { - "vid": "0xFEED", - "pid": "0x0000", - "device_version": "0.0.1" - }, - "layouts": { - "LAYOUT": { - "layout": [ - {"label":"Esc", "x":0, "y":0}, - {"label":"F1", "x":2, "y":0}, - {"label":"F2", "x":3, "y":0}, - {"label":"F3", "x":4, "y":0}, - {"label":"F4", "x":5, "y":0}, - {"label":"F5", "x":6.5, "y":0}, - {"label":"F6", "x":7.5, "y":0}, - {"label":"F7", "x":8.5, "y":0}, - {"label":"F8", "x":9.5, "y":0}, - {"label":"F9", "x":11, "y":0}, - {"label":"F10", "x":12, "y":0}, - {"label":"F11", "x":13, "y":0}, - {"label":"F12", "x":14, "y":0}, - {"label":"Pause / SysReq", "x":15.5, "y":0}, - {"label":"Scroll Lock / Num Lock", "x":16.5, "y":0}, - {"label":"Pause / Reset", "x":17.5, "y":0}, - - {"label":"`", "x":0, "y":2}, - {"label":"1", "x":1, "y":2}, - {"label":"2", "x":2, "y":2}, - {"label":"3", "x":3, "y":2}, - {"label":"4", "x":4, "y":2}, - {"label":"5", "x":5, "y":2}, - {"label":"6", "x":6, "y":2}, - {"label":"7", "x":7, "y":2}, - {"label":"8", "x":8, "y":2}, - {"label":"9", "x":9, "y":2}, - {"label":"0", "x":10, "y":2}, - {"label":"-", "x":11, "y":2}, - {"label":"=", "x":12, "y":2}, - {"label":"No", "x":13, "y":2}, - {"label":"Backspace", "x":14, "y":2}, - {"label":"Insert", "x":15.5, "y":2}, - {"label":"Home", "x":16.5, "y":2}, - {"label":"Page Up", "x":17.5, "y":2}, - - {"label":"Tab", "x":0, "y":3, "w":1.5}, - {"label":"Q", "x":1.5, "y":3}, - {"label":"W", "x":2.5, "y":3}, - {"label":"E", "x":3.5, "y":3}, - {"label":"R", "x":4.5, "y":3}, - {"label":"T", "x":5.5, "y":3}, - {"label":"Y", "x":6.5, "y":3}, - {"label":"U", "x":7.5, "y":3}, - {"label":"I", "x":8.5, "y":3}, - {"label":"O", "x":9.5, "y":3}, - {"label":"P", "x":10.5, "y":3}, - {"label":"[", "x":11.5, "y":3}, - {"label":"]", "x":12.5, "y":3}, - {"label":"\\", "x":13.5, "y":3, "w":1.5}, - {"label":"Delete", "x":15.5, "y":3}, - {"label":"End", "x":16.5, "y":3}, - {"label":"Page Down", "x":17.5, "y":3}, - - {"label":"Caps Lock", "x":0, "y":4, "w":1.75}, - {"label":"A", "x":1.75, "y":4}, - {"label":"S", "x":2.75, "y":4}, - {"label":"D", "x":3.75, "y":4}, - {"label":"F", "x":4.75, "y":4}, - {"label":"G", "x":5.75, "y":4}, - {"label":"H", "x":6.75, "y":4}, - {"label":"J", "x":7.75, "y":4}, - {"label":"K", "x":8.75, "y":4}, - {"label":"L", "x":9.75, "y":4}, - {"label":";", "x":10.75, "y":4}, - {"label":"'", "x":11.75, "y":4}, - {"label":"No", "x":12.75, "y":4}, - {"label":"Enter", "x":13.75, "y":4, "w":1.25}, - - {"label":"Shift", "x":0, "y":5, "w":1.25}, - {"label":"No", "x":1.25, "y":5}, - {"label":"Z", "x":2.25, "y":5}, - {"label":"X", "x":3.25, "y":5}, - {"label":"C", "x":4.25, "y":5}, - {"label":"V", "x":5.25, "y":5}, - {"label":"B", "x":6.25, "y":5}, - {"label":"N", "x":7.25, "y":5}, - {"label":"M", "x":8.25, "y":5}, - {"label":",", "x":9.25, "y":5}, - {"label":".", "x":10.25, "y":5}, - {"label":"/", "x":11.25, "y":5}, - {"label":"No", "x":12.25, "y":5}, - {"label":"Shift", "x":13.25, "y":5, "w":1.75}, - {"label":"Up", "x":16.5, "y":5}, - - {"label":"Ctrl", "x":0, "y":6, "w":1.5}, - {"label":"GUI", "x":1.5, "y":6}, - {"label":"Alt", "x":2.5, "y":6, "w":1.5}, - {"label":"Space", "x":4, "y":6, "w":6}, - {"label":"Alt", "x":10, "y":6}, - {"label":"GUI", "x":11, "y":6, "w":1.5}, - {"label":"App", "x":12.5, "y":6}, - {"label":"Ctrl", "x":13.5, "y":6, "w":1.5}, - {"label":"Left", "x":15.5, "y":6}, - {"label":"Down", "x":16.5, "y":6}, - {"label":"Right", "x":17.5, "y":6} - ] - } - } -} diff --git a/keyboards/handwired/unicomp_mini_m/keymaps/default/keymap.c b/keyboards/handwired/unicomp_mini_m/keymaps/default/keymap.c deleted file mode 100644 index 068c6c4b60..0000000000 --- a/keyboards/handwired/unicomp_mini_m/keymaps/default/keymap.c +++ /dev/null @@ -1,106 +0,0 @@ -/* Copyright 2021 stevendlander - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ -#include QMK_KEYBOARD_H - -// Layer shortcuts -enum custom_layers { - _QWERTY, - _NUMPAD, -}; - -enum custom_keycodes { - NUMSLCK = SAFE_RANGE, // Num Lock on shift, Scroll Lock regularly - PAUSRST, // Resets keyboard on shift, Pause|break regularly - PSCSYSR, // Sends SYSREQ on alt, Print Screen regularly -}; - -// Mod key detection -#define MODS_SHIFT_MASK (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)) -#define MODS_ALT_MASK (MOD_BIT(KC_LALT)|MOD_BIT(KC_RALT)) - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [_QWERTY] = LAYOUT( - KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, PSCSYSR, NUMSLCK, PAUSRST, - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_NO, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NO, KC_ENT, - KC_LSFT, KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_NO, KC_RSFT, KC_UP, - KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_APP, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT - ), - [_NUMPAD] = LAYOUT( - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, NUMSLCK, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_P7, KC_P8, KC_P9, KC_TRNS, KC_PMNS, KC_PPLS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_P4, KC_P5, KC_P6, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_P1, KC_P2, KC_P3, KC_PAST, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_P0, KC_TRNS, KC_PDOT, KC_PSLS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS - ), -}; - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - switch (keycode) { - case NUMSLCK: { - if (record->event.pressed) { - if (keyboard_report->mods & MODS_SHIFT_MASK) { - tap_code(KC_NLCK); - } else { - register_code(KC_SLCK); - } - } else { - unregister_code(KC_SLCK); - } - break; - } - case PAUSRST: { - if (record->event.pressed) { - if (keyboard_report->mods & MODS_SHIFT_MASK) { - reset_keyboard(); - } else { - register_code(KC_PAUS); - } - } else { - unregister_code(KC_PAUS); - } - break; - } - case PSCSYSR: { - if (record->event.pressed) { - if (keyboard_report->mods & MODS_ALT_MASK) { - tap_code(KC_SYSREQ); - } else { - register_code(KC_PAUS); - } - } else { - unregister_code(KC_PAUS); - } - break; - } - } - return true; -} - -bool led_update_user(led_t led_state) { - static bool num_state = false; - if (num_state != led_state.num_lock) { - if (led_state.num_lock) { - layer_on(_NUMPAD); - } else { - layer_off(_NUMPAD); - } - num_state = led_state.num_lock; - } - return true; -} diff --git a/keyboards/handwired/unicomp_mini_m/keymaps/default/readme.md b/keyboards/handwired/unicomp_mini_m/keymaps/default/readme.md deleted file mode 100644 index f15b1b50d3..0000000000 --- a/keyboards/handwired/unicomp_mini_m/keymaps/default/readme.md +++ /dev/null @@ -1 +0,0 @@ -# The default keymap for unicomp\_mini\_m diff --git a/keyboards/handwired/unicomp_mini_m/readme.md b/keyboards/handwired/unicomp_mini_m/readme.md deleted file mode 100644 index 0640fbb250..0000000000 --- a/keyboards/handwired/unicomp_mini_m/readme.md +++ /dev/null @@ -1,127 +0,0 @@ -## Unicomp Mini M with Teensy2.0++ controller & QMK Firmware - -### Overview - -#### Goals - -The goal of this project was to replace the stock control board of the Unicomp Mini M with a programmable one. The Mini -M was released by [Unicomp](https://www.pckeyboard.com) in Q1 of 2021 and is a re-release of The IBM Model M Space -Saving Keyboard (SSK) with some enhancements. - -This guide strives to achieve the following: - -* Make completely reversable changes, or in other words, no permanent modifications to the Mini M -* Allow full programmability of the Mini M via QMK -* Be able to flash firmware without having to take the board apart to hit the reset button -* Create a default keymap that works just like the stock keymap shipped from Unicomp, including the toggle-able number - pad -* Support all LEDs as normal - -My guide will go a few steps further: - -* Convert the wired connection from USB-A to USB-C -* Install a potentiometer to dim the LEDs if desired - -#### Credits - -The following resources were instrumental to the success of this project: - -* Model M 101/102 write-up located in `qmk_firmware/keyboards/converter/modelm` -* [Model M Subreddit](https://modelm.reddit.com) -* Model M Discord - -### Hardware - -##### Parts - -For a working Mini M with QMK *without* LEDs working, the following parts are necessary: - -* 1 Adafruit Perma-Proto Full Sized Breadboard. Luckily, this board is a perfect fit for the Mini M case! -* 1 Teensy2.0++, with headers soldered on if you can find it - * 2 20-row x 1 column headers, if you can't find a Teensy with headers already soldered on -* 2 16-pin Ribbon connectors, PCB mount -* Hookup wire. I used 30AWG wire and while it worked, I should have used 1 gauge (or more) thicker -* A panel mount male USB-B to female USB-C extender - -To get the Mini M working with LEDs, you will need: - -* 3 1kOhm through-hole resistors - -##### Tools - -The following were absolutely critical for the project: - -* Soldering iron, preferably one with a narrow tip for small connections -* Drill, preferably a hand-held rotary tool (such as a Dremel) -* Wire strippers/cutters -* A sharp knife - -Optional, but worth having around: - -* Helping-hands, PCB holder, preferably both -* Multi-meter for testing continuity of your connections -* Hot-glue gun for mounting the USB extender to the Perma-Proto - -### Assembly - -#### Solder Teensy to the Perma-Proto - -1. Solder headers to Teensy -2. Solder headers to Perma-Proto - -#### Solder ribbon connectors - -* Rows on the Perma-Proto that line up with membrane ribbons -* Trim excess under board -* Test continuity - -#### Solder in hookup wires - -* Ribbon connector used for the right ribbon will need hookup wire to establish connections to the Teensy -* 12 required, 16 if you want full functionality - -#### Optional: Solder in resistors - -#### Caveat: D6 pin on the Teensy - -There are a few ways to mount the Teensy to the Perma-Proto board. I chose to connect my 16 pin ribbon connector to the -Teensy pins starting at C7 and ending at D2. If you do this, beware that pin D6 will not work for the purposes of this -project. It is possible to modify it to make it so, but that is beyond the scope of this guide. - -Bypassing D6 is necessary if you mount your ribbon connector as I have just described. Luckily, it is a simple process! -First, with a sharp knife, sever the connection between your ribbon connector pin that is connected to Teensy D6 pin. I -would recommend doing this at the closest possible point to the Teensy on the underside of the Perma-Proto board. Once -that is done, use a remaining point on the Perma-Proto bus for that ribbon connection (that was previously connected to -D6) to add a jumper wire connected to pin B7. If you are using the firmware files provided in this repository, -everything is already set for this configuration. - -### Testing - -### Software - -#### Build firmware - -See qmk documentation on getting your build environment working. - -Compile the Mini M firmware files with the default keymap. It allows for the Mini M to be used with the same -functionality as shipped from the manufacturer. - -```bash -$ qmk compile -kb unicomp/mini_m -km default -``` - -While plugged in, press the reset button on your Teensy and then: - -```bash -$ qmk flash -kb unicomp/mini_m -km default -``` - -If everything works to this point, congratulations! You now have a programmable Mini M. If you are using the default -keymap, you can reset your Teensy by pressing Shift+Pause together, eliminating the need to take apart the case in order -to do so. - -#### Keymaps - -To build your own keymap, create a new directory in `keyboards/unicomp/mini_m/keymaps/<your name>`, copy the files from -`keyboards/unicomp/mini_m/default` into your new directory, and edit them as you wish. When you are ready to flash your -new keymap to the Mini M, the command will be `qmk flash -kb unicomp/mini_m -kb <your name>`. diff --git a/keyboards/handwired/unicomp_mini_m/rules.mk b/keyboards/handwired/unicomp_mini_m/rules.mk deleted file mode 100644 index 69f5cb2d79..0000000000 --- a/keyboards/handwired/unicomp_mini_m/rules.mk +++ /dev/null @@ -1,18 +0,0 @@ -# MCU name -MCU = at90usb1286 - -# Bootloader selection -BOOTLOADER = halfkay - -# Build Options -# change yes to no to disable -# -BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite -MOUSEKEY_ENABLE = no # Mouse keys -EXTRAKEY_ENABLE = no # Audio control and System control -CONSOLE_ENABLE = yes # Console for debug -COMMAND_ENABLE = no # Commands for debug and configuration -NKRO_ENABLE = no # Enable N-Key Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -AUDIO_ENABLE = no # Audio output diff --git a/keyboards/handwired/unicomp_mini_m/unicomp_mini_m.c b/keyboards/handwired/unicomp_mini_m/unicomp_mini_m.c deleted file mode 100644 index e8249df251..0000000000 --- a/keyboards/handwired/unicomp_mini_m/unicomp_mini_m.c +++ /dev/null @@ -1,16 +0,0 @@ -/* Copyright 2021 stevendlander - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ -#include "unicomp_mini_m.h" diff --git a/keyboards/handwired/unicomp_mini_m/unicomp_mini_m.h b/keyboards/handwired/unicomp_mini_m/unicomp_mini_m.h deleted file mode 100644 index 8e426da051..0000000000 --- a/keyboards/handwired/unicomp_mini_m/unicomp_mini_m.h +++ /dev/null @@ -1,49 +0,0 @@ -/* Copyright 2021 stevendlander - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ -#pragma once - -#include "quantum.h" - -/* This a shortcut to help you visually see your layout. - * The first section contains "names" for physical keys of the keyboard - * and defines their position on the board. - * The second section defines position of the keys on the switch matrix - * (where COLUMNS and ROWS crosses). */ - -#define LAYOUT( \ - K5A, K5B, K5C, K5D, K5E, K5F, K5G, K5H, K5I, K5J, K5K, K5L, K5M, K5N, K5O, K5P, \ - \ - K4A, K4B, K4C, K4D, K4E, K4F, K4G, K4H, K4I, K4J, K4K, K4L, K4M, K4N, K4O, K4P, K4Q, K4R, \ - K3A, K3B, K3C, K3D, K3E, K3F, K3G, K3H, K3I, K3J, K3K, K3L, K3M, K3N, K3O, K3P, K3Q, \ - K2A, K2B, K2C, K2D, K2E, K2F, K2G, K2H, K2I, K2J, K2K, K2L, K2M, K2N, \ - K1A, K1B, K1C, K1D, K1E, K1F, K1G, K1H, K1I, K1J, K1K, K1L, K1M, K1N, K1O, \ - K0A, K0B, K0C, K0D, K0E, K0F, K0G, K0H, K0I, K0J, K0K \ -) \ -{ \ -/* 00 */ { K4A, K5A, K4F, K1M, K5C, K5D, K5E, K3K, KC_NO, KC_NO, KC_NO, KC_NO, K0C, K2N, KC_NO, KC_NO }, \ -/* 01 */ { K2A, K1B, K3B, KC_NO, KC_NO, KC_NO, KC_NO, K4G, K5F, KC_NO, KC_NO, KC_NO, KC_NO, K2M, K0H, K1N, }, \ -/* 02 */ { K2C, K2D, K5B, K2E, K2F, K1C, K1E, KC_NO, K1D, K1F, K1G, K2B, K3A, KC_NO, KC_NO, KC_NO }, \ -/* 03 */ { KC_NO, KC_NO, K4B, KC_NO, KC_NO, KC_NO, KC_NO, K3G, K5G, KC_NO, KC_NO, K0B, KC_NO, KC_NO, KC_NO, KC_NO }, \ -/* 04 */ { KC_NO, KC_NO, K4E, KC_NO, KC_NO, KC_NO, KC_NO, K3J, K5H, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, K0A, K1A, }, \ -/* 05 */ { KC_NO, KC_NO, K3C, KC_NO, KC_NO, KC_NO, KC_NO, K4H, K5I, K3L, K0F, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \ -/* 06 */ { KC_NO, KC_NO, K4C, KC_NO, KC_NO, KC_NO, KC_NO, K3H, K5J, K4M, K5K, K5L, K4L, K5N, KC_NO, KC_NO }, \ -/* 07 */ { KC_NO, KC_NO, K4D, KC_NO, KC_NO, KC_NO, KC_NO, K3I, KC_NO, KC_NO, KC_NO, K5M, K4N, K5O, KC_NO, KC_NO }, \ -/* 08 */ { KC_NO, KC_NO, K3F, KC_NO, KC_NO, KC_NO, KC_NO, K4K, KC_NO, K4O, K1O, K3P, K4P, KC_NO, KC_NO, KC_NO }, \ -/* 09 */ { KC_NO, KC_NO, K3E, K0E, K0I, KC_NO, KC_NO, K4J, KC_NO, K3N, KC_NO, KC_NO, KC_NO, K4Q, KC_NO, KC_NO }, \ -/* 0A */ { K0D, KC_NO, K3D, KC_NO, K0G, KC_NO, KC_NO, K4I, KC_NO, K3M, K0K, K0J, K4R, K3Q, KC_NO, KC_NO }, \ -/* 0B */ { K1I, K1J, KC_NO, K1K, K1L, K2G, K2I, KC_NO, K2H, K2J, K2K, K1H, K2L, K3O, KC_NO, K5P, }, \ -} -/* 0 1 2 3 4 5 6 7 8 9 A B C D E F */ |