diff options
Diffstat (limited to 'keyboards/handwired/evk/v1_3/config.h')
| -rw-r--r-- | keyboards/handwired/evk/v1_3/config.h | 70 |
1 files changed, 0 insertions, 70 deletions
diff --git a/keyboards/handwired/evk/v1_3/config.h b/keyboards/handwired/evk/v1_3/config.h index e8e3ecb704..a43abb351a 100644 --- a/keyboards/handwired/evk/v1_3/config.h +++ b/keyboards/handwired/evk/v1_3/config.h @@ -15,11 +15,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 6 -#define MATRIX_COLS 16 /* * Keyboard Matrix Assignments @@ -39,72 +34,11 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* COL2ROW, ROW2COL*/ #define DIODE_DIRECTION ROW2COL // the positive current flows into the rows and then out of the columns negative. -/* define whiche Pins to use for the status LEDs*/ -#define LED_CAPS_LOCK_PIN D4 - - -/* - * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. - */ -// #define SOFT_SERIAL_PIN D2 // or D1, D2, D3, E6 - -// #define BACKLIGHT_PIN B7 -// #define BACKLIGHT_BREATHING -// #define BACKLIGHT_LEVELS 3 - -// #define RGB_DI_PIN E2 -// #ifdef RGB_DI_PIN -// #define RGBLED_NUM 16 -// #define RGBLIGHT_HUE_STEP 8 -// #define RGBLIGHT_SAT_STEP 8 -// #define RGBLIGHT_VAL_STEP 8 -// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ -// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ -// /*== customize breathing effect ==*/ -// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/ -// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64 -// /*==== use exp() and sin() ====*/ -// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7 -// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 -// #endif - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is userful for the Windows task manager shortcut (ctrl+shift+esc). - */ -// #define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. @@ -120,7 +54,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define NO_ACTION_LAYER //#define NO_ACTION_TAPPING //#define NO_ACTION_ONESHOT - -/* Bootmagic Lite key configuration */ -// #define BOOTMAGIC_LITE_ROW 0 -// #define BOOTMAGIC_LITE_COLUMN 0 |