1 files changed, 0 insertions, 101 deletions
diff --git a/keyboards/handwired/dygma/raise/leds.c b/keyboards/handwired/dygma/raise/leds.c
deleted file mode 100644
index 3f6037cbfa..0000000000
--- a/keyboards/handwired/dygma/raise/leds.c
+++ /dev/null
@@ -1,101 +0,0 @@
-/* Copyright 2018-2021 James Laird-Wah, Islam Sharabash
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include "quantum.h"
-#include "i2c_master.h"
-#include "led_tables.h"
-#include "rgb_matrix.h"
-#include <string.h>
-#include "raise.h"
-#include "wire-protocol-constants.h"
-#include "print.h"
-#include "leds.h"
-
-struct __attribute__((packed)) cRGB {
-    uint8_t r;
-    uint8_t g;
-    uint8_t b;
-};
-
-#define LEDS_PER_HAND 72
-#define LED_BANKS 9
-#define LEDS_PER_BANK 8
-#define LED_BYTES_PER_BANK (sizeof(cRGB) * LEDS_PER_BANK)
-
-// shifting << 1 is because drivers/chibios/i2c_master.h expects the address
-// shifted.
-// 0x58 and 0x59 are the addresses defined in dygma/raise/Hand.h
-#define I2C_ADDR_LEFT (0x58 << 1)
-#define I2C_ADDR_RIGHT (0x59 << 1)
-#define I2C_ADDR(hand) ((hand) ? I2C_ADDR_RIGHT : I2C_ADDR_LEFT)
-#define LEFT 0
-#define RIGHT 1
-
-static cRGB led_state[2 * LEDS_PER_HAND];
-
-void set_all_leds_to(uint8_t r, uint8_t g, uint8_t b) {
-    uint8_t buf[] = {TWI_CMD_LED_SET_ALL_TO, b, g, r};
-    i2c_transmit(I2C_ADDR(LEFT), buf, sizeof(buf), I2C_TIMEOUT);
-    wait_us(10);
-    i2c_transmit(I2C_ADDR(RIGHT), buf, sizeof(buf), I2C_TIMEOUT);
-    wait_us(10);
-}
-
-void set_led_to(int led, uint8_t r, uint8_t g, uint8_t b) {
-    int     sled  = led_map[led];
-    uint8_t buf[] = {TWI_CMD_LED_SET_ONE_TO, sled & 0x1f, b, g, r};
-    int     hand  = (sled >= LEDS_PER_HAND) ? RIGHT : LEFT;
-    i2c_transmit(I2C_ADDR(hand), buf, sizeof(buf), I2C_TIMEOUT);
-    wait_us(10);
-}
-
-static void set_color(int index, uint8_t r, uint8_t g, uint8_t b) {
-    int sled = led_map[index];
-
-    led_state[sled].r = r;
-    led_state[sled].g = g;
-    led_state[sled].b = b;
-}
-
-static void set_color_all(uint8_t r, uint8_t g, uint8_t b) {
-    for (int i = 0; i < DRIVER_LED_TOTAL; i++) set_color(i, r, g, b);
-}
-
-static void init(void) {}
-
-static void flush(void) {
-    uint8_t  command[1 + LED_BYTES_PER_BANK];
-
-    // SUBTLE(ibash) alternate hands when transmitting led data, otherwise the
-    // mcu in the hand seems to have trouble keeping up with the i2c
-    // transmission
-    for (int bank = 0; bank < LED_BANKS; bank++) {
-        for (int hand = 0; hand < 2; hand++) {
-            int addr = I2C_ADDR(hand);
-            int i = (hand * LEDS_PER_HAND) + (bank * LEDS_PER_BANK);
-            uint8_t *bank_data = (uint8_t *)&led_state[i];
-
-            command[0] = TWI_CMD_LED_BASE + bank;
-            memcpy(&command[1], bank_data, LED_BYTES_PER_BANK);
-            i2c_transmit(addr, command, sizeof(command), I2C_TIMEOUT);
-
-            // delay to prevent issues with the i2c bus
-            wait_us(10);
-        }
-    }
-}
-
-const rgb_matrix_driver_t rgb_matrix_driver = {.init = init, .flush = flush, .set_color = set_color, .set_color_all = set_color_all};