diff options
Diffstat (limited to 'keyboards/gray_studio')
34 files changed, 959 insertions, 338 deletions
diff --git a/keyboards/gray_studio/cod67/cod67.h b/keyboards/gray_studio/cod67/cod67.h index 2d3911e69c..ed4a729971 100644 --- a/keyboards/gray_studio/cod67/cod67.h +++ b/keyboards/gray_studio/cod67/cod67.h @@ -19,11 +19,11 @@ #include "quantum.h" #define LAYOUT( \ - K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K48, \ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, \ K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, \ - K40, K41, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, K4C, K4D \ + K40, K41, K42, K43, K44, K45, K46, K47, K0D, K49, K4A, K4B, K4C, K4D \ ) \ { \ { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D }, \ diff --git a/keyboards/gray_studio/cod67/config.h b/keyboards/gray_studio/cod67/config.h index 47b42d8a60..2231827ba6 100644 --- a/keyboards/gray_studio/cod67/config.h +++ b/keyboards/gray_studio/cod67/config.h @@ -15,18 +15,17 @@ You should have received a copy of the GNU General Public License along with this program. If not, see <http://www.gnu.org/licenses/>. */ -#ifndef CONFIG_H -#define CONFIG_H +#pragma once #include "config_common.h" /* USB Device descriptor parameter */ #define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x0000 +#define PRODUCT_ID 0x0C0D #define DEVICE_VER 0x0001 -#define MANUFACTURER Gray -#define PRODUCT cod67 -#define DESCRIPTION 60% Custom Keyboard +#define MANUFACTURER Gray Studio +#define PRODUCT COD67 +#define DESCRIPTION 60% custom keyboard /* key matrix size */ #define MATRIX_ROWS 5 @@ -49,135 +48,27 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* COL2ROW, ROW2COL*/ #define DIODE_DIRECTION COL2ROW +/* D4 is not a PWM pin, but look at timer assisted software PWM if you want something other than toggle + * https://docs.qmk.fm/#/feature_backlight?id=timer-assisted-pwm-implementation + */ #define BACKLIGHT_PIN D4 -#define BACKLIGHT_LEVELS 3 + +#define RGB_DI_PIN B2 +#ifdef RGB_DI_PIN + #define RGBLED_NUM 20 + #define RGBLIGHT_HUE_STEP 8 + #define RGBLIGHT_SAT_STEP 8 + #define RGBLIGHT_VAL_STEP 8 + #define RGBLIGHT_LIMIT_VAL 255 + #define RGBLIGHT_SLEEP + #define RGBLIGHT_ANIMATIONS +#endif /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ #define DEBOUNCE 5 -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is userful for the Windows task manager shortcut (ctrl+shift+esc). - */ -// #define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -//#define NO_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION - -/* - * MIDI options - */ - -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - -/* enable basic MIDI features: - - MIDI notes can be sent when in Music mode is on -*/ -//#define MIDI_BASIC - -/* enable advanced MIDI features: - - MIDI notes can be added to the keymap - - Octave shift and transpose - - Virtual sustain, portamento, and modulation wheel - - etc. -*/ -//#define MIDI_ADVANCED - -/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ -//#define MIDI_TONE_KEYCODE_OCTAVES 1 - -#endif diff --git a/keyboards/gray_studio/cod67/keymaps/default/keymap.c b/keyboards/gray_studio/cod67/keymaps/default/keymap.c index 9e1273a189..5403bf406f 100644 --- a/keyboards/gray_studio/cod67/keymaps/default/keymap.c +++ b/keyboards/gray_studio/cod67/keymaps/default/keymap.c @@ -19,29 +19,13 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { LAYOUT( KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS) + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, + KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_TRNS, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_DEL, + KC_LCTL, KC_LGUI, KC_LALT, KC_TRNS, KC_TRNS, KC_SPC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_RGUI, KC_LEFT, KC_DOWN, KC_RGHT) }; -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - // MACRODOWN only works in this function - switch(id) { - case 0: - if (record->event.pressed) { - register_code(KC_RSFT); - } else { - unregister_code(KC_RSFT); - } - break; - } - return MACRO_NONE; -}; - - void matrix_init_user(void) { } diff --git a/keyboards/gray_studio/cod67/keymaps/default/readme.md b/keyboards/gray_studio/cod67/keymaps/default/readme.md index cfbf846a9a..4b45689de8 100644 --- a/keyboards/gray_studio/cod67/keymaps/default/readme.md +++ b/keyboards/gray_studio/cod67/keymaps/default/readme.md @@ -1 +1,5 @@ -# The default keymap for cod67 +# The default keymap for a COD67 + +The default map only implements the default layer from the map on [ydkb.io](http://ydkb.io). + +If you want an example of a multi-layer map, look at [rys's map](../rys). diff --git a/keyboards/gray_studio/cod67/keymaps/rys/keymap.c b/keyboards/gray_studio/cod67/keymaps/rys/keymap.c new file mode 100644 index 0000000000..9f1d069b73 --- /dev/null +++ b/keyboards/gray_studio/cod67/keymaps/rys/keymap.c @@ -0,0 +1,23 @@ +#include QMK_KEYBOARD_H + +enum layers { + _TOP, + _FN +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_TOP] = LAYOUT( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, _______, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_DEL, + KC_LCTL, KC_LALT, KC_LGUI, _______, _______, KC_SPC, _______, _______, _______, KC_RGUI, MO(_FN), KC_LEFT, KC_DOWN, KC_RGHT + ), + [_FN] = LAYOUT( + _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, + _______, RGB_TOG, RGB_MOD,RGB_RMOD, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, RGB_HUI, RGB_SAI, RGB_VAI, _______, _______, _______, _______, _______, _______, _______, _______, _______, BL_TOGG, + _______, RGB_HUD, RGB_SAD, RGB_VAD, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, RESET, _______, _______, _______, _______, _______, _______, _______, _______ + ) +}; diff --git a/keyboards/gray_studio/cod67/keymaps/rys/readme.md b/keyboards/gray_studio/cod67/keymaps/rys/readme.md new file mode 100644 index 0000000000..8214809bba --- /dev/null +++ b/keyboards/gray_studio/cod67/keymaps/rys/readme.md @@ -0,0 +1,5 @@ +# Rys's keymap for a COD67 + +The COD67 supports really nice RGB underglow which you can see through the mid diffuser. I've put control for that on layer 1, along with reset on `Space`, backlight toggle on `Enter`, and the function row. The board supports all of the QMK RGB effects. + +Look at the excellent [RGB Lighting](https://docs.qmk.fm/#/feature_rgblight) docs on the QMK site for more controls. diff --git a/keyboards/gray_studio/cod67/readme.md b/keyboards/gray_studio/cod67/readme.md index 7f91cf30d1..6e79ffec4a 100644 --- a/keyboards/gray_studio/cod67/readme.md +++ b/keyboards/gray_studio/cod67/readme.md @@ -1,30 +1,45 @@ # Gray COD67 -The Gray COD67 is a 60% keyboard with a modern and bold design. It features 20 RGB Underglow LED lights and a unique diffuser placement. The COD67 has the most stunning RGB light strip for a custom mechanical keyboard. It also features a center mounted USB C port. +The Gray COD67 is a 60% keyboard with a modern and bold design. It features 20 RGB Underglow LED lights and a unique diffuser placement. The COD67 has the most stunning RGB light strip for a custom mechanical keyboard. It also features a center mounted USB C port. -There were only 75 units made worldwide. +There were only 75 units made worldwide. Keyboard Maintainer: [MechMerlin](https://github.com/mechmerlin) Hardware Supported: Gray COD67 Hardware Availability: [Zfrontier](https://en.zfrontier.com/products/cod67) -At this time, flashing ONLY works on Windows systems. +## Bootloader mode -To put in bootloader mode, hold the `Esc` key while plugging in the USB cable. +To put in bootloader mode, hold the `Esc` key while plugging in the USB cable. -The COD67 will show up as a drive. +## Making firmware Make example for this keyboard (after setting up your build environment): - make gray_studio/cod67:default:bin + make gray_studio/cod67:default See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). -Rename the resulting `.bin` file to `cod67.bin`. +## Flashing in Windows -Drag and drop `cod67.bin` to the drive, overwriting the previous `cod67.bin` stored on it. +After putting your COD67 in bootloader mode, it will show up as a drive. -Press the `Esc` key again to reset the board. You are now ready to type! +* Rename the resulting `.bin` file to `COD67.BIN`. +* Drag and drop your new `COD67.BIN` to the drive, overwriting the previous `COD67.BIN` stored on it. +* Wait a few seconds for it to write. The caps lock LED flashes rapidly while writing. +* Press the `Esc` key again to reset the board. You are now ready to type! + +## Flashing in macOS + +After putting your COD67 in bootloader mode, it will show up as a drive. + +* Rename the resulting `.bin` file to `COD67.BIN`. +* Drag the existing `COD67.BIN` file from the drive to the Trash in Finder. +* Empty the Trash in Finder. It's important you do that due to how macOS handles hidden `.Trashes` on removable drives. It needs to be empty to free up flash space. +* Drag and drop your new `COD67.BIN` to the drive. +* Wait a few seconds for it to write. The caps lock LED flashes rapidly while writing. +* Press the `Esc` key or eject the drive in Finder to reset the board. You are now ready to type! ## Notes -The backlight pin is attached to a non PWM pin `D4` so backlight is only on/off. + +The backlight pin is attached to a non PWM pin `D4` so the backlight is only on/off. diff --git a/keyboards/gray_studio/cod67/rules.mk b/keyboards/gray_studio/cod67/rules.mk index 45eb6ee376..0bed09539f 100644 --- a/keyboards/gray_studio/cod67/rules.mk +++ b/keyboards/gray_studio/cod67/rules.mk @@ -1,66 +1,33 @@ # MCU name -#MCU = at90usb1286 MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp +BOOTLOADER = atmel-dfu # actually lufa-ms +# Mass storage bootloader on the COD67 uses bin files +FIRMWARE_FORMAT = bin # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) MOUSEKEY_ENABLE = yes # Mouse keys(+4700) EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = yes # Console for debug(+400) +CONSOLE_ENABLE = no # Console for debug(+400) COMMAND_ENABLE = yes # Commands for debug and configuration # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = yes # Enable RGB underglow MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID diff --git a/keyboards/gray_studio/hb85/config.h b/keyboards/gray_studio/hb85/config.h index da230f7e8d..dff360ec6a 100644 --- a/keyboards/gray_studio/hb85/config.h +++ b/keyboards/gray_studio/hb85/config.h @@ -19,6 +19,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define VENDOR_ID 0x20A0 #define PRODUCT_ID 0x422F +#define DEVICE_VER 0x0200 #define MANUFACTURER Gray Studio #define PRODUCT HB85 diff --git a/keyboards/gray_studio/hb85/hb85.c b/keyboards/gray_studio/hb85/hb85.c index 3e42023587..21562b9e0f 100644 --- a/keyboards/gray_studio/hb85/hb85.c +++ b/keyboards/gray_studio/hb85/hb85.c @@ -16,33 +16,7 @@ You should have received a copy of the GNU General Public License along with this program. If not, see <http://www.gnu.org/licenses/>. */ -#include <string.h> - -#include "rgblight.h" - -#include "i2c_master.h" -#include "quantum.h" - -#ifdef RGBLIGHT_ENABLE -extern rgblight_config_t rgblight_config; - -void rgblight_set(void) { - if (!rgblight_config.enable) { - for (uint8_t i = 0; i < RGBLED_NUM; i++) { - led[i].r = 0; - led[i].g = 0; - led[i].b = 0; - } - } - - i2c_init(); - i2c_transmit(0xb0, (uint8_t*)led, 3 * RGBLED_NUM, 100); -} -#endif - -__attribute__ ((weak)) -void matrix_scan_user(void) { -} +#include "hb85.h" void backlight_init_ports(void) { // initialize pins D0, D1, D4 and D6 as output @@ -51,7 +25,7 @@ void backlight_init_ports(void) { setPinOutput(D4); setPinOutput(D6); - // turn RGB LEDs on + // turn backlight LEDs on writePinHigh(D0); writePinHigh(D1); writePinHigh(D4); @@ -59,17 +33,17 @@ void backlight_init_ports(void) { } void backlight_set(uint8_t level) { - if (level == 0) { - // turn RGB LEDs off + if (level == 0) { + // turn backlight LEDs off writePinLow(D0); writePinLow(D1); writePinLow(D4); writePinLow(D6); - } else { - // turn RGB LEDs on + } else { + // turn backlight LEDs on writePinHigh(D0); writePinHigh(D1); writePinHigh(D4); writePinHigh(D6); - } + } } diff --git a/keyboards/gray_studio/hb85/rules.mk b/keyboards/gray_studio/hb85/rules.mk index c3e17e4932..ec57b03dcb 100644 --- a/keyboards/gray_studio/hb85/rules.mk +++ b/keyboards/gray_studio/hb85/rules.mk @@ -1,33 +1,14 @@ -# Copyright 2019 fcoury <felipe.coury@gmail.com> -# -# This program is free software: you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation, either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program. If not, see <http://www.gnu.org/licenses/>. - # MCU name MCU = atmega32a -PROTOCOL = VUSB - -# unsupported features for now -NO_UART = yes -NO_SUSPEND_POWER_DOWN = yes - -# processor frequency -F_CPU = 12000000 -# Bootloader -# This definition is optional, and if your keyboard supports multiple bootloaders of -# different sizes, comment this out, and the correct address will be loaded -# automatically (+60). See bootloader.mk for all options. +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = bootloadHID # build options @@ -38,11 +19,6 @@ CONSOLE_ENABLE = yes COMMAND_ENABLE = yes BACKLIGHT_ENABLE = no RGBLIGHT_ENABLE = yes -RGBLIGHT_CUSTOM_DRIVER = yes +WS2812_DRIVER = i2c OPT_DEFS = -DDEBUG_LEVEL=0 - -SRC += i2c_master.c - -# programming options -PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex diff --git a/keyboards/gray_studio/hb85/usbconfig.h b/keyboards/gray_studio/hb85/usbconfig.h index c52c90ce8a..186e2dca35 100644 --- a/keyboards/gray_studio/hb85/usbconfig.h +++ b/keyboards/gray_studio/hb85/usbconfig.h @@ -108,20 +108,10 @@ section at the end of this file). * (e.g. HID), but never want to send any data. This option saves a couple * of bytes in flash memory and the transmit buffers in RAM. */ -#define USB_CFG_INTR_POLL_INTERVAL 1 -/* If you compile a version with endpoint 1 (interrupt-in), this is the poll - * interval. The value is in milliseconds and must not be less than 10 ms for - * low speed devices. - */ #define USB_CFG_IS_SELF_POWERED 0 /* Define this to 1 if the device has its own power supply. Set it to 0 if the * device is powered from the USB bus. */ -#define USB_CFG_MAX_BUS_POWER 500 -/* Set this variable to the maximum USB bus power consumption of your device. - * The value is in milliamperes. [It will be divided by two since USB - * communicates power requirements in units of 2 mA.] - */ #define USB_CFG_IMPLEMENT_FN_WRITE 1 /* Set this to 1 if you want usbFunctionWrite() to be called for control-out * transfers. Set it to 0 if you don't need it and want to save a couple of @@ -237,7 +227,7 @@ section at the end of this file). * with libusb: 0x16c0/0x5dc. Use this VID/PID pair ONLY if you understand * the implications! */ -#define USB_CFG_DEVICE_VERSION 0x00, 0x02 +#define USB_CFG_DEVICE_VERSION (DEVICE_VER & 0xFF), ((DEVICE_VER >> 8) & 0xFF) /* Version number of the device: Minor number first, then major number. */ #define USB_CFG_VENDOR_NAME 'G', 'r', 'a', 'y', ' ', 'S', 't', 'u', 'd', 'i', 'o' diff --git a/keyboards/gray_studio/space65/info.json b/keyboards/gray_studio/space65/info.json index 9c1d439b41..72674bdef6 100644 --- a/keyboards/gray_studio/space65/info.json +++ b/keyboards/gray_studio/space65/info.json @@ -7,6 +7,10 @@ "layouts": { "LAYOUT": { "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"x":15, "y":0}, {"x":0, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1}, {"x":7.5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.5, "y":1, "w":1.5}, {"x":15, "y":1}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2}, {"x":11.75, "y":2}, {"x":12.75, "y":2, "w":2.25}, {"x":15, "y":2}, {"x":0, "y":3, "w":1.25}, {"x":1.25, "y":3}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3}, {"x":5.25, "y":3}, {"x":6.25, "y":3}, {"x":7.25, "y":3}, {"x":8.25, "y":3}, {"x":9.25, "y":3}, {"x":10.25, "y":3}, {"x":11.25, "y":3}, {"x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"x":15, "y":3}, {"x":0, "y":4, "w":1.25}, {"x":1.25, "y":4, "w":1.25}, {"x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":2.25}, {"x":6, "y":4, "w":1.25}, {"x":7.25, "y":4, "w":2.75}, {"x":10, "y":4, "w":1.25}, {"x":11.25, "y":4, "w":1.25}, {"x":13, "y":4}, {"x":14, "y":4}, {"x":15, "y":4}] + }, + + "LAYOUT_65_ansi_blocker": { + "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0, "w":2}, {"x":15, "y":0}, {"x":0, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1}, {"x":7.5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.5, "y":1, "w":1.5}, {"x":15, "y":1}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2}, {"x":11.75, "y":2}, {"x":12.75, "y":2, "w":2.25}, {"x":15, "y":2}, {"x":0, "y":3, "w":2.25}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3}, {"x":5.25, "y":3}, {"x":6.25, "y":3}, {"x":7.25, "y":3}, {"x":8.25, "y":3}, {"x":9.25, "y":3}, {"x":10.25, "y":3}, {"x":11.25, "y":3}, {"x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"x":15, "y":3}, {"x":0, "y":4, "w":1.25}, {"x":1.25, "y":4, "w":1.25}, {"x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"x":10, "y":4, "w":1.25}, {"x":11.25, "y":4, "w":1.25}, {"x":13, "y":4}, {"x":14, "y":4}, {"x":15, "y":4}] } } -}
\ No newline at end of file +} diff --git a/keyboards/gray_studio/space65/rules.mk b/keyboards/gray_studio/space65/rules.mk index 10bd7cf035..ced89eac04 100644 --- a/keyboards/gray_studio/space65/rules.mk +++ b/keyboards/gray_studio/space65/rules.mk @@ -1,63 +1,16 @@ # MCU name MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays.</ |