diff options
Diffstat (limited to 'keyboards/geonworks/frogmini/readme.md')
| -rw-r--r-- | keyboards/geonworks/frogmini/readme.md | 49 |
1 files changed, 49 insertions, 0 deletions
diff --git a/keyboards/geonworks/frogmini/readme.md b/keyboards/geonworks/frogmini/readme.md new file mode 100644 index 0000000000..7c7c2e00f9 --- /dev/null +++ b/keyboards/geonworks/frogmini/readme.md @@ -0,0 +1,49 @@ +# GeonWorks Frog Mini PCB firmware + + + +The Frog Mini is a 60% keyboard designed by GeonWorks, with PCB by Gondolindrim. + +Two PCB variants are offered: FM-S (solderable) and FM-H (hotswap with Kailh sockets). + +* Keyboard Maintainer: [Gondolindrim](https://github.com/gondolindrim) +* Hardware Availability: proprietary PCB sold by [Geon.Works](https://geon.works/) +* Website: [GeonWorks](https://geon.works/pages/frog-mini) + +## How to flash + +### Enter bootloader + +### Release Alpha: + +The DFU state in the bootloader can be accessed in 2 ways: + +* **Bootmagic reset**: hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard +* **Physical reset button**: press the button on the back of the PCB +* **Keycode in layout**: press the key mapped to `RESET` if it is available (ESC key at layer 1 in the default layout) + +### Release Beta: + +The DFU state in the bootloader can be accessed in 3 ways: + +* **Bootmagic reset**: hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard +* **Physical reset button**: press the button on the back of the PCB, for at least five seconds +* **Keycode in layout**: press the key mapped to `RESET` if it is available (ESC key at layer 1 in the default layout) + +## Compile firmware + +### FM-S (solderable) + +After accessing the DFU state in your PCB, build the default layout using: + + make geonworks/frogmini/fms:default + +### FM-H (hotswap) + +After accessing the DFU state in your PCB, build the default layout using: + + make geonworks/frogmini/fmh:default + +Then download the resulting binary `*bin` file using `dfu-util` or QMK Toolbox. + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). |