1 files changed, 0 insertions, 84 deletions
diff --git a/keyboards/gboards/gergo/gergo.c b/keyboards/gboards/gergo/gergo.c
deleted file mode 100644
index ba359f8145..0000000000
--- a/keyboards/gboards/gergo/gergo.c
+++ /dev/null
@@ -1,84 +0,0 @@
-#include QMK_KEYBOARD_H
-
-bool i2c_initialized = 0;
-i2c_status_t mcp23018_status = 0x20;
-
-void matrix_init_kb(void) {
-    // (tied to Vcc for hardware convenience)
-    //DDRB  &= ~(1<<4);  // set B(4) as input
-    //PORTB &= ~(1<<4);  // set B(4) internal pull-up disabled
-
-    // unused pins - C7, D4, D5, D7, E6
-    // set as input with internal pull-up enabled
-    DDRC  &= ~(1<<7);
-    DDRD  &= ~(1<<5 | 1<<4 | 1<<6 | 1<<7);
-    DDRE  &= ~(1<<6);
-    PORTC |=  (1<<7);
-    PORTD |=  (1<<5 | 1<<4 | 1<<6 | 1<<7);
-    PORTE |=  (1<<6);
-
-    matrix_init_user();
-}
-
-
-uint8_t init_mcp23018(void) {
-    print("starting init");
-    mcp23018_status = 0x20;
-
-    // I2C subsystem
-
-    // uint8_t sreg_prev;
-    // sreg_prev=SREG;
-    // cli();
-
-    if (i2c_initialized == 0) {
-        i2c_init();  // on pins D(1,0)
-        i2c_initialized = true;
-        _delay_ms(1000);
-    }
-    // i2c_init(); // on pins D(1,0)
-    // _delay_ms(1000);
-
-    // set pin direction
-    // - unused  : input  : 1
-    // - input   : input  : 1
-    // - driving : output : 0
-    mcp23018_status = i2c_start(I2C_ADDR_WRITE, I2C_TIMEOUT);    if (mcp23018_status) goto out;
-    mcp23018_status = i2c_write(IODIRA, I2C_TIMEOUT);            if (mcp23018_status) goto out;
-    mcp23018_status = i2c_write(0b10000000, I2C_TIMEOUT);        if (mcp23018_status) goto out;
-    mcp23018_status = i2c_write(0b11111111, I2C_TIMEOUT);        if (mcp23018_status) goto out;
-    i2c_stop();
-
-    // set pull-up
-    // - unused  : on  : 1
-    // - input   : on  : 1
-    // - driving : off : 0
-    mcp23018_status = i2c_start(I2C_ADDR_WRITE, I2C_TIMEOUT);    if (mcp23018_status) goto out;
-    mcp23018_status = i2c_write(GPPUA, I2C_TIMEOUT);             if (mcp23018_status) goto out;
-    mcp23018_status = i2c_write(0b10000000, I2C_TIMEOUT);        if (mcp23018_status) goto out;
-    mcp23018_status = i2c_write(0b11111111, I2C_TIMEOUT);        if (mcp23018_status) goto out;
-
-out:
-    i2c_stop();
-    // SREG=sreg_prev;
-    //uprintf("Init %x\n", mcp23018_status);
-    return mcp23018_status;
-}
-
-const keypos_t PROGMEM hand_swap_config[MATRIX_ROWS][MATRIX_COLS] = {
-    { {0,0}, {0,7}, {2,7}, {3,7} },
-    { {0,8}, {1,8}, {2,8}, {3,8} },
-    { {0,9}, {1,9}, {2,9}, {3,9} },
-    { {0,10}, {1,10}, {2,10}, {3,10} },
-    { {0,11}, {1,11}, {2,11}, {3,11} },
-    { {0,12}, {1,12}, {2,12}, {0,0} },
-    { {0,13}, {1,13}, {2,13}, {0,0} },
-
-    { {1,0}, {0,0}, {2,0}, {3,0} },
-    { {0,1}, {1,1}, {2,1}, {3,1} },
-    { {0,2}, {1,2}, {2,2}, {3,2} },
-    { {0,3}, {1,3}, {2,3}, {3,3} },
-    { {0,4}, {1,4}, {2,4}, {3,4} },
-    { {0,5}, {1,5}, {2,5}, {3,5} },
-    { {0,6}, {1,6}, {2,6}, {3,6} }
-};