3 files changed, 2 insertions, 55 deletions
diff --git a/keyboards/handwired/juliet/config.h b/keyboards/handwired/juliet/config.h
index 3dbf0ae715..91eeac9ce7 100644
--- a/keyboards/handwired/juliet/config.h
+++ b/keyboards/handwired/juliet/config.h
@@ -17,7 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#include "config_common.h"
 
 /* key matrix size */
 #define MATRIX_ROWS 4
@@ -42,15 +41,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* COL2ROW, ROW2COL*/
 #define DIODE_DIRECTION COL2ROW
 
-/*
- * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
- */
-// #define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
-
-// #define BACKLIGHT_PIN B7
-// #define BACKLIGHT_BREATHING
-// #define BACKLIGHT_LEVELS 3
-
 // #define RGB_DI_PIN E2
 // #ifdef RGB_DI_PIN
 //   #define RGBLED_NUM 16
@@ -61,45 +51,11 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //   #define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
 // #endif
 
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
-/* number of backlight levels */
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-// #define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
 /*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
@@ -115,8 +71,3 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define NO_ACTION_LAYER
 //#define NO_ACTION_TAPPING
 //#define NO_ACTION_ONESHOT
-
-/* Bootmagic Lite key configuration
-#define BOOTMAGIC_LITE_ROW 0
-#define BOOTMAGIC_LITE_COLUMN 0
-*/
diff --git a/keyboards/handwired/juliet/info.json b/keyboards/handwired/juliet/info.json
index 053b662e4d..0fc7f4726f 100644
--- a/keyboards/handwired/juliet/info.json
+++ b/keyboards/handwired/juliet/info.json
@@ -8,6 +8,8 @@
          "pid": "0x4069",
          "device_version": "0.0.1"
      },
+    "processor": "atmega32u4",
+    "bootloader": "caterina",
     "layouts": {
         "LAYOUT_all": {
             "layout": [{"label":"1.5u", "x":0, "y":0, "w":1.5}, {"x":1.5, "y":0}, {"x":2.5, "y":0}, {"x":3.5, "y":0}, {"x":4.5, "y":0}, {"x":5.5, "y":0}, {"x":6.5, "y":0}, {"x":7.5, "y":0}, {"x":8.5, "y":0}, {"x":9.5, "y":0}, {"x":10.5, "y":0}, {"label":"1.5u", "x":11.5, "y":0, "w":1.5}, {"label":"1.75u", "x":0, "y":1, "w":1.75}, {"x":1.75, "y":1}, {"x":2.75, "y":1}, {"x":3.75, "y":1}, {"x":4.75, "y":1}, {"x":5.75, "y":1}, {"x":6.75, "y":1}, {"x":7.75, "y":1}, {"x":8.75, "y":1}, {"x":9.75, "y":1}, {"label":"2.25u", "x":10.75, "y":1, "w":2.25}, {"label":"1.25u", "x":0, "y":2, "w":1.25}, {"x":1.25, "y":2}, {"x":2.25, "y":2}, {"x":3.25, "y":2}, {"x":4.25, "y":2}, {"x":5.25, "y":2}, {"x":6.25, "y":2}, {"x":7.25, "y":2}, {"x":8.25, "y":2}, {"x":9.25, "y":2}, {"x":10.25, "y":2}, {"label":"1.75u", "x":11.25, "y":2, "w":1.75}, {"label":"1.25u", "x":0, "y":3, "w":1.25}, {"label":"1u", "x":1.25, "y":3}, {"label":"1.25u", "x":2.25, "y":3, "w":1.25}, {"label":"2.25u", "x":3.5, "y":3, "w":2.25}, {"label":"1u", "x":5.75, "y":3}, {"label":"2.75u", "x":6.75, "y":3, "w":2.75}, {"label":"1.25u", "x":9.5, "y":3, "w":1.25}, {"label":"1u", "x":10.75, "y":3}, {"label":"1.25u", "x":11.75, "y":3, "w":1.25}]
diff --git a/keyboards/handwired/juliet/rules.mk b/keyboards/handwired/juliet/rules.mk
index 35dd707645..fa6fbf34d9 100644
--- a/keyboards/handwired/juliet/rules.mk
+++ b/keyboards/handwired/juliet/rules.mk
@@ -1,9 +1,3 @@
-# MCU name
-MCU = atmega32u4
-
-# Bootloader selection
-BOOTLOADER = caterina
-
 # Build Options
 #   change yes to no to disable
 #