diff options
Diffstat (limited to 'keyboards/hadron/keymaps/side_numpad')
| -rw-r--r-- | keyboards/hadron/keymaps/side_numpad/config.h | 20 | ||||
| -rw-r--r-- | keyboards/hadron/keymaps/side_numpad/keymap.c | 502 | ||||
| -rw-r--r-- | keyboards/hadron/keymaps/side_numpad/readme.md | 2 | ||||
| -rw-r--r-- | keyboards/hadron/keymaps/side_numpad/rules.mk | 26 |
4 files changed, 0 insertions, 550 deletions
diff --git a/keyboards/hadron/keymaps/side_numpad/config.h b/keyboards/hadron/keymaps/side_numpad/config.h deleted file mode 100644 index 09922b61bc..0000000000 --- a/keyboards/hadron/keymaps/side_numpad/config.h +++ /dev/null @@ -1,20 +0,0 @@ -#ifndef CONFIG_USER_H -#define CONFIG_USER_H - -#include "../../config.h" - -#define LEADER_TIMEOUT 300 -//#define BACKLIGHT_BREATHING - -#define USE_I2C -#define SSD1306OLED -#define OLED_ROTATE180 - -/* ws2812 RGB LED*/ -#define RGB_DI_PIN D4 -#define RGBLIGHT_ANIMATIONS -#define RGBLED_NUM 14 // Number of LEDs -#define RGBLIGHT_HUE_STEP 10 -#define RGBLIGHT_SAT_STEP 17 - -#endif diff --git a/keyboards/hadron/keymaps/side_numpad/keymap.c b/keyboards/hadron/keymaps/side_numpad/keymap.c deleted file mode 100644 index fa42c79ea0..0000000000 --- a/keyboards/hadron/keymaps/side_numpad/keymap.c +++ /dev/null @@ -1,502 +0,0 @@ -#include QMK_KEYBOARD_H -#include "LUFA/Drivers/Peripheral/TWI.h" -#ifdef AUDIO_ENABLE - #include "audio.h" -#endif -#ifdef USE_I2C -#include "i2c.h" -#endif -#ifdef SSD1306OLED -#include "ssd1306.h" -#endif -extern keymap_config_t keymap_config; - -//Following line allows macro to read current RGB settings -extern rgblight_config_t rgblight_config; - -// Each layer gets a name for readability, which is then used in the keymap matrix below. -// The underscores don't mean anything - you can have a layer called STUFF or any other name. -// Layer names don't all need to be of the same length, obviously, and you can also skip them -// entirely and just use numbers. -#define _QWERTY 0 -#define _LOWER 3 -#define _RAISE 4 -#define _FNLAYER 6 -#define _NUMLAY 7 -#define _MOUSECURSOR 8 -#define _ADJUST 16 - -enum preonic_keycodes { - QWERTY = SAFE_RANGE, - COLEMAK, - DVORAK, - LOWER, - RAISE, - BACKLIT, - RGBLED_TOGGLE, - RGBLED_STEP_MODE, - RGBLED_INCREASE_HUE, - RGBLED_DECREASE_HUE, - RGBLED_INCREASE_SAT, - RGBLED_DECREASE_SAT, - RGBLED_INCREASE_VAL, - RGBLED_DECREASE_VAL, -}; - -enum macro_keycodes { - KC_DEMOMACRO, -}; - -// Fillers to make layering more clear -#define _______ KC_TRNS -#define XXXXXXX KC_NO -// Custom macros -#define CTL_ESC CTL_T(KC_ESC) // Tap for Esc, hold for Ctrl -#define CTL_TTAB CTL_T(KC_TAB) // Tap for Esc, hold for Ctrl -#define CTL_ENT CTL_T(KC_ENT) // Tap for Enter, hold for Ctrl -#define SFT_ENT SFT_T(KC_ENT) // Tap for Enter, hold for Shift -// Requires KC_TRNS/_______ for the trigger key in the destination layer -#define LT_FN(kc) LT(_FNLAYER, kc) // L-ayer T-ap Function Layer -#define LT_MC(kc) LT(_MOUSECURSOR, kc) // L-ayer T-ap M-ouse C-ursor -#define LT_RAI(kc) LT(_RAISE, kc) // L-ayer T-ap to Raise -#define TG_NUMLAY TG(_NUMLAY) //Toggle for layer _NUMLAY -#define DEMOMACRO M(KC_DEMOMACRO) // My login macros - - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - -/* Qwerty - * ,------+------+------+------+------+------------------------------------------------. - * | Esc | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | - * |------+------+------+------+------+------+------+------+------+------+------+------+--------------------. - * | Tab | Q | W | E | R | T | Y | U | I | O | P | Bksp | 7 | 8 | 9 | - * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------| - * | CAPS | A | S | D | F | G | H | J | K | L | ; |Enter | 4 | 5 | 6 | - * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------| - * | Shift| Z | X | C | V | B | N | M | , | . | / | = | 1 | 2 | 3 | - * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------| - * | ~ | Ctrl | Alt | GUI |Lower |Space |Space |Raise | RAlt | Ins | Del |NumLay| 0 | . | ENT | - * `--------------------------------------------------------------------------------------------------------' - */ -[_QWERTY] = LAYOUT( - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS,\ - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, KC_P7, KC_P8, KC_P9, \ - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, LT_MC(KC_SCLN), CTL_ENT, KC_P4, KC_P5, KC_P6, \ - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_EQL, KC_P1, KC_P2, KC_P3, \ - KC_GRV, KC_RCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_RALT, KC_INS, KC_DEL, TG_NUMLAY, KC_P0, KC_PDOT, KC_PENT \ -), - -/* Lower - * ,-----------------------------------------------------------------------------------. - * | | | | | | | | | | | | | - * |------+------+------+------+------+------+------+------+------+------+------+------+--------------------. - * | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | ~ | \ | | | | - * |------+------+------+------+------+-------------+------+------+------+------+------+------+------+------| - * | CAPS | F1 | F2 | F3 | F4 | F5 | F6 | _ | + | { | } | | | | | | - * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------| - * | | F7 | F8 | F9 | F10 | F11 | F12 |ISO ~ |ISO | | [ | ] | | | | | - * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------| - * | | | | | | | | | Next | Vol- | Vol+ | Play | | | | - * `--------------------------------------------------------------------------------------------------------' - */ -[_LOWER] = LAYOUT( - KC_ESC, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \ - KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_GRV, KC_BSLS, _______, _______, _______, \ - KC_CAPS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_EQL, KC_LBRC, KC_RBRC, KC_PIPE, _______, _______, _______, \ - _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, S(KC_NUHS), S(KC_NUBS), KC_LCBR, KC_RCBR, _______, _______, _______, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY, _______, _______, _______\ -), - -/* Raise - * ,-----------------------------------------------------------------------------------. - * | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | - * |------+------+------+------+------+------+------+------+------+------+------+------+--------------------. - * | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | ~ | \ | | | | - * |------+------+------+------+------+-------------+------+------+------+------+------+------+------+------| - * | | A | Up | D | PrSc | | 4 | 5 | 6 | * | : | ' | | | | - * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------| - * | | Lt | Dn | Rt | Mute | | 1 | 2 | 3 | Up | / | | | | | - * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------| - * | | | | | |Space | 0 | | Left | Down | Right| | | | | - * `--------------------------------------------------------------------------------------------------------' - */ -[_RAISE] = LAYOUT( - KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, \ - KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_PLUS, KC_BSLS, _______, _______, _______, \ - _______, KC_A, KC_UP, KC_D, KC_PSCR, _______, KC_4, KC_5, KC_6, KC_PAST, KC_COLN, KC_QUOT, _______, _______, _______, \ - _______, KC_LEFT, KC_DOWN, KC_RIGHT, KC__MUTE, _______, KC_1, KC_2, KC_3, KC_UP, KC_SLSH, _______, _______, _______, _______, \ - _______, _______, _______, _______, _______, KC_SPC, KC_0, _______, KC_LEFT, KC_DOWN, KC_RIGHT, _______, _______, _______, _______ \ -), - -/* FN layer on Esc key - * ,-----------------------------------------------------------------------------------. - * | | | | | | | | | | | | | - * |------+------+------+------+------+------+------+------+------+------+------+------+--------------------. - * | | ! | @ | # | $ | % | ^ | & | * | ( | ) | + | | | | - * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------| - * | | F1 | F2 | F3 | F4 | F5 | F6 | _ | = | [ | ] | ' | | | | - * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------| - * | | F7 | F8 | F9 | F10 | F11 | F12 |ISO ~ |ISO | | { | } | | | | | - * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------| - * | | | | | | | | | Next | Vol- | Vol+ | Play | | | | - * `--------------------------------------------------------------------------------------------------------' - */ -[_FNLAYER] = LAYOUT( - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,\ - _______, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_PLUS, _______, _______, _______, \ - _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_EQL, KC_LBRC, KC_RBRC, KC_QUOT, _______, _______, _______, \ - _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,S(KC_NUHS), S(KC_NUBS), KC_LCBR, KC_RCBR, _______, _______, _______, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY, _______, _______, _______ \ -), - -/* Num Layer - * ,-----------------------------------------------------------------------------------. - * | | | | | | | | | | | | | - * |------+------+------+------+------+------+------+------+------+------+------+------+--------------------. - * | | | | | | | | | | | | | F7 | F8 | F9 | - * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------| - * | | | | | | | | | | | | | F4 | F5 | F6 | - * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------| - * | | | | | | | | | | | | | | Up | | - * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------| - * | | | | | | | | | | | | Exit | Left | Down | Rght | - * `--------------------------------------------------------------------------------------------------------' - */ -[_NUMLAY] = LAYOUT( - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,\ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_INS, KC_HOME, KC_PGUP, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL, KC_END, KC_PGDN, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_PMNS, KC_UP, KC_PPLS, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_RIGHT \ -), - -/* Mouse Layer (semi-col) - * ,-----------------------------------------------------------------------------------. - * | |ACCL0| ACCL1| ACCL2 | | | | | | | | | - * |------+------+------+------+------+------+------+------+------+------+------+------+--------------------. - * | | | | | | Home | Wh_Up| WHL_L| M_Up | WHL_R| | | | | | - * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------| - * | | | | | | End | Wh_Dn| M_Lft| M_Dn | M_Rt | | | | | | - * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------| - * | | | | | | | BTN2 | BTN3 | BTN4 | BTN5 | | | | | | - * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------| - * | | | | | | BTN1 | | | | BTN1 | | | | | | - * `--------------------------------------------------------------------------------------------------------' - */ - -[_MOUSECURSOR] = LAYOUT( - _______, KC_ACL0, KC_ACL1, KC_ACL2, _______, _______, _______, _______, _______, _______, _______, _______,\ - _______, _______, _______, _______, _______, KC_HOME, KC_PGUP, KC_WH_L, KC_MS_U, KC_WH_R, DEMOMACRO, _______, _______, _______, _______, \ - _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_END , KC_PGDN, KC_MS_L, KC_MS_D, KC_MS_R, _______, _______, _______, _______, _______, \ - _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, _______, KC_BTN2, KC_BTN3, KC_BTN4, KC_BTN5, _______, _______, _______, _______, _______, \ - _______, _______, _______, _______, _______, KC_BTN1, KC_BTN1, _______, _______, _______, _______, _______, _______, _______, _______ \ -), - -/* Adjust (Lower + Raise) - - * ,-----------------------------------------------------------------------------------. - * | Reset| | | | | | | | | VolD | VolU | Mute | - * |------+------+------+------+------+------+------+------+------+------+------+------+--------------------. - * | |RGB TG|RGB ST|RGBH -|RGBH +|RGBS -|RGBS +|RGBV -|RGBV +| | | Del | | | | - * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------| - * | | | |Aud on|Audoff|AGnorm|AGswap|Qwerty| | | | | | | | - * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------| - * | |Voice-|Voice+|Mus on|Musoff|MIDIon|MIDIof| | BL + |BL ST |BLSTEP| BL TG| | | | - * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------| - * | | | | | | | | | | | | | | | | - * `--------------------------------------------------------------------------------------------------------' - */ -[_ADJUST] = LAYOUT( - RESET, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_VOLD, KC_VOLU, KC_MUTE, \ - _______, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, _______, KC_DEL, _______, _______, _______, \ - _______, _______, _______, AU_ON, AU_OFF, AG_NORM, AG_SWAP, QWERTY, _______, _______, _______, _______, _______, _______, _______, \ - _______, MUV_DE, MUV_IN, MU_ON, MU_OFF, MI_ON, MI_OFF, _______, BL_DEC, BL_INC, BL_STEP, BL_TOGG, _______, _______, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \ -) - - - -}; - - -#ifdef AUDIO_ENABLE - -float tone_startup[][2] = SONG(STARTUP_SOUND); -float tone_qwerty[][2] = SONG(QWERTY_SOUND); -float music_scale[][2] = SONG(MUSIC_SCALE_SOUND); -float tone_goodbye[][2] = SONG(GOODBYE_SOUND); -#endif - -// define variables for reactive RGB -bool RGB_INIT = false; -bool TOG_STATUS = false; -bool NUMLAY_STATUS = false; -int RGB_current_mode; - - - -void persistant_default_layer_set(uint16_t default_layer) { - eeconfig_update_default_layer(default_layer); - default_layer_set(default_layer); -} - -void update_tri_layer_RGB(uint8_t layer1, uint8_t layer2, uint8_t layer3) { - if (IS_LAYER_ON(layer1) && IS_LAYER_ON(layer2)) { - rgblight_mode(RGB_current_mode); - layer_on(layer3); - } else { - layer_off(layer3); - } -} - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - switch (keycode) { - case QWERTY: - if (record->event.pressed) { - #ifdef AUDIO_ENABLE - PLAY_SONG(tone_qwerty); - #endif - persistant_default_layer_set(1UL<<_QWERTY); - } - return false; - break; - case LOWER: - if (record->event.pressed) { - //not sure how to have keyboard check mode and set it to a variable, so my work around - //uses another variable that would be set to true after the first time a reactive key is pressed. - if (RGB_INIT) {} else { - RGB_current_mode = rgblight_config.mode; - RGB_INIT = true; - } - if (TOG_STATUS) { //TOG_STATUS checks is another reactive key currently pressed, only changes RGB mode if returns false - } else { - TOG_STATUS = !TOG_STATUS; - rgblight_mode(16); - } - layer_on(_LOWER); - update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST); - } else { - rgblight_mode(RGB_current_mode); // revert RGB to initial mode prior to RGB mode change - TOG_STATUS = false; - layer_off(_LOWER); - update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST); - } - return false; - break; - case RAISE: - if (record->event.pressed) { - //not sure how to have keyboard check mode and set it to a variable, so my work around - //uses another variable that would be set to true after the first time a reactive key is pressed. - if (RGB_INIT) {} else { - RGB_current_mode = rgblight_config.mode; - RGB_INIT = true; - } - if (TOG_STATUS) { //TOG_STATUS checks is another reactive key currently pressed, only changes RGB mode if returns false - } else { - TOG_STATUS = !TOG_STATUS; - rgblight_mode(15); - } - layer_on(_RAISE); - update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST); - } else { - rgblight_mode(RGB_current_mode); // revert RGB to initial mode prior to RGB mode change - layer_off(_RAISE); - TOG_STATUS = false; - update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST); - } - return false; - break; - case BACKLIT: - if (record->event.pressed) { - register_code(KC_RSFT); - #ifdef BACKLIGHT_ENABLE - backlight_step(); - #endif - } else { - unregister_code(KC_RSFT); - } - return false; - break; - //my attempt for RGB layer lock indication via changing the mode, still have to figure out how to not have other keypress not override this mode - case TG_NUMLAY: - if (record->event.pressed) { - if (RGB_INIT) {} else { - RGB_current_mode = rgblight_config.mode; - RGB_INIT = true; - } - NUMLAY_STATUS = !NUMLAY_STATUS; - if (NUMLAY_STATUS) { - rgblight_mode(4); - layer_on(_NUMLAY); - } else { - rgblight_mode(RGB_current_mode); - layer_off(_NUMLAY); } - } - return false; - break; - case RGB_MOD: - //led operations - RGB mode change now updates the RGB_current_mode to allow the right RGB mode to be set after reactive keys are released - if (record->event.pressed) { - rgblight_mode(RGB_current_mode); - rgblight_step(); - RGB_current_mode = rgblight_config.mode; - } - return false; - break; - } - return true; -} - -void matrix_init_user(void) { - #ifdef USE_I2C - i2c_master_init(); - #ifdef SSD1306OLED - // calls code for the SSD1306 OLED - _delay_ms(400); - TWI_Init(TWI_BIT_PRESCALE_1, TWI_BITLENGTH_FROM_FREQ(1, 800000)); - iota_gfx_init(); // turns on the display - #endif - #endif - #ifdef AUDIO_ENABLE - startup_user(); - #endif -} - -void matrix_scan_user(void) { - #ifdef SSD1306OLED - iota_gfx_task(); // this is what updates the display continuously - #endif -} - -#ifdef AUDIO_ENABLE - -void startup_user() -{ - _delay_ms(20); // gets rid of tick - PLAY_SONG(tone_startup); -} - -void shutdown_user() -{cc - PLAY_SONG(tone_goodbye); - _delay_ms(150); - stop_all_notes(); -} - -void music_on_user(void) -{ - music_scale_user(); -} - -void music_scale_user(void) -{ - PLAY_SONG(music_scale); -} - -#endif - -/* - * Macro definition - */ -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - if (!eeconfig_is_enabled()) { - eeconfig_init(); - } - - switch (id) { - case KC_DEMOMACRO: - if (record->event.pressed){ - return MACRO (I(1), T(H),T(E),T(L), T(L), T(O), T(SPACE), T(W), T(O), T(R), T(L), T(D), END); - } - } - - return MACRO_NONE; -} - -void matrix_update(struct CharacterMatrix *dest, - const struct CharacterMatrix *source) { - if (memcmp(dest->display, source->display, sizeof(dest->display))) { - memcpy(dest->display, source->display, sizeof(dest->display)); - dest->dirty = true; - } -} - -//assign the right code to your layers for OLED display -#define L_BASE 0 -#define L_LOWER 8 -#define L_RAISE 16 -#define L_FNLAYER 64 -#define L_NUMLAY 128 -#define L_NLOWER 136 -#define L_NFNLAYER 192 -#define L_MOUSECURSOR 256 -#define L_ADJUST 65560 - -void iota_gfx_task_user(void) { -#if DEBUG_TO_SCREEN - if (debug_enable) { - return; - } -#endif - - struct CharacterMatrix matrix; - - matrix_clear(&matrix); - matrix_write_P(&matrix, PSTR("USB: ")); -#ifdef PROTOCOL_LUFA - switch (USB_DeviceState) { - case DEVICE_STATE_Unattached: - matrix_write_P(&matrix, PSTR("Unattached")); - break; - case DEVICE_STATE_Suspended: - matrix_write_P(&matrix, PSTR("Suspended")); - break; - case DEVICE_STATE_Configured: - matrix_write_P(&matrix, PSTR("Connected")); - break; - case DEVICE_STATE_Powered: - matrix_write_P(&matrix, PSTR("Powered")); - break; - case DEVICE_STATE_Default: - matrix_write_P(&matrix, PSTR("Default")); - break; - case DEVICE_STATE_Addressed: - matrix_write_P(&matrix, PSTR("Addressed")); - break; - default: - matrix_write_P(&matrix, PSTR("Invalid")); - } -#endif - -// Define layers here, Have not worked out how to have text displayed for each layer. Copy down the number you see and add a case for it below - - char buf[40]; - snprintf(buf,sizeof(buf), "Undef-%ld", layer_state); - matrix_write_P(&matrix, PSTR("\n\nLayer: ")); - switch (layer_state) { - case L_BASE: - matrix_write_P(&matrix, PSTR("Default")); - break; - case L_RAISE: - matrix_write_P(&matrix, PSTR("Raise")); - break; - case L_LOWER: - matrix_write_P(&matrix, PSTR("Lower")); - break; - case L_ADJUST: - matrix_write_P(&matrix, PSTR("ADJUST")); - break; - default: - matrix_write(&matrix, buf); - } - - // Host Keyboard LED Status - char led[40]; - snprintf(led, sizeof(led), "\n%s %s %s", - (host_keyboard_leds() & (1<<USB_LED_NUM_LOCK)) ? "NUMLOCK" : " ", - (host_keyboard_leds() & (1<<USB_LED_CAPS_LOCK)) ? "CAPS" : " ", - (host_keyboard_leds() & (1<<USB_LED_SCROLL_LOCK)) ? "SCLK" : " "); - matrix_write(&matrix, led); - matrix_update(&display, &matrix); -} diff --git a/keyboards/hadron/keymaps/side_numpad/readme.md b/keyboards/hadron/keymaps/side_numpad/readme.md deleted file mode 100644 index de9680b498..0000000000 --- a/keyboards/hadron/keymaps/side_numpad/readme.md +++ /dev/null @@ -1,2 +0,0 @@ -# The Default Planck Layout - diff --git a/keyboards/hadron/keymaps/side_numpad/rules.mk b/keyboards/hadron/keymaps/side_numpad/rules.mk deleted file mode 100644 index 687c285bdb..0000000000 --- a/keyboards/hadron/keymaps/side_numpad/rules.mk +++ /dev/null @@ -1,26 +0,0 @@ - - -# Build Options -# change to "no" to disable the options, or define them in the Makefile in -# the appropriate keymap folder that will get included automatically -# -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = no # Commands for debug and configuration -NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -MIDI_ENABLE = yes # MIDI controls -AUDIO_ENABLE = no # Audio output on port C6 -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. -SWAP_HANDS_ENABLE = no # Enable one-hand typing - -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend - -ifndef QUANTUM_DIR - include ../../../../Makefile -endif
\ No newline at end of file |