diff options
Diffstat (limited to 'keyboards/handwired/t111/readme.md')
| -rw-r--r-- | keyboards/handwired/t111/readme.md | 45 |
1 files changed, 0 insertions, 45 deletions
diff --git a/keyboards/handwired/t111/readme.md b/keyboards/handwired/t111/readme.md deleted file mode 100644 index 31bbc2a728..0000000000 --- a/keyboards/handwired/t111/readme.md +++ /dev/null @@ -1,45 +0,0 @@ -# QMK-based firmware for Fujitsu N860-2500-T111 keyboard - - - -Fujitsu N860-2500-T111 keyboard conversion project: direct connection of Black Pill to the matrix. - -* Keyboard Maintainer: [DmNosachev](https://github.com/DmNosachev) -* Hardware Supported: [Fujitsu N860-2500-T111](https://deskthority.net/viewtopic.php?t=17087), Black Pill STM32F103C8T6 MCU board. Alternatively you can use any MCU which is supported by QMK and has 22 or more IO pins: Arduino Micro, Teensy 2.0, Teensy 2.0++, Blue Pill, etc. -* Thanks to Deskthority user *OldIsNew* for the matrix decoding. - -Make example for this keyboard (after setting up your build environment): - - make handwired/t111:default - -See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). - -# Modding - -## Matrix - -Fujitsu N860-2500-T111 has 14x8 matrix. It's ghost-free thanks to the diodes. - -Rows (0-7) and columns (0-D): - - -## Black Pill -Suggested mount position for the Black Pill (view from the top side of the PCB): - -``` - C1 C2 C3 C4 C7 C8 C9 CA R5 R6 -,--------------------------------------------------------------------, -|B11 B10 B1 B0 A7 A6 A5 A4 A3 A2 A1 A0 RST C13 B9 B8 GND |---, -| |USB| -|B12 B13 B14 B15 A8 A9 A10 A11 A12 A15 B3 B4 B5 B6 B7 3V3 GND |---' -'--------------------------------------------------------------------' - CC CD C0 CB C6 C5 R0 R4 R3 R2 R1 R7 -``` - - - -1. Desolder all ICs, capacitors and resistors. -1. Solder 4-pin SWD header to Black Pill. -2. Burn [STM32duino bootloader](https://github.com/rogerclarkmelbourne/STM32duino-bootloader/blob/master/bootloader_only_binaries/generic_boot20_pb12.bin) to Black Pill. -3. Compile and flash the firmware: `make handwired/t111:default:flash` -4. Connect rows and columns to the corresponding pins of the Black Pill. |