diff options
Diffstat (limited to 'keyboards/fungo/rev1')
-rw-r--r-- | keyboards/fungo/rev1/config.h | 70 | ||||
-rw-r--r-- | keyboards/fungo/rev1/info.json | 97 | ||||
-rw-r--r-- | keyboards/fungo/rev1/post_config.h | 30 | ||||
-rw-r--r-- | keyboards/fungo/rev1/rev1.c | 17 | ||||
-rw-r--r-- | keyboards/fungo/rev1/rev1.h | 48 | ||||
-rw-r--r-- | keyboards/fungo/rev1/rules.mk | 28 |
6 files changed, 0 insertions, 290 deletions
diff --git a/keyboards/fungo/rev1/config.h b/keyboards/fungo/rev1/config.h deleted file mode 100644 index 5026099f7d..0000000000 --- a/keyboards/fungo/rev1/config.h +++ /dev/null @@ -1,70 +0,0 @@ -/* Copyright 2022 bojiguard (@bojiguard) - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#pragma once - - - -#include "config_common.h" - -/* Use I2C or Serial, not both */ -#define USE_SERIAL -#define SOFT_SERIAL_PIN D3 // RX8 - -/* select keyboard master board - I2C or Serial communication master */ -#define MASTER_RIGHT - - -/* key matrix size */ -// Rows are doubled-up -#define MATRIX_ROWS 12 -#define MATRIX_COLS 7 - -// wiring of each half -#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3, B2} -#define MATRIX_ROW_PINS { D4, C6, D7, E6, B4, B5} - -#define MATRIX_COL_PINS_RIGHT {F7, F6, F5, F4, B5, B4, E6} -#define MATRIX_ROW_PINS_RIGHT { D1, D0, D4, C6, D7, D3} // TX - - - - -/* COL2ROW, ROW2COL*/ -#define DIODE_DIRECTION COL2ROW - - - -/*************************************/ -/** public parameter **/ -/*************************************/ - -#define MATRIX_IO_DELAY 15 // default 30 -#define TAP_CODE_DELAY 50 // default 0, disabled - -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 3 - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE - -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -//지정된 횟수로 눌러야 토글됨 -#define TAPPING_TOGGLE 3 - - diff --git a/keyboards/fungo/rev1/info.json b/keyboards/fungo/rev1/info.json deleted file mode 100644 index 6941d70d81..0000000000 --- a/keyboards/fungo/rev1/info.json +++ /dev/null @@ -1,97 +0,0 @@ -{ - "keyboard_name": "FungoSplit", - "manufacturer": "Fungo", - "url": "https://github.com/bojiguard/", - "maintainer": "@bojiguard", - "usb": { - "vid": "0x5892", - "pid": "0x1233", - "device_version": "0.0.1" - }, - "layouts": { - "LAYOUT_fungo_split_num": { - "layout": [ - {"x":0, "y":0.375}, - {"x":1, "y":0.375}, - {"x":2, "y":0.125}, - {"x":3, "y":0}, - {"x":4, "y":0.125}, - {"x":5, "y":0.25}, - {"x":6, "y":0.5}, - {"x":12, "y":0.5}, - {"x":13, "y":0.25}, - {"x":14, "y":0.125}, - {"x":15, "y":0}, - {"x":16, "y":0.125}, - {"x":17, "y":0.375}, - {"x":18, "y":0.375}, - - {"x":0, "y":1.375}, - {"x":1, "y":1.375}, - {"x":2, "y":1.125}, - {"x":3, "y":1}, - {"x":4, "y":1.125}, - {"x":5, "y":1.25}, - {"x":6, "y":1.5}, - {"x":12, "y":1.5}, - {"x":13, "y":1.25}, - {"x":14, "y":1.125}, - {"x":15, "y":1}, - {"x":16, "y":1.125}, - {"x":17, "y":1.375}, - {"x":18, "y":1.375}, - - {"x":0, "y":2.375}, - {"x":1, "y":2.375}, - {"x":2, "y":2.125}, - {"x":3, "y":2}, - {"x":4, "y":2.125}, - {"x":5, "y":2.25}, - {"x":6, "y":2.5}, - {"x":12, "y":2.5}, - {"x":13, "y":2.25}, - {"x":14, "y":2.125}, - {"x":15, "y":2}, - {"x":16, "y":2.125}, - {"x":17, "y":2.375}, - {"x":18, "y":2.375}, - - {"x":0, "y":3.375}, - {"x":1, "y":3.375}, - {"x":2, "y":3.125}, - {"x":3, "y":3}, - {"x":4, "y":3.125}, - {"x":5, "y":3.25}, - {"x":6, "y":3.5}, - {"x":7, "y":4}, - {"x":8.25, "y":3.75}, - {"x":9.75, "y":3.75}, - {"x":11, "y":4}, - {"x":12, "y":3.5}, - {"x":13, "y":3.25}, - {"x":14, "y":3.125}, - {"x":15, "y":3}, - {"x":16, "y":3.125}, - {"x":17, "y":3.375}, - {"x":18, "y":3.375}, - - {"x":0, "y":4.375}, - {"x":1, "y":4.375}, - {"x":2, "y":4.25}, - {"x":3, "y":4.25}, - {"x":4.333, "y":4.25}, - {"x":5.667, "y":4.625}, - {"x":7, "y":5}, - {"x":8.25, "y":4.75}, - {"x":9.75, "y":4.75}, - {"x":11, "y":5}, - {"x":12.333, "y":4.625}, - {"x":13.667, "y":4.25}, - {"x":15, "y":4.25}, - {"x":16, "y":4.25}, - {"x":17, "y":4.375}, - {"x":18, "y":4.375} - ] - } - } -} diff --git a/keyboards/fungo/rev1/post_config.h b/keyboards/fungo/rev1/post_config.h deleted file mode 100644 index 16a06bf0c7..0000000000 --- a/keyboards/fungo/rev1/post_config.h +++ /dev/null @@ -1,30 +0,0 @@ -/* Copyright 2022 bojiguard (@bojiguard) - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - - -#pragma once - -#ifndef MK_3_SPEED -#define MK_3_SPEED -#endif - -#ifndef MOUSEKEY_INTERVAL -#define MOUSEKEY_INTERVAL 3 -#endif - -#ifndef MOUSEKEY_INITIAL_SPEED -#define MOUSEKEY_INITIAL_SPEED 20 -#endif
\ No newline at end of file diff --git a/keyboards/fungo/rev1/rev1.c b/keyboards/fungo/rev1/rev1.c deleted file mode 100644 index 5fd3a11049..0000000000 --- a/keyboards/fungo/rev1/rev1.c +++ /dev/null @@ -1,17 +0,0 @@ -/* Copyright 2022 bojiguard (@bojiguard) - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - - #include "fungo.h" diff --git a/keyboards/fungo/rev1/rev1.h b/keyboards/fungo/rev1/rev1.h deleted file mode 100644 index 97161482ff..0000000000 --- a/keyboards/fungo/rev1/rev1.h +++ /dev/null @@ -1,48 +0,0 @@ -/* Copyright 2022 bojiguard (@bojiguard) - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#pragma once - -#include "fungo.h" -#include "quantum.h" - - - -#define LAYOUT_fungo_split_num( \ - L00, L01, L02, L03, L04, L05, L06, R06, R05, R04, R03, R02, R01, R00, \ - L10, L11, L12, L13, L14, L15, L16, R16, R15, R14, R13, R12, R11, R10, \ - L20, L21, L22, L23, L24, L25, L26, R26, R25, R24, R23, R22, R21, R20, \ - L30, L31, L32, L33, L34, L35, L36, L46, L52, R52, R46, R36, R35, R34, R33, R32, R31, R30, \ - L50, L51, L40, L41, L42, L43, L44, L45, R45, R44, R43, R42, R41, R40, R51, R50 \ - ) \ - { \ - { L00, L01, L02, L03, L04, L05, L06}, \ - { L10, L11, L12, L13, L14, L15, L16}, \ - { L20, L21, L22, L23, L24, L25, L26}, \ - { L30, L31, L32, L33, L34, L35, L36}, \ - { L40, L41, L42, L43, L44, L45, L46}, \ - { L50, L51, L52, KC_NO, KC_NO, KC_NO, KC_NO}, \ - { R06, R05, R04, R03, R02, R01, R00}, \ - { R16, R15, R14, R13, R12, R11, R10}, \ - { R26, R25, R24, R23, R22, R21, R20}, \ - { R36, R35, R34, R33, R32, R31, R30}, \ - { R46, R45, R44, R43, R42, R41, R40}, \ - { KC_NO, KC_NO, KC_NO, KC_NO, R52, R51, R50}, \ - } - - - - diff --git a/keyboards/fungo/rev1/rules.mk b/keyboards/fungo/rev1/rules.mk deleted file mode 100644 index 4cfaca9bc3..0000000000 --- a/keyboards/fungo/rev1/rules.mk +++ /dev/null @@ -1,28 +0,0 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = caterina # controller pro micro -# BOOTLOADER = atmel-dfu # controller Elite-C - - - -# Build Options -# change yes to no to disable -# -BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite -MOUSEKEY_ENABLE = yes # Mouse keys -EXTRAKEY_ENABLE = no # Audio control and System control -CONSOLE_ENABLE = no # Console for debug -COMMAND_ENABLE = no # Commands for debug and configuration -NKRO_ENABLE = no # Enable N-Key Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -AUDIO_ENABLE = no # Audio output -KEY_LOCK_ENABLE = yes # kc_lock use - - -OLED_ENABLE = no -OLED_DRIVER = SSD1306 # OLED display -SPLIT_KEYBOARD = yes # split type - |