4 files changed, 7 insertions, 92 deletions
diff --git a/keyboards/gray_studio/space65/config.h b/keyboards/gray_studio/space65/config.h
index 2e3928e695..5f0817ba1b 100644
--- a/keyboards/gray_studio/space65/config.h
+++ b/keyboards/gray_studio/space65/config.h
@@ -48,10 +48,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* COL2ROW, ROW2COL*/
 #define DIODE_DIRECTION COL2ROW
 
-/*
- * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
- */
-#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
+#define LED_CAPS_LOCK_PIN E6
+#define LED_PIN_ON_STATE 0
 
 #define BACKLIGHT_PIN B7
 #define BACKLIGHT_BREATHING
diff --git a/keyboards/gray_studio/space65/space65.c b/keyboards/gray_studio/space65/space65.c
index 74a86a202d..d27a1f38c3 100644
--- a/keyboards/gray_studio/space65/space65.c
+++ b/keyboards/gray_studio/space65/space65.c
@@ -14,36 +14,3 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 #include "space65.h"
-
-void matrix_init_kb(void) {
-	// put your keyboard start-up code here
-	// runs once when the firmware starts up
-
-	setPinOutput(E6);
-	matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-	// put your looping keyboard code here
-	// runs every cycle (a lot)
-
-	matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-	// put your per-action keyboard code here
-	// runs for every action, just before processing by the firmware
-
-	return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
-	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-  if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) {
-    writePinLow(E6);
-  } else {
-    writePinHigh(E6);
-  }
-
-	led_set_user(usb_led);
-}
diff --git a/keyboards/gray_studio/think65/hotswap/config.h b/keyboards/gray_studio/think65/hotswap/config.h
index 05a818a731..5fe35201ac 100644
--- a/keyboards/gray_studio/think65/hotswap/config.h
+++ b/keyboards/gray_studio/think65/hotswap/config.h
@@ -46,6 +46,11 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #define DIODE_DIRECTION COL2ROW
 
+#define LED_NUM_LOCK_PIN C6
+#define LED_CAPS_LOCK_PIN C7
+#define LED_SCROLL_LOCK_PIN F7
+#define LED_PIN_ON_STATE 0
+
 #define RGB_DI_PIN E2
 #ifdef RGB_DI_PIN
     #define RGBLED_NUM 22
diff --git a/keyboards/gray_studio/think65/hotswap/hotswap.c b/keyboards/gray_studio/think65/hotswap/hotswap.c
index 07cdc8b1f7..60808979c9 100644
--- a/keyboards/gray_studio/think65/hotswap/hotswap.c
+++ b/keyboards/gray_studio/think65/hotswap/hotswap.c
@@ -14,58 +14,3 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 #include "hotswap.h"
-
-// Optional override functions below.
-// You can leave any or all of these undefined.
-// These are only required if you want to perform custom actions.
-
-
-void matrix_init_kb(void) {
-  // put your keyboard start-up code here
-  // runs once when the firmware starts up
-
-  setPinOutput(C6);
-  setPinOutput(C7);
-  setPinOutput(F7);
-  
-  matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-  // put your looping keyboard code here
-  // runs every cycle (a lot)
-
-  matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-  // put your per-action keyboard code here
-  // runs for every action, just before processing by the firmware
-
-  return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
-  // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-
-  if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) {
-    writePinLow(C7);
-  } else {
-    writePinHigh(C7);
-  }
-
-  if (IS_LED_ON(usb_led, USB_LED_NUM_LOCK)) {
-    writePinLow(C6);
-  } else {
-    writePinHigh(C6);
-  }
-
-  if (IS_LED_ON(usb_led, USB_LED_SCROLL_LOCK)) {
-    writePinLow(F7);
-  } else {
-    writePinHigh(F7);
-  }
-
-  led_set_user(usb_led);
-}
-