diff options
Diffstat (limited to 'keyboards/handwired/evk/v1_3')
| -rw-r--r-- | keyboards/handwired/evk/v1_3/config.h | 126 | ||||
| -rw-r--r-- | keyboards/handwired/evk/v1_3/keymaps/default/keymap.c | 35 |
2 files changed, 161 insertions, 0 deletions
diff --git a/keyboards/handwired/evk/v1_3/config.h b/keyboards/handwired/evk/v1_3/config.h new file mode 100644 index 0000000000..e8e3ecb704 --- /dev/null +++ b/keyboards/handwired/evk/v1_3/config.h @@ -0,0 +1,126 @@ +/* +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#pragma once + +#include "config_common.h" + +/* key matrix size */ +#define MATRIX_ROWS 6 +#define MATRIX_COLS 16 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * + */ +#define MATRIX_ROW_PINS \ + { B0, B1, B2, B3, B7, D0 } +#define MATRIX_COL_PINS \ + { D1, D2, D3, C6, C7, F0, F1, F4, F5, F6, F7, B6, B5, B4, D7, D6 } + +/* COL2ROW, ROW2COL*/ +#define DIODE_DIRECTION ROW2COL // the positive current flows into the rows and then out of the columns negative. + +/* define whiche Pins to use for the status LEDs*/ +#define LED_CAPS_LOCK_PIN D4 + + +/* + * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. + */ +// #define SOFT_SERIAL_PIN D2 // or D1, D2, D3, E6 + +// #define BACKLIGHT_PIN B7 +// #define BACKLIGHT_BREATHING +// #define BACKLIGHT_LEVELS 3 + +// #define RGB_DI_PIN E2 +// #ifdef RGB_DI_PIN +// #define RGBLED_NUM 16 +// #define RGBLIGHT_HUE_STEP 8 +// #define RGBLIGHT_SAT_STEP 8 +// #define RGBLIGHT_VAL_STEP 8 +// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ +// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ +// /*== customize breathing effect ==*/ +// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/ +// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64 +// /*==== use exp() and sin() ====*/ +// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7 +// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 +// #endif + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. + * This is userful for the Windows task manager shortcut (ctrl+shift+esc). + */ +// #define GRAVE_ESC_CTRL_OVERRIDE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT + +/* Bootmagic Lite key configuration */ +// #define BOOTMAGIC_LITE_ROW 0 +// #define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/handwired/evk/v1_3/keymaps/default/keymap.c b/keyboards/handwired/evk/v1_3/keymaps/default/keymap.c new file mode 100644 index 0000000000..01bf217c61 --- /dev/null +++ b/keyboards/handwired/evk/v1_3/keymaps/default/keymap.c @@ -0,0 +1,35 @@ +/* +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT(/* Base Layer (0th Layer) - default Layout */ + KC_1, KC_2, KC_3, KC_4, KC_5, KC_ESC, TG(1), KC_PSCR, KC_INS, KC_APP, KC_CAPS, KC_6, KC_7, KC_8, KC_9, KC_0, + KC_Q, KC_H, KC_R, KC_F, KC_X, KC_PGUP, KC_F1, KC_F2, KC_F3, KC_F4, KC_PGDN, KC_QUOT, KC_Y, KC_O, KC_U, KC_J, + KC_L, KC_S, KC_N, KC_T, KC_D, KC_LBRC, KC_F5, KC_F6, KC_F7, KC_F8, KC_RBRC, KC_P, KC_I, KC_A, KC_E, KC_K, + KC_Z, KC_M, KC_C, KC_V, KC_B, KC_F9, KC_F10, KC_F11, KC_F12, KC_W, KC_G, KC_COMM, KC_DOT, KC_ENT, + KC_LALT, KC_MINS, KC_EQL, KC_END, KC_GRV, KC_LCTL, KC_HOME, KC_UP, KC_END, KC_PGUP, KC_RCTL, KC_BSLS, KC_TAB, KC_SCLN, KC_SLSH, KC_RALT, + KC_LSFT, KC_DEL, KC_SPC, KC_LGUI, KC_LEFT, KC_DOWN, KC_RGHT, KC_PGDN, KC_RGUI, KC_SPC, KC_BSPC, KC_RSFT + ), + [1] = LAYOUT(/* 1st Layer - Numpad Keys */ + _______, _______, _______, _______, _______, _______, _______, KC_SCRL, KC_PAUS, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, KC_PSLS, KC_PAST, KC_PMNS, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, KC_P7, KC_P8, KC_P9, KC_PPLS, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, KC_P4, KC_P5, KC_P6, KC_PPLS, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, KC_P1, KC_P2, KC_P3, KC_PEQL, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, KC_P0, KC_P0, KC_PDOT, KC_PENT, _______, _______, _______, _______ + ) +}; + |