summaryrefslogtreecommitdiffstats
path: root/keyboards/handwired/floorboard
diff options
context:
space:
mode:
Diffstat (limited to 'keyboards/handwired/floorboard')
-rw-r--r--keyboards/handwired/floorboard/config.h46
-rw-r--r--keyboards/handwired/floorboard/info.json4
-rw-r--r--keyboards/handwired/floorboard/rules.mk9
3 files changed, 4 insertions, 55 deletions
diff --git a/keyboards/handwired/floorboard/config.h b/keyboards/handwired/floorboard/config.h
index 70362f0f24..ef608af83c 100644
--- a/keyboards/handwired/floorboard/config.h
+++ b/keyboards/handwired/floorboard/config.h
@@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-#include "config_common.h"
/* key matrix size */
#define MATRIX_ROWS 4
@@ -39,15 +38,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
/* COL2ROW, ROW2COL*/
#define DIODE_DIRECTION COL2ROW
-/*
- * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
- */
-// #define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
-
-// #define BACKLIGHT_PIN B7
-// #define BACKLIGHT_BREATHING
-// #define BACKLIGHT_LEVELS 3
-
// #define RGB_DI_PIN E2
// #ifdef RGB_DI_PIN
// #define RGBLED_NUM 16
@@ -64,43 +54,11 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
// #endif
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-// #define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
/*
* Feature disable options
* These options are also useful to firmware size reduction.
@@ -116,7 +74,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
-
-/* Bootmagic Lite key configuration */
-// #define BOOTMAGIC_LITE_ROW 0
-// #define BOOTMAGIC_LITE_COLUMN 0
diff --git a/keyboards/handwired/floorboard/info.json b/keyboards/handwired/floorboard/info.json
index 2dcc40d1af..226041e40d 100644
--- a/keyboards/handwired/floorboard/info.json
+++ b/keyboards/handwired/floorboard/info.json
@@ -8,6 +8,10 @@
"pid": "0x0000",
"device_version": "0.0.1"
},
+ "processor": "STM32F303",
+ "bootloader": "stm32-dfu",
+ "board": "QMK_PROTON_C",
+ "community_layouts": ["ortho_4x12"],
"layouts": {
"LAYOUT_ortho_4x12": {
"layout": [
diff --git a/keyboards/handwired/floorboard/rules.mk b/keyboards/handwired/floorboard/rules.mk
index f8ef7da37a..fce764c22d 100644
--- a/keyboards/handwired/floorboard/rules.mk
+++ b/keyboards/handwired/floorboard/rules.mk
@@ -1,10 +1,3 @@
-# MCU name
-MCU = STM32F303
-BOARD = QMK_PROTON_C
-
-# Bootloader selection
-BOOTLOADER = stm32-dfu
-
# Build Options
# change yes to no to disable
#
@@ -17,5 +10,3 @@ NKRO_ENABLE = no # Enable N-Key Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
AUDIO_ENABLE = no # Audio output
-
-LAYOUTS = ortho_4x12