diff options
Diffstat (limited to 'keyboards/handwired/macroboard/config.h')
| -rw-r--r-- | keyboards/handwired/macroboard/config.h | 78 |
1 files changed, 10 insertions, 68 deletions
diff --git a/keyboards/handwired/macroboard/config.h b/keyboards/handwired/macroboard/config.h index fa49ae4e6f..42a4deb5d8 100644 --- a/keyboards/handwired/macroboard/config.h +++ b/keyboards/handwired/macroboard/config.h @@ -21,7 +21,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* USB Device descriptor parameter */ #define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x6465 +#define PRODUCT_ID 0x2137 #define DEVICE_VER 0x0001 #define MANUFACTURER QMK @@ -39,35 +39,26 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) * */ -#define MATRIX_ROW_PINS { A15, B3, B4, B5, B7 } -#define MATRIX_COL_PINS { B12, B13, B14, B15, A8, A10 } #define UNUSED_PINS #define DIODE_DIRECTION COL2ROW -/* - * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. - */ -//#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 - -//#define LED_NUM_LOCK_PIN B0 -//#define LED_CAPS_LOCK_PIN B1 -//#define LED_SCROLL_LOCK_PIN B2 -//#define LED_COMPOSE_PIN B3 -//#define LED_KANA_PIN B4 - -//#define BACKLIGHT_PIN B7 -//#define BACKLIGHT_LEVELS 3 -// #define BACKLIGHT_BREATHING - #define RGB_DI_PIN B9 +#define WS2812_PWM_DRIVER PWMD4 +#define WS2812_PWM_CHANNEL 4 +#define WS2812_PWM_PAL_MODE 2 +#define WS2812_DMA_STREAM STM32_DMA1_STREAM6 // DMA Stream for TIMx_UP, see the respective reference manual for the appropriate values for your MCU. +#define WS2812_DMA_CHANNEL 2 // DMA Channel for TIMx_UP, see the respective reference manual for the appropriate values for your MCU. +#define WS2812_PWM_TARGET_PERIOD 800000 +#define RGBLIGHT_LED_MAP { 0, 2, 4, 6, 8, 10, 12, 14, 16, 18, 20, 22, 23, 21, 19, 17, 15, 13, 11, 9, 7, 5, 3, 1 } + #ifdef RGB_DI_PIN # define RGBLED_NUM 24 # define RGBLIGHT_HUE_STEP 8 # define RGBLIGHT_SAT_STEP 8 # define RGBLIGHT_VAL_STEP 8 # define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ -//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ +# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ # define RGBLIGHT_EFFECT_BREATHING # define RGBLIGHT_EFFECT_RAINBOW_MOOD # define RGBLIGHT_EFFECT_RAINBOW_SWIRL @@ -82,56 +73,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ #define DEBOUNCE 5 -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE - -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is useful for the Windows task manager shortcut (ctrl+shift+esc). - */ -//#define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -//#define NO_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT - -/* Bootmagic Lite key configuration */ -//#define BOOTMAGIC_LITE_ROW 0 -//#define BOOTMAGIC_LITE_COLUMN 0 |