diff options
Diffstat (limited to 'keyboards/handwired/juliet')
-rw-r--r-- | keyboards/handwired/juliet/config.h | 59 | ||||
-rw-r--r-- | keyboards/handwired/juliet/info.json | 2 | ||||
-rw-r--r-- | keyboards/handwired/juliet/rules.mk | 6 |
3 files changed, 2 insertions, 65 deletions
diff --git a/keyboards/handwired/juliet/config.h b/keyboards/handwired/juliet/config.h index 3dbf0ae715..960af55388 100644 --- a/keyboards/handwired/juliet/config.h +++ b/keyboards/handwired/juliet/config.h @@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" /* key matrix size */ #define MATRIX_ROWS 4 @@ -42,64 +41,11 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* COL2ROW, ROW2COL*/ #define DIODE_DIRECTION COL2ROW -/* - * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. - */ -// #define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 - -// #define BACKLIGHT_PIN B7 -// #define BACKLIGHT_BREATHING -// #define BACKLIGHT_LEVELS 3 - -// #define RGB_DI_PIN E2 -// #ifdef RGB_DI_PIN -// #define RGBLED_NUM 16 -// #define RGBLIGHT_HUE_STEP 8 -// #define RGBLIGHT_SAT_STEP 8 -// #define RGBLIGHT_VAL_STEP 8 -// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ -// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ -// #endif - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is userful for the Windows task manager shortcut (ctrl+shift+esc). - */ -// #define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. @@ -115,8 +61,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define NO_ACTION_LAYER //#define NO_ACTION_TAPPING //#define NO_ACTION_ONESHOT - -/* Bootmagic Lite key configuration -#define BOOTMAGIC_LITE_ROW 0 -#define BOOTMAGIC_LITE_COLUMN 0 -*/ diff --git a/keyboards/handwired/juliet/info.json b/keyboards/handwired/juliet/info.json index 053b662e4d..0fc7f4726f 100644 --- a/keyboards/handwired/juliet/info.json +++ b/keyboards/handwired/juliet/info.json @@ -8,6 +8,8 @@ "pid": "0x4069", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "caterina", "layouts": { "LAYOUT_all": { "layout": [{"label":"1.5u", "x":0, "y":0, "w":1.5}, {"x":1.5, "y":0}, {"x":2.5, "y":0}, {"x":3.5, "y":0}, {"x":4.5, "y":0}, {"x":5.5, "y":0}, {"x":6.5, "y":0}, {"x":7.5, "y":0}, {"x":8.5, "y":0}, {"x":9.5, "y":0}, {"x":10.5, "y":0}, {"label":"1.5u", "x":11.5, "y":0, "w":1.5}, {"label":"1.75u", "x":0, "y":1, "w":1.75}, {"x":1.75, "y":1}, {"x":2.75, "y":1}, {"x":3.75, "y":1}, {"x":4.75, "y":1}, {"x":5.75, "y":1}, {"x":6.75, "y":1}, {"x":7.75, "y":1}, {"x":8.75, "y":1}, {"x":9.75, "y":1}, {"label":"2.25u", "x":10.75, "y":1, "w":2.25}, {"label":"1.25u", "x":0, "y":2, "w":1.25}, {"x":1.25, "y":2}, {"x":2.25, "y":2}, {"x":3.25, "y":2}, {"x":4.25, "y":2}, {"x":5.25, "y":2}, {"x":6.25, "y":2}, {"x":7.25, "y":2}, {"x":8.25, "y":2}, {"x":9.25, "y":2}, {"x":10.25, "y":2}, {"label":"1.75u", "x":11.25, "y":2, "w":1.75}, {"label":"1.25u", "x":0, "y":3, "w":1.25}, {"label":"1u", "x":1.25, "y":3}, {"label":"1.25u", "x":2.25, "y":3, "w":1.25}, {"label":"2.25u", "x":3.5, "y":3, "w":2.25}, {"label":"1u", "x":5.75, "y":3}, {"label":"2.75u", "x":6.75, "y":3, "w":2.75}, {"label":"1.25u", "x":9.5, "y":3, "w":1.25}, {"label":"1u", "x":10.75, "y":3}, {"label":"1.25u", "x":11.75, "y":3, "w":1.25}] diff --git a/keyboards/handwired/juliet/rules.mk b/keyboards/handwired/juliet/rules.mk index 35dd707645..fa6fbf34d9 100644 --- a/keyboards/handwired/juliet/rules.mk +++ b/keyboards/handwired/juliet/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = caterina - # Build Options # change yes to no to disable # |