summaryrefslogtreecommitdiffstats
path: root/keyboards/handwired/mutepad
diff options
context:
space:
mode:
Diffstat (limited to 'keyboards/handwired/mutepad')
-rw-r--r--keyboards/handwired/mutepad/config.h90
-rw-r--r--keyboards/handwired/mutepad/info.json15
-rw-r--r--keyboards/handwired/mutepad/keymaps/default/keymap.c43
-rw-r--r--keyboards/handwired/mutepad/keymaps/default/readme.md1
-rw-r--r--keyboards/handwired/mutepad/mutepad.c4
-rw-r--r--keyboards/handwired/mutepad/mutepad.h19
-rw-r--r--keyboards/handwired/mutepad/readme.md33
-rw-r--r--keyboards/handwired/mutepad/rules.mk19
8 files changed, 224 insertions, 0 deletions
diff --git a/keyboards/handwired/mutepad/config.h b/keyboards/handwired/mutepad/config.h
new file mode 100644
index 0000000000..7113063223
--- /dev/null
+++ b/keyboards/handwired/mutepad/config.h
@@ -0,0 +1,90 @@
+// Copyright 2022 JoshwJB (@JoshwJB)
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0xFEED
+#define PRODUCT_ID 0x0000
+#define DEVICE_VER 0x0001
+#define MANUFACTURER JoshwJB
+#define PRODUCT MutePad
+
+/* key matrix size */
+#define MATRIX_ROWS 1
+#define MATRIX_COLS 4
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+ */
+#define MATRIX_ROW_PINS \
+ { F6 }
+#define MATRIX_COL_PINS \
+ { B1, B3, B2, B6 }
+#define UNUSED_PINS
+
+/* encoder support */
+#define ENCODERS_PAD_A \
+ { F4 }
+#define ENCODERS_PAD_B \
+ { F5 }
+
+#define ENCODER_RESOLUTION 2
+
+#define TAP_CODE_DELAY 10
+
+/* COL2ROW, ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+#define FORCE_NKRO
+
+/*
+ * Feature disable options
+ * These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* Bootmagic Lite key configuration */
+#define BOOTMAGIC_LITE_ROW 0
+#define BOOTMAGIC_LITE_COLUMN 0
diff --git a/keyboards/handwired/mutepad/info.json b/keyboards/handwired/mutepad/info.json
new file mode 100644
index 0000000000..b4a75a10e2
--- /dev/null
+++ b/keyboards/handwired/mutepad/info.json
@@ -0,0 +1,15 @@
+{
+ "keyboard_name": "MutePad",
+ "url": "https://github.com/JoshwJB/MutePad",
+ "maintainer": "JoshwJB",
+ "layouts": {
+ "LAYOUT": {
+ "layout": [
+ {"label": "k00", "x": 0, "y": 0},
+ {"label": "k01", "x": 1, "y": 0},
+ {"label": "k02", "x": 2, "y": 0},
+ {"label": "k03", "x": 3, "y": 0},
+ ]
+ }
+ }
+}
diff --git a/keyboards/handwired/mutepad/keymaps/default/keymap.c b/keyboards/handwired/mutepad/keymaps/default/keymap.c
new file mode 100644
index 0000000000..d26e230e53
--- /dev/null
+++ b/keyboards/handwired/mutepad/keymaps/default/keymap.c
@@ -0,0 +1,43 @@
+// Copyright 2022 Joshua Barber (@JoshwJB)
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include QMK_KEYBOARD_H
+
+// Defines names for use in layer keycodes and the keymap
+enum layer_names { _BASE };
+
+enum custom_keycodes { MUTE_GOOGLE_MEET = 0, MUTE_TEAMS = 1 };
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+ switch (keycode) {
+ case MUTE_GOOGLE_MEET:
+ if (record->event.pressed) {
+ tap_code16(G(KC_D));
+ }
+ break;
+ case MUTE_TEAMS:
+ if (record->event.pressed) {
+ tap_code16(C(S(KC_M)));
+ }
+ break;
+ }
+
+ return true;
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ /* Base */
+ [_BASE] = LAYOUT(MUTE_TEAMS, KC_F23, KC_F24, KC_MPLY)};
+
+#ifdef ENCODER_ENABLE
+
+bool encoder_update_user(uint8_t index, bool clockwise) {
+ if (clockwise) {
+ tap_code(KC_VOLU);
+ } else {
+ tap_code(KC_VOLD);
+ }
+ return true;
+}
+
+#endif
diff --git a/keyboards/handwired/mutepad/keymaps/default/readme.md b/keyboards/handwired/mutepad/keymaps/default/readme.md
new file mode 100644
index 0000000000..c3c9ec6aec
--- /dev/null
+++ b/keyboards/handwired/mutepad/keymaps/default/readme.md
@@ -0,0 +1 @@
+# The default keymap for MutePad
diff --git a/keyboards/handwired/mutepad/mutepad.c b/keyboards/handwired/mutepad/mutepad.c
new file mode 100644
index 0000000000..09210c3f4f
--- /dev/null
+++ b/keyboards/handwired/mutepad/mutepad.c
@@ -0,0 +1,4 @@
+// Copyright 2022 JoshwJB (@JoshwJB)
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include "mutepad.h"
diff --git a/keyboards/handwired/mutepad/mutepad.h b/keyboards/handwired/mutepad/mutepad.h
new file mode 100644
index 0000000000..57c317cb60
--- /dev/null
+++ b/keyboards/handwired/mutepad/mutepad.h
@@ -0,0 +1,19 @@
+// Copyright 2022 JoshwJB (@JoshwJB)
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#pragma once
+
+#include "quantum.h"
+
+/* This is a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+#define LAYOUT(K00, K01, K02, K03) \
+ { \
+ { K00, K01, K02, K03 } \
+ }
diff --git a/keyboards/handwired/mutepad/readme.md b/keyboards/handwired/mutepad/readme.md
new file mode 100644
index 0000000000..cbd1c9f316
--- /dev/null
+++ b/keyboards/handwired/mutepad/readme.md
@@ -0,0 +1,33 @@
+# MutePad
+
+[MutePad Repo](https://github.com/JoshwJB/MutePad)
+
+A 3D printed under desk mounted keypad with rotary encoder, for muting applications (discord, zoom etc.) and adjusting volume.
+
+* Keyboard Maintainer: [JoshwJB](https://github.com/JoshwJB)
+* Hardware Supported: ProMicro
+* Hardware Availability: Handwired - see [MutePad Repo](https://github.com/JoshwJB/MutePad)
+
+Make example for this keyboard (after setting up your build environment):
+
+ make handwired/mutepad:default
+
+Flashing example for this keyboard:
+
+ make handwired/mutepad:default:flash
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+
+## Bootloader
+
+Enter the bootloader in 2 ways:
+
+* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
+* **Physical reset button**: Briefly short the ground and reset on the ProMicro
+
+## Images
+![image](https://user-images.githubusercontent.com/15612025/157335123-a76ce059-86b4-4484-9bb2-0abff8a13cc8.png)
+
+### Wiring
+![image](https://user-images.githubusercontent.com/15612025/157336673-ad348e3d-4314-4703-afe0-a43a6f73b892.png)
+![image](https://user-images.githubusercontent.com/15612025/157335150-8491553f-a7dc-462a-a6af-bc4be223b703.png)
diff --git a/keyboards/handwired/mutepad/rules.mk b/keyboards/handwired/mutepad/rules.mk
new file mode 100644
index 0000000000..1a63bd74b1
--- /dev/null
+++ b/keyboards/handwired/mutepad/rules.mk
@@ -0,0 +1,19 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+BOOTLOADER = caterina
+
+# Build Options
+# change yes to no to disable
+#
+BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite
+MOUSEKEY_ENABLE = yes # Mouse keys
+EXTRAKEY_ENABLE = yes # Audio control and System control
+CONSOLE_ENABLE = no # Console for debug
+COMMAND_ENABLE = no # Commands for debug and configuration
+NKRO_ENABLE = yes # Enable N-Key Rollover
+BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
+AUDIO_ENABLE = no # Audio output
+ENCODER_ENABLE = yes