diff options
Diffstat (limited to 'keyboards/hadron/ver2/keymaps/side_numpad')
4 files changed, 520 insertions, 0 deletions
diff --git a/keyboards/hadron/ver2/keymaps/side_numpad/config.h b/keyboards/hadron/ver2/keymaps/side_numpad/config.h new file mode 100644 index 0000000000..409279a95f --- /dev/null +++ b/keyboards/hadron/ver2/keymaps/side_numpad/config.h @@ -0,0 +1,8 @@ +#pragma once + +#define DEFAULT_LAYER_SONGS { SONG(QWERTY_SOUND)\ + } + +#define LEADER_TIMEOUT 300 +//#define BACKLIGHT_BREATHING + diff --git a/keyboards/hadron/ver2/keymaps/side_numpad/keymap.c b/keyboards/hadron/ver2/keymaps/side_numpad/keymap.c new file mode 100644 index 0000000000..248bb7ca66 --- /dev/null +++ b/keyboards/hadron/ver2/keymaps/side_numpad/keymap.c @@ -0,0 +1,484 @@ +#include QMK_KEYBOARD_H +#include "LUFA/Drivers/Peripheral/TWI.h" +#ifdef AUDIO_ENABLE + #include "audio.h" +#endif +#ifdef USE_I2C +#include "i2c.h" +#endif +#ifdef SSD1306OLED +#include "ssd1306.h" +#endif +extern keymap_config_t keymap_config; + +//Following line allows macro to read current RGB settings +extern rgblight_config_t rgblight_config; + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _QWERTY 0 +#define _LOWER 3 +#define _RAISE 4 +#define _FNLAYER 6 +#define _NUMLAY 7 +#define _MOUSECURSOR 8 +#define _ADJUST 16 + +enum preonic_keycodes { + QWERTY = SAFE_RANGE, + COLEMAK, + DVORAK, + LOWER, + RAISE, + BACKLIT, + RGBLED_TOGGLE, + RGBLED_STEP_MODE, + RGBLED_INCREASE_HUE, + RGBLED_DECREASE_HUE, + RGBLED_INCREASE_SAT, + RGBLED_DECREASE_SAT, + RGBLED_INCREASE_VAL, + RGBLED_DECREASE_VAL, +}; + +enum macro_keycodes { + KC_DEMOMACRO, +}; + +// Fillers to make layering more clear +#define _______ KC_TRNS +#define XXXXXXX KC_NO +// Custom macros +#define CTL_ESC CTL_T(KC_ESC) // Tap for Esc, hold for Ctrl +#define CTL_TTAB CTL_T(KC_TAB) // Tap for Esc, hold for Ctrl +#define CTL_ENT CTL_T(KC_ENT) // Tap for Enter, hold for Ctrl +#define SFT_ENT SFT_T(KC_ENT) // Tap for Enter, hold for Shift +// Requires KC_TRNS/_______ for the trigger key in the destination layer +#define LT_FN(kc) LT(_FNLAYER, kc) // L-ayer T-ap Function Layer +#define LT_MC(kc) LT(_MOUSECURSOR, kc) // L-ayer T-ap M-ouse C-ursor +#define LT_RAI(kc) LT(_RAISE, kc) // L-ayer T-ap to Raise +#define TG_NUMLAY TG(_NUMLAY) //Toggle for layer _NUMLAY +#define DEMOMACRO M(KC_DEMOMACRO) // My login macros + + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +/* Qwerty + * ,------+------+------+------+------+------------------------------------------------. + * | Esc | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | + * |------+------+------+------+------+------+------+------+------+------+------+------+--------------------. + * | Tab | Q | W | E | R | T | Y | U | I | O | P | Bksp | 7 | 8 | 9 | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | CAPS | A | S | D | F | G | H | J | K | L | ; |Enter | 4 | 5 | 6 | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | Shift| Z | X | C | V | B | N | M | , | . | / | = | 1 | 2 | 3 | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | ~ | Ctrl | Alt | GUI |Lower |Space |Space |Raise | RAlt | Ins | Del |NumLay| 0 | . | ENT | + * `--------------------------------------------------------------------------------------------------------' + */ +[_QWERTY] = LAYOUT( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS,\ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, KC_P7, KC_P8, KC_P9, \ + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, LT_MC(KC_SCLN), CTL_ENT, KC_P4, KC_P5, KC_P6, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_EQL, KC_P1, KC_P2, KC_P3, \ + KC_GRV, KC_RCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_RALT, KC_INS, KC_DEL, TG_NUMLAY, KC_P0, KC_PDOT, KC_PENT \ +), + +/* Lower + * ,-----------------------------------------------------------------------------------. + * | | | | | | | | | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------+--------------------. + * | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | ~ | \ | | | | + * |------+------+------+------+------+-------------+------+------+------+------+------+------+------+------| + * | CAPS | F1 | F2 | F3 | F4 | F5 | F6 | _ | + | { | } | | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | | F7 | F8 | F9 | F10 | F11 | F12 |ISO ~ |ISO | | [ | ] | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | Next | Vol- | Vol+ | Play | | | | + * `--------------------------------------------------------------------------------------------------------' + */ +[_LOWER] = LAYOUT( + KC_ESC, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \ + KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_GRV, KC_BSLS, _______, _______, _______, \ + KC_CAPS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_EQL, KC_LBRC, KC_RBRC, KC_PIPE, _______, _______, _______, \ + _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, S(KC_NUHS), S(KC_NUBS), KC_LCBR, KC_RCBR, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY, _______, _______, _______\ +), + +/* Raise + * ,-----------------------------------------------------------------------------------. + * | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | + * |------+------+------+------+------+------+------+------+------+------+------+------+--------------------. + * | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | ~ | \ | | | | + * |------+------+------+------+------+-------------+------+------+------+------+------+------+------+------| + * | | A | Up | D | PrSc | | 4 | 5 | 6 | * | : | ' | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | | Lt | Dn | Rt | Mute | | 1 | 2 | 3 | Up | / | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | |Space | 0 | | Left | Down | Right| | | | | + * `--------------------------------------------------------------------------------------------------------' + */ +[_RAISE] = LAYOUT( + KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, \ + KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_PLUS, KC_BSLS, _______, _______, _______, \ + _______, KC_A, KC_UP, KC_D, KC_PSCR, _______, KC_4, KC_5, KC_6, KC_PAST, KC_COLN, KC_QUOT, _______, _______, _______, \ + _______, KC_LEFT, KC_DOWN, KC_RIGHT, KC__MUTE, _______, KC_1, KC_2, KC_3, KC_UP, KC_SLSH, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, KC_SPC, KC_0, _______, KC_LEFT, KC_DOWN, KC_RIGHT, _______, _______, _______, _______ \ +), + +/* FN layer on Esc key + * ,-----------------------------------------------------------------------------------. + * | | | | | | | | | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------+--------------------. + * | | ! | @ | # | $ | % | ^ | & | * | ( | ) | + | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | | F1 | F2 | F3 | F4 | F5 | F6 | _ | = | [ | ] | ' | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | | F7 | F8 | F9 | F10 | F11 | F12 |ISO ~ |ISO | | { | } | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | Next | Vol- | Vol+ | Play | | | | + * `--------------------------------------------------------------------------------------------------------' + */ +[_FNLAYER] = LAYOUT( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,\ + _______, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_PLUS, _______, _______, _______, \ + _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_EQL, KC_LBRC, KC_RBRC, KC_QUOT, _______, _______, _______, \ + _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,S(KC_NUHS), S(KC_NUBS), KC_LCBR, KC_RCBR, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY, _______, _______, _______ \ +), + +/* Num Layer + * ,-----------------------------------------------------------------------------------. + * | | | | | | | | | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------+--------------------. + * | | | | | | | | | | | | | F7 | F8 | F9 | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | | | | F4 | F5 | F6 | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | | | | | Up | | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | | | Exit | Left | Down | Rght | + * `--------------------------------------------------------------------------------------------------------' + */ +[_NUMLAY] = LAYOUT( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,\ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_INS, KC_HOME, KC_PGUP, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL, KC_END, KC_PGDN, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_PMNS, KC_UP, KC_PPLS, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_RIGHT \ +), + +/* Mouse Layer (semi-col) + * ,-----------------------------------------------------------------------------------. + * | |ACCL0| ACCL1| ACCL2 | | | | | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------+--------------------. + * | | | | | | Home | Wh_Up| WHL_L| M_Up | WHL_R| | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | End | Wh_Dn| M_Lft| M_Dn | M_Rt | | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | BTN2 | BTN3 | BTN4 | BTN5 | | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | BTN1 | | | | BTN1 | | | | | | + * `--------------------------------------------------------------------------------------------------------' + */ + +[_MOUSECURSOR] = LAYOUT( + _______, KC_ACL0, KC_ACL1, KC_ACL2, _______, _______, _______, _______, _______, _______, _______, _______,\ + _______, _______, _______, _______, _______, KC_HOME, KC_PGUP, KC_WH_L, KC_MS_U, KC_WH_R, DEMOMACRO, _______, _______, _______, _______, \ + _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_END , KC_PGDN, KC_MS_L, KC_MS_D, KC_MS_R, _______, _______, _______, _______, _______, \ + _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, _______, KC_BTN2, KC_BTN3, KC_BTN4, KC_BTN5, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, KC_BTN1, KC_BTN1, _______, _______, _______, _______, _______, _______, _______, _______ \ +), + +/* Adjust (Lower + Raise) + + * ,-----------------------------------------------------------------------------------. + * | Reset| | | | | | | | | VolD | VolU | Mute | + * |------+------+------+------+------+------+------+------+------+------+------+------+--------------------. + * | |RGB TG|RGB ST|RGBH -|RGBH +|RGBS -|RGBS +|RGBV -|RGBV +| | | Del | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | | | |Aud on|Audoff|AGnorm|AGswap|Qwerty| | | | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | |Voice-|Voice+|Mus on|Musoff|MIDIon|MIDIof| | BL + |BL ST |BLSTEP| BL TG| | | | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | | | | | | | + * `--------------------------------------------------------------------------------------------------------' + */ +[_ADJUST] = LAYOUT( + RESET, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_VOLD, KC_VOLU, KC_MUTE, \ + _______, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, _______, KC_DEL, _______, _______, _______, \ + _______, _______, _______, AU_ON, AU_OFF, AG_NORM, AG_SWAP, QWERTY, _______, _______, _______, _______, _______, _______, _______, \ + _______, MUV_DE, MUV_IN, MU_ON, MU_OFF, MI_ON, MI_OFF, _______, BL_DEC, BL_INC, BL_STEP, BL_TOGG, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \ +) + + + +}; + +// define variables for reactive RGB +bool RGB_INIT = false; +bool TOG_STATUS = false; +bool NUMLAY_STATUS = false; +int RGB_current_mode; + + +void update_tri_layer_RGB(uint8_t layer1, uint8_t layer2, uint8_t layer3) { + if (IS_LAYER_ON(layer1) && IS_LAYER_ON(layer2)) { + rgblight_mode(RGB_current_mode); + layer_on(layer3); + } else { + layer_off(layer3); + } +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case QWERTY: + if (record->event.pressed) { + set_single_persistent_default_layer(_QWERTY); + } + return false; + break; + case LOWER: + if (record->event.pressed) { + //not sure how to have keyboard check mode and set it to a variable, so my work around + //uses another variable that would be set to true after the first time a reactive key is pressed. + if (RGB_INIT) {} else { + RGB_current_mode = rgblight_config.mode; + RGB_INIT = true; + } + if (TOG_STATUS) { //TOG_STATUS checks is another reactive key currently pressed, only changes RGB mode if returns false + } else { + TOG_STATUS = !TOG_STATUS; + rgblight_mode(16); + } + layer_on(_LOWER); + update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST); + } else { + rgblight_mode(RGB_current_mode); // revert RGB to initial mode prior to RGB mode change + TOG_STATUS = false; + layer_off(_LOWER); + update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST); + } + return false; + break; + case RAISE: + if (record->event.pressed) { + //not sure how to have keyboard check mode and set it to a variable, so my work around + //uses another variable that would be set to true after the first time a reactive key is pressed. + if (RGB_INIT) {} else { + RGB_current_mode = rgblight_config.mode; + RGB_INIT = true; + } + if (TOG_STATUS) { //TOG_STATUS checks is another reactive key currently pressed, only changes RGB mode if returns false + } else { + TOG_STATUS = !TOG_STATUS; + rgblight_mode(15); + } + layer_on(_RAISE); + update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST); + } else { + rgblight_mode(RGB_current_mode); // revert RGB to initial mode prior to RGB mode change + layer_off(_RAISE); + TOG_STATUS = false; + update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST); + } + return false; + break; + case BACKLIT: + if (record->event.pressed) { + register_code(KC_RSFT); + #ifdef BACKLIGHT_ENABLE + backlight_step(); + #endif + } else { + unregister_code(KC_RSFT); + } + return false; + break; + //my attempt for RGB layer lock indication via changing the mode, still have to figure out how to not have other keypress not override this mode + case TG_NUMLAY: + if (record->event.pressed) { + if (RGB_INIT) {} else { + RGB_current_mode = rgblight_config.mode; + RGB_INIT = true; + } + NUMLAY_STATUS = !NUMLAY_STATUS; + if (NUMLAY_STATUS) { + rgblight_mode(4); + layer_on(_NUMLAY); + } else { + rgblight_mode(RGB_current_mode); + layer_off(_NUMLAY); } + } + return false; + break; + case RGB_MOD: + //led operations - RGB mode change now updates the RGB_current_mode to allow the right RGB mode to be set after reactive keys are released + if (record->event.pressed) { + rgblight_mode(RGB_current_mode); + rgblight_step(); + RGB_current_mode = rgblight_config.mode; + } + return false; + break; + } + return true; +} + +void matrix_init_user(void) { + #ifdef USE_I2C + i2c_master_init(); + #ifdef SSD1306OLED + // calls code for the SSD1306 OLED + _delay_ms(400); + TWI_Init(TWI_BIT_PRESCALE_1, TWI_BITLENGTH_FROM_FREQ(1, 800000)); + iota_gfx_init(); // turns on the display + #endif + #endif + #ifdef AUDIO_ENABLE + startup_user(); + #endif +} + +void matrix_scan_user(void) { + #ifdef SSD1306OLED + iota_gfx_task(); // this is what updates the display continuously + #endif +} + +#ifdef AUDIO_ENABLE + +void startup_user() +{ + _delay_ms(20); // gets rid of tick + PLAY_SONG(tone_startup); +} + +void shutdown_user() +{cc + PLAY_SONG(tone_goodbye); + _delay_ms(150); + stop_all_notes(); +} + +void music_on_user(void) +{ + music_scale_user(); +} + +void music_scale_user(void) +{ + PLAY_SONG(music_scale); +} + +#endif + +/* + * Macro definition + */ +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + if (!eeconfig_is_enabled()) { + eeconfig_init(); + } + + switch (id) { + case KC_DEMOMACRO: + if (record->event.pressed){ + return MACRO (I(1), T(H),T(E),T(L), T(L), T(O), T(SPACE), T(W), T(O), T(R), T(L), T(D), END); + } + } + + return MACRO_NONE; +} + +void matrix_update(struct CharacterMatrix *dest, + const struct CharacterMatrix *source) { + if (memcmp(dest->display, source->display, sizeof(dest->display))) { + memcpy(dest->display, source->display, sizeof(dest->display)); + dest->dirty = true; + } +} + +//assign the right code to your layers for OLED display +#define L_BASE 0 +#define L_LOWER 8 +#define L_RAISE 16 +#define L_FNLAYER 64 +#define L_NUMLAY 128 +#define L_NLOWER 136 +#define L_NFNLAYER 192 +#define L_MOUSECURSOR 256 +#define L_ADJUST 65560 + +void iota_gfx_task_user(void) { +#if DEBUG_TO_SCREEN + if (debug_enable) { + return; + } +#endif + + struct CharacterMatrix matrix; + + matrix_clear(&matrix); + matrix_write_P(&matrix, PSTR("USB: ")); +#ifdef PROTOCOL_LUFA + switch (USB_DeviceState) { + case DEVICE_STATE_Unattached: + matrix_write_P(&matrix, PSTR("Unattached")); + break; + case DEVICE_STATE_Suspended: + matrix_write_P(&matrix, PSTR("Suspended")); + break; + case DEVICE_STATE_Configured: + matrix_write_P(&matrix, PSTR("Connected")); + break; + case DEVICE_STATE_Powered: + matrix_write_P(&matrix, PSTR("Powered")); + break; + case DEVICE_STATE_Default: + matrix_write_P(&matrix, PSTR("Default")); + break; + case DEVICE_STATE_Addressed: + matrix_write_P(&matrix, PSTR("Addressed")); + break; + default: + matrix_write_P(&matrix, PSTR("Invalid")); + } +#endif + +// Define layers here, Have not worked out how to have text displayed for each layer. Copy down the number you see and add a case for it below + + char buf[40]; + snprintf(buf,sizeof(buf), "Undef-%ld", layer_state); + matrix_write_P(&matrix, PSTR("\n\nLayer: ")); + switch (layer_state) { + case L_BASE: + matrix_write_P(&matrix, PSTR("Default")); + break; + case L_RAISE: + matrix_write_P(&matrix, PSTR("Raise")); + break; + case L_LOWER: + matrix_write_P(&matrix, PSTR("Lower")); + break; + case L_ADJUST: + matrix_write_P(&matrix, PSTR("ADJUST")); + break; + default: + matrix_write(&matrix, buf); + } + + // Host Keyboard LED Status + char led[40]; + snprintf(led, sizeof(led), "\n%s %s %s", + (host_keyboard_leds() & (1<<USB_LED_NUM_LOCK)) ? "NUMLOCK" : " ", + (host_keyboard_leds() & (1<<USB_LED_CAPS_LOCK)) ? "CAPS" : " ", + (host_keyboard_leds() & (1<<USB_LED_SCROLL_LOCK)) ? "SCLK" : " "); + matrix_write(&matrix, led); + matrix_update(&display, &matrix); +} diff --git a/keyboards/hadron/ver2/keymaps/side_numpad/readme.md b/keyboards/hadron/ver2/keymaps/side_numpad/readme.md new file mode 100644 index 0000000000..de9680b498 --- /dev/null +++ b/keyboards/hadron/ver2/keymaps/side_numpad/readme.md @@ -0,0 +1,2 @@ +# The Default Planck Layout + diff --git a/keyboards/hadron/ver2/keymaps/side_numpad/rules.mk b/keyboards/hadron/ver2/keymaps/side_numpad/rules.mk new file mode 100644 index 0000000000..687c285bdb --- /dev/null +++ b/keyboards/hadron/ver2/keymaps/side_numpad/rules.mk @@ -0,0 +1,26 @@ + + +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = no # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +MIDI_ENABLE = yes # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. +SWAP_HANDS_ENABLE = no # Enable one-hand typing + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif
\ No newline at end of file |