summaryrefslogtreecommitdiffstats
path: root/keyboards/handwired/sono1/config.h
diff options
context:
space:
mode:
Diffstat (limited to 'keyboards/handwired/sono1/config.h')
-rw-r--r--keyboards/handwired/sono1/config.h74
1 files changed, 5 insertions, 69 deletions
diff --git a/keyboards/handwired/sono1/config.h b/keyboards/handwired/sono1/config.h
index 9ccc496e17..3b06342a1a 100644
--- a/keyboards/handwired/sono1/config.h
+++ b/keyboards/handwired/sono1/config.h
@@ -1,5 +1,5 @@
/*
-Copyright 2020 DmNosachev
+Copyright 2021 DmNosachev
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
@@ -30,80 +30,12 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define MATRIX_ROWS 15
#define MATRIX_COLS 8
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { A5, B3, A9, A10, B13, B14, B15, A8, B7, B8, B9, C13, A15, A0, A1 }
-#define MATRIX_COL_PINS { A4, A3, B11, B10, B1, B0, A7, A6 }
-#define UNUSED_PINS { A5 }
-
-#define LED_KANA_PIN A2
-#define LED_CAPS_LOCK_PIN B5
-#define LED_CTRL_XFER_PIN B6
-#define LED_NUM_LOCK_PIN B4
-#define LED_KB_LOCK_PIN B12
-#define LED_PIN_ON_STATE 0
-
/* COL2ROW, ROW2COL */
#define DIODE_DIRECTION COL2ROW
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
#define DEBOUNCE 5
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is useful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-//#define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
- * Feature disable options
- * These options are also useful to firmware size reduction.
- */
-
-/* disable debug print */
-//#define NO_DEBUG
-
-/* disable print */
-//#define NO_PRINT
-
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT
-
/* disable these deprecated features by default */
#define NO_ACTION_MACRO
#define NO_ACTION_FUNCTION
@@ -111,3 +43,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
/* Bootmagic Lite key configuration */
#define BOOTMAGIC_LITE_ROW 0
#define BOOTMAGIC_LITE_COLUMN 0
+
+/* mechanical locking support. NumLock key on the numpad uses Alps SKCL Lock switch */
+#define LOCKING_SUPPORT_ENABLE
+#define LOCKING_RESYNC_ENABLE \ No newline at end of file