3 files changed, 2 insertions, 62 deletions
diff --git a/keyboards/handwired/hacked_motospeed/config.h b/keyboards/handwired/hacked_motospeed/config.h
index 4ad84b0677..e5c60800af 100644
--- a/keyboards/handwired/hacked_motospeed/config.h
+++ b/keyboards/handwired/hacked_motospeed/config.h
@@ -17,11 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#include "config_common.h"
-
-/* key matrix size */
-#define MATRIX_ROWS 10
-#define MATRIX_COLS 12
 
 /*
  * Keyboard Matrix Assignments
@@ -43,63 +38,16 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* COL2ROW, ROW2COL*/
 #define DIODE_DIRECTION COL2ROW
 
-/*
- * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
- */
-//#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
-
 #define BACKLIGHT_PIN B7
-// #define BACKLIGHT_BREATHING
-#define BACKLIGHT_LEVELS 3
-
-// #define RGB_DI_PIN E2
-// #ifdef RGB_DI_PIN
-//   #define RGBLED_NUM 16
-//   #define RGBLIGHT_HUE_STEP 8
-//   #define RGBLIGHT_SAT_STEP 8
-//   #define RGBLIGHT_VAL_STEP 8
-//   #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-//   #define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-// #endif
-
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
 
 /* define if matrix has ghost (lacks anti-ghosting diodes) */
 #define MATRIX_HAS_GHOST
 
-/* number of backlight levels */
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-// #define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-
 /*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
@@ -115,7 +63,3 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define NO_ACTION_LAYER
 //#define NO_ACTION_TAPPING
 //#define NO_ACTION_ONESHOT
-
-/* Bootmagic Lite key configuration */
-// #define BOOTMAGIC_LITE_ROW 0
-// #define BOOTMAGIC_LITE_COLUMN 0
diff --git a/keyboards/handwired/hacked_motospeed/info.json b/keyboards/handwired/hacked_motospeed/info.json
index a0fcd930c3..e0c8c42566 100644
--- a/keyboards/handwired/hacked_motospeed/info.json
+++ b/keyboards/handwired/hacked_motospeed/info.json
@@ -8,6 +8,8 @@
     "pid": "0x0690",
     "device_version": "0.0.1"
   },
+  "processor": "at90usb1286",
+  "bootloader": "halfkay",
   "layouts": {
     "LAYOUT": {
       "layout": [{"label":"ESC", "x":0, "y":0, "h":2}, {"label":"Q", "x":1, "y":0}, {"label":"W", "x":2, "y":0}, {"label":"E", "x":3, "y":0}, {"label":"R", "x":4, "y":0}, {"label":"T", "x":5, "y":0}, {"label":"Z", "x":7, "y":0}, {"label":"U", "x":8, "y":0}, {"label":"I", "x":9, "y":0}, {"label":"O", "x":10, "y":0}, {"label":"P", "x":11, "y":0, "w":2}, {"label":"A", "x":1, "y":1}, {"label":"S", "x":2, "y":1}, {"label":"D", "x":3, "y":1}, {"label":"F", "x":4, "y":1}, {"label":"G", "x":5, "y":1}, {"label":"H", "x":7, "y":1}, {"label":"J", "x":8, "y":1}, {"label":"K", "x":9, "y":1}, {"label":"L", "x":10, "y":1}, {"label":"(", "x":11, "y":1}, {"label":")", "x":12, "y":1}, {"label":"=", "x":0, "y":2}, {"label":"Y", "x":1, "y":2}, {"label":"X", "x":2, "y":2}, {"label":"C", "x":3, "y":2}, {"label":"V", "x":4, "y":2}, {"label":"B", "x":5, "y":2}, {"label":"N", "x":7, "y":2}, {"label":"M", "x":8, "y":2}, {"label":",", "x":9, "y":2}, {"label":".", "x":10, "y":2}, {"label":"?", "x":11, "y":2}, {"label":"Fn", "x":0, "y":3, "w":2}, {"label":"Num", "x":2, "y":3}, {"label":"Bksp", "x":3, "y":3}, {"label":"Enter", "x":4, "y":3}, {"label":"Spc", "x":5, "y":3}, {"label":"LShift", "x":7, "y":3}, {"label":"LCtrl", "x":8, "y":3}, {"label":"LAlt", "x":9, "y":3}, {"label":"RAlt", "x":10, "y":3}, {"label":"Meta", "x":11, "y":3}, {"label":"Fn", "x":12, "y":2, "h":2}]
diff --git a/keyboards/handwired/hacked_motospeed/rules.mk b/keyboards/handwired/hacked_motospeed/rules.mk
index 2dbbeb1188..50716e356f 100644
--- a/keyboards/handwired/hacked_motospeed/rules.mk
+++ b/keyboards/handwired/hacked_motospeed/rules.mk
@@ -1,9 +1,3 @@
-# MCU name
-MCU = at90usb1286
-
-# Bootloader selection
-BOOTLOADER = halfkay
-
 # Build Options
 #   change yes to no to disable
 #